CL SB Vibra16X

From: Adrian Stefan Skupien <Adrian(at)Skupien.de>
Date: 10 May 2000 22:32:00 +0200

Hi, people.

Hab immernoch ein Problem mit meiner Soundkarte.
Es ist eine Vibra16X PnP von Creative (also Soundblaster 16).
Ich benutze sie unter FreeBSD 4.0, wie man unten erkennen kann.

Schön und gut.

Problem: Wenn ich z.B. versuche, eine Datei (sei es mp3 oder WAV)
abzuspielen, geschieht nichts, der Prozess scheint zu hängen. Doch
wenn ich nachsehe, was mit dem /dev/sndstat oder /dev/dsp los ist,
so scheint alles ok zu sein, und das Gerät /dev/dsp ist nicht busy
(ausser ich weise einem Programm gerade an, etwas abzuspielen).

##### /var/run/dmesg.boot ###################################################################

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #2: Wed May 10 21:51:01 CEST 2000
    root@:/usr/src/sys/compile/HARDSTYLE
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 451023796 Hz
CPU: AMD-K6(tm) 3D processor (451.02-MHz 586-class CPU)
  Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 67043328 (65472K bytes)
config> di pcic0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 61882368 (60432K bytes)
Preloaded elf kernel "kernel" at 0xc02f2000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f209c.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 11
pci0: <AcerLabs M5237 (Aladdin-V) USB controller> at 2.0 irq 9
chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xdf80-0xdf9f irq 11 at device 8.0 on pci0
ed0: supplying EUI64: 00:00:e8:ff:fe:8c:f7:a5
ed0: address 00:00:e8:8c:f7:a5, type NE2000 (16 bit)
pci0: <unknown card> (vendor=0xe159, dev=0x0001) at 9.0 irq 5
pci0: <unknown card> (vendor=0x109e, dev=0x036e) at 10.0 irq 11
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 10.1 irq 11
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xffa0-0xffaf irq 0 at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,3 on isa0
sbc0: setting card to irq 5, drq 1, 3
pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc0
unknown0: <Game> at port 0x201 on isa0
ad0: 6197MB <IBM-DHEA-36480> [12592/16/63] at ata0-master using UDMA33
ata1-master: Aladdin: two atapi devices on this channel, no DMA
acd0: CDROM <CD-524E> at ata1-master using PIO3
ata1-slave: Aladdin: two atapi devices on this channel, no DMA
acd1: CD-R <CR-2801TE> at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s3a

##### /usr/src/sys/i386/conf ################################################################

# $FreeBSD: src/sys/i386/conf/HARDSTYLE v1.0 2000/05/10 14:43:10

machine i386
cpu I586_CPU
cpu I686_CPU
ident HARDSTYLE
maxusers 64

#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation

options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
#options MD_ROOT #MD is a potential root device
#options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
#options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extentions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies

device isa
device eisa
device pci

# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1

# ATA and ATAPI devices
#device ata0 at isa? port IO_WD1 irq 14
#device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices

# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12

device vga0 at isa?

# splash screen/screen saver
pseudo-device splash

# syscons is the default console driver, resembling an SCO console
device sc0 at isa?

# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
#device apm0 at nexus? disable flags 0x20 # Advanced Power Management

# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9

# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da

# PCI Ethernet NICs that use the common MII bus controller code.
device miibus # MII bus support
device rl # RealTek 8129/8139

# ISA Ethernet NICs.
device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
device ex
device ep
#device wi
#device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
device fe0 at isa? port 0x300
device le0 at isa? port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 irq 10 drq 0
device cs0 at isa? port 0x300
device sn0 at isa? port 0x300 irq 10
# requires PCCARD (PCMCIA) support to be activated
#device xe0 at isa?

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
#pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)

pseudo-device bpf #Berkeley packet filter

device pcm
device sbc

##### cat /dev/sndstat ######################################################################
FreeBSD Audio Driver (newpcm) May 10 2000 15:25:10
Installed devices:
pcm0: <SB DSP 4.16 (ViBRA16X)> at io 0x220 irq 5 drq 1:3 (1p/1r channels duplex)

adrian_stefan_skupien

-- 
alles ist eine vom    home of a.skupien / hardStyle development
tod umgebene insel       www.skupien.de / www.hardstyle.de
- Juan Montalvo -       info(at)skupien.de / info(at)hardstyle.de
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Wed 10 May 2000 - 22:31:37 CEST

search this site