Re: synchronisation lost

> Hat Deine Conrad-Uhr überhaupt Empfang?

also ich hab die Batterie raus, gewartet bis sie sich synchronisiert
und siehe da Winterzeit. Aber meine Probleme bleiben die gleichen:

nach dem was Matthias geschrieben hat, läuft die Uhr nicht synchron mit dem
Sender.
Aber wie hinbekommen? Sie stellt sich ja richtig auf die Uhr ein (zumindest auf
die
Sekunde genau).

28 Oct 15:28:57 ntpd[377]: system event 'event_restart' (0x01) status
'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010)
28 Oct 15:28:58 ntpd[377]: peer PCF(0) event 'event_reach' (0x84) status
'unreach, conf, 1 event, event_reach' (0x8014)
28 Oct 15:33:16 ntpd[377]: system event 'event_peer/strat_chg' (0x04) status
'sync_alarm, sync_lf_clock, 2 events, event_restart' (0xc221)
28 Oct 15:33:11 ntpd[377]: time reset -4.308925 s
28 Oct 15:33:11 ntpd[377]: kernel time discipline status change 2041
28 Oct 15:33:11 ntpd[377]: synchronisation lost
28 Oct 15:33:11 ntpd[377]: system event 'event_clock_reset' (0x05) status
'sync_alarm, sync_unspec, 3 events, event_peer/strat_chg' (0xc034)
28 Oct 15:33:11 ntpd[377]: system event 'event_sync_chg' (0x03) status
'sync_alarm, sync_unspec, 4 events, event_clock_reset' (0xc045)
28 Oct 15:34:14 ntpd[377]: peer PCF(0) event 'event_reach' (0x84) status
'unreach, conf, 2 events, event_reach' (0x8024)
28 Oct 15:38:34 ntpd[377]: system event 'event_peer/strat_chg' (0x04) status
'sync_alarm, sync_lf_clock, 5 events, event_sync_chg' (0xc253)
28 Oct 15:38:34 ntpd[377]: system event 'event_sync_chg' (0x03) status
'leap_none, sync_lf_clock, 6 events, event_peer/strat_chg' (0x264)
28 Oct 15:38:34 ntpd[377]: system event 'event_peer/strat_chg' (0x04) status
'leap_none, sync_lf_clock, 7 events, event_sync_chg' (0x273)
28 Oct 16:28:52 ntpd[377]: offset 0.034403 sec freq 15.347 ppm error 0.009972
poll 6
28 Oct 17:28:52 ntpd[377]: offset 0.063989 sec freq 26.700 ppm error 0.199130
poll 6
28 Oct 17:39:02 ntpd[377]: time reset -0.223349 s
28 Oct 17:39:02 ntpd[377]: synchronisation lost
28 Oct 17:39:02 ntpd[377]: system event 'event_clock_reset' (0x05) status
'leap_none, sync_unspec, 8 events, event_peer/strat_chg' (0x84)
28 Oct 17:39:02 ntpd[377]: system event 'event_peer/strat_chg' (0x04) status
'leap_none, sync_unspec, 9 events, event_clock_reset' (0x95)
28 Oct 17:40:08 ntpd[377]: peer PCF(0) event 'event_reach' (0x84) status
'unreach, conf, 3 events, event_reach' (0x8034)
28 Oct 18:00:30 ntpd[377]: clock PCF(0) event 'clk_fault' (0x03)
28 Oct 18:01:35 ntpd[377]: time reset 0.253876 s
28 Oct 18:01:35 ntpd[377]: synchronisation lost
28 Oct 18:01:35 ntpd[377]: system event 'event_clock_reset' (0x05) status
'leap_none, sync_unspec, 12 events, event_peer/strat_chg' (0xc4)
28 Oct 18:01:35 ntpd[377]: system event 'event_peer/strat_chg' (0x04) status
'leap_none, sync_unspec, 13 events, event_clock_reset' (0xd5)
28 Oct 18:02:41 ntpd[377]: peer PCF(0) event 'event_reach' (0x84) status
'unreach, conf, 4 events, event_reach' (0x8044)
28 Oct 18:28:52 ntpd[377]: offset 0.125317 sec freq -93.757 ppm error 0.016507
poll 6
28 Oct 18:34:46 ntpd[377]: synchronisation lost
28 Oct 18:36:54 ntpd[377]: peer PCF(0) event 'event_unreach' (0x83) status
'unreach, conf, 5 events, event_unreach' (0x8053)

Danke für weitere Hilfe Tom

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Mon 28 Oct 2002 - 19:36:58 CET