TRIM soll aber tut nicht

From: Marc Santhoff <M.Santhoff(at)web.de>
Date: Sun, 04 Oct 2015 12:40:24 +0200

Tag allerseits,

ich habe jetzt endlich die SSD von neulich zumindest mal eingebaut und
in Betrieb genommen. Beim newfs brav -t -E angegeben. Leider klemmt da
irgendwas:

> dmesg | grep ad16

ad16: 228936MB <OCZ ARC100 1.01> at ata8-master UDMA100 SATA 6Gb/s
WARNING: /ad16: TRIM flag on fs but disk does not support TRIM

Hm. Heißt das jetzt, ich muß doch nochmal das Herstellertool benutzen
oder kann ich das mit FreeBSD-Bordmitteln einschalten oder so?

Auf der Schachtel steht jedenfalls groß "TRIM Support".

Mehr zum Laufwerk:

# atacontrol cap ad16

Protocol SATA revision 2.x
device model OCZ-ARC100
serial number A22L1061516000727
firmware revision 1.01
cylinders 16383
heads 16
sectors/track 63
lba supported 268435455 sectors
lba48 supported 468862128 sectors
dma supported
overlap not supported

Feature Support Enable Value Vendor
write cache yes yes
read ahead yes yes
Native Command Queuing (NCQ) yes - 31/0x1F
Tagged Command Queuing (TCQ) no no 31/0x1F
SMART yes yes
microcode download yes yes
security yes no
power management yes yes
advanced power management no no 0/0x00
automatic acoustic management no no 0/0x00 0/0x00

Ratlose Grüße,
Marc

-- 
Marc Santhoff <M.Santhoff(at)web.de>
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Sun 04 Oct 2015 - 12:43:07 CEST

search this site