Re: poptop freebsd 4.9

From: Otto Kucera <ok(at)72pixel.at>
Date: Thu, 26 Feb 2004 16:46:21 +0100

hallo christian!

ich hab jetzt mpd genommen und das geht ganz toll.

danke,
otto

Christian Gründemann wrote:

>Hallo Otto,
>
>nein, rc.conf ist zwar angepasst und selbst geschrieben, aber
>da dürfte nix drinstehen, was ppp beeinflussen sollte.
>Beim Kernel das gleiche.
>
>device ppp # Kernel PPP
>
>muß rein, aber ich denke, das ist klar.
>
>Hast Du ein Leerzeichen vor dem "set"? ppp ist zeimlich
>pingelig, was das angeht.
>
>Anonsten schicke mir nochmal dein ppp.conf file
>als Attachment.
>
>Viele Grüße,
>Christian
>
>
>
>
>>hallo christian!
>>
>>erst mal danke für deine antwort. pptp server mit mpd war keine mühe was
>>ich von poptop nicht behaupten kann :(.
>>ich hab deine config übernommen und bekomm immer übern syslogd folgende
>>fehler zurück:
>>
>>Feb 25 14:24:43 ns2 pppd[2505]: In file /etc/ppp/ppp.conf: unrecognized
>>option 'set'
>>Feb 25 14:24:43 ns2 pptpd[2504]: GRE: read(fd=5,buffer=804d500,len=8196)
>>from PTY failed: status = 0 error = No error
>>Feb 25 14:24:43 ns2 pptpd[2504]: CTRL: PTY read or GRE write failed
>>(pty,gre)=(5,6)
>>
>>hast du in der rc.conf irgendwas relewantes gesetzt? oder was im kernel
>>was nicht standart ist und damit zu tun haben könnte?
>>
>>otto
>>
>>Christian Gründemann wrote:
>>
>>
>>
>>>Hallo Otto,
>>>
>>>die Anleitung kenne ich auch.
>>>Ich erinnere mich so dunkel, dass ich genau das gleiche
>>>Problem hatte wie du! Allerdings weiß ich nicht mehr
>>>wie ich das Problem gelöst habe, es hatte jedenfalls nix
>>>mit pptpd zu tun, sondern mit dem ppp. Ich schick dir
>>>einfach mal meine funktionierenden config files. Es funktioniert
>>>bei mir unter 5.1 und 5.2.
>>>
>>>__pptpd.conf:
>>>option /etc/ppp/ppp.conf
>>>debug
>>>localip 192.168.0.1
>>>remoteip 192.168.0.10-30
>>>
>>>__ppp.conf
>>>loop:
>>>disable ipv6cp
>>>set timeout 0
>>>set log phase chat connect lcp ipcp command
>>>set device localhost:pptp
>>>set dial
>>>set login
>>>set ifaddr 192.168.0.1 192.168.0.10-192.168.0.30 255.255.255.0
>>>add default HISADDR
>>>set server /tmp/loop "" 0177
>>>
>>>loop-in:
>>>set timeout 0
>>>set log phase lcp ipcp command
>>>allow mode direct
>>>
>>>pptp:
>>>disable ipv6cp
>>>load loop
>>>enable chap
>>>disable pap
>>>enable mschapv2 mppe
>>>set mppe * *
>>>accept dns
>>># DNS Servers to assign client
>>>set dns 141.x..x.x
>>># NetBIOS/WINS Servers to assign client
>>>set nbns 192.168.23.1
>>>set device !/etc/ppp/secure
>>>
>>>
>>>wichtig ist, dass Du die Verschlüsselung mit
>>>enable mschapv2 mppe
>>>set mppe * *
>>>aktivierst. Bei den Windows Client mußt Du dann
>>>die mschapv2 angeben.
>>>
>>>
>>>Bei mir funktionert der pptpd daemon wirklich
>>>hervorragend, auch wenn die Inbetriebnahme etwas
>>>Zeit gefordert hat. Jedenfalls läuft er stabil, sowohl unter
>>>Last wie auch unter vielen unterschiedlichen zeitgleichen
>>>Anmeldungen.
>>>
>>>Ach ja, wenn Du weist woran es lag, lass es mich bitte wissen!
>>>
>>>Viel Erfolg,
>>>Christian
>>>
>>>
>>>
>>>
>>>
>>>>hallo christian!
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>>also erst mal danke für die antwort :)
>>>>
>>>>Christian Gründemann wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>Hallo Otto,
>>>>>
>>>>>was funktioniert denn nicht? Welches Howto (Windows/Unix)
>>>>>meinst du?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>also ich hab mir diese anleitung gefunden:
>>>>http://heyer.supranet.net/pptp
>>>>
>>>>starten tu ich pptpd:
>>>>/usr/local/sbin/pptpd --debug -l 213.225.xxx.xx --fg -c
>>>>/usr/local/etc/pptpd.conf
>>>>
>>>>/usr/sbin/pppd: unknown host: loop
>>>>Feb 24 23:37:15 gate pppd[2376]: unknown host: loop
>>>>Feb 24 23:37:15 gate pptpd[2375]: GRE:
>>>>read(fd=5,buffer=804da80,len=8196) from PTY failed: status = 0 error =
>>>>No error
>>>>Feb 24 23:37:15 gate pptpd[2375]: CTRL: PTY read or GRE write failed
>>>>(pty,gre)=(5,6)
>>>>
>>>>meine config:
>>>>also secure und ppp.secret brauchst du ja nicht :)
>>>>
>>>>pptpd.conf:
>>>>option /etc/ppp/ppp.conf
>>>>#listen 208.212.80.82
>>>>localip 10.0.20.1
>>>>remoteip 10.0.20.130-139
>>>>pidfile /var/run/pptpd.pid
>>>>
>>>>ppp.conf:
>>>>loop:
>>>>set timeout 0
>>>>set log phase chat connect lcp ipcp command
>>>>set device localhost:pptp
>>>>set dial
>>>>set login
>>>># Server (local) IP address, Range for Clients, and Netmask
>>>>set ifaddr 10.0.20.1 10.0.20.130-10.0.20.139 255.255.255.255
>>>>set server /tmp/loop "" 0177
>>>>
>>>>loop-in:
>>>>set timeout 0
>>>>set log phase lcp ipcp command
>>>>allow mode direct
>>>>
>>>>pptp:
>>>>load loop
>>>>enable chap
>>>>disable pap
>>>># Authenticate against /etc/passwd
>>>>##enable passwdauth
>>>>enable proxy
>>>>accept dns
>>>># DNS Servers to assign client
>>>>set dns 10.0.20.1
>>>># NetBIOS/WINS Servers to assign client
>>>>set nbns 10.0.20.1
>>>>set device !/etc/ppp/secure
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>Wenn Du es aus den Ports installiert, achte drauf, das die
>>>>>--with-bsdppp Var. gesetzt ist.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>hab ich gemacht. stand auch in der anleitung so drin.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>Viele Grüße,
>>>>>Christian
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>otto
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>
>>>>>
>>>>>>hallo!
>>>>>>
>>>>>>ich ärger mich gerade über poptop. weiß jemand ein how to das auch
>>>>>>funktioniert?
>>>>>>
>>>>>>otto
>>>>>>
>>>>>>--
>>>>>>-----------------------------------
>>>>>>Otto Kucera
>>>>>>A-1020 Wien Engerthstrasse 137/6/7
>>>>>>Tel: +43 699 1 942 30 91 [neue Nummer!]
>>>>>>Email: ok(at)72pixel.at
>>>>>>Icq: 65351173
>>>>>>-----------------------------------
>>>>>>
>>>>>>And root said rm -rf / ......and there was nothing
>>>>>>*BSD is like a wigwam: NO windows, NO gates and an Apache inside!
>>>>>>
>>>>>>Your mailserver MUST resolve properly (Fully Qualified Domain Name) or
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>the
>>>
>>>
>>>
>>>
>>>>>>
>>>>>>
>>>>>mail will not go through!
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
>>>>>>with "unsubscribe de-bsd-questions" in the body of the message
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
>>>>>with "unsubscribe de-bsd-questions" in the body of the message
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>--
>>>>-----------------------------------
>>>>Otto Kucera
>>>>A-1020 Wien Engerthstrasse 137/6/7
>>>>Tel: +43 699 1 942 30 91 [neue Nummer!]
>>>>Email: ok(at)72pixel.at
>>>>Icq: 65351173
>>>>-----------------------------------
>>>>
>>>>And root said rm -rf / ......and there was nothing
>>>>*BSD is like a wigwam: NO windows, NO gates and an Apache inside!
>>>>
>>>>Your mailserver MUST resolve properly (Fully Qualified Domain Name) or
>>>>
>>>>
>the
>
>
>>>>
>>>>
>>>mail will not go through!
>>>
>>>
>>>
>>>
>>>>To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
>>>>with "unsubscribe de-bsd-questions" in the body of the message
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>--
>>-----------------------------------
>>Otto Kucera
>>A-1020 Wien Engerthstrasse 137/6/7
>>Tel: +43 699 1 942 30 91 [neue Nummer!]
>>Email: ok(at)72pixel.at
>>Icq: 65351173
>>-----------------------------------
>>
>>And root said rm -rf / ......and there was nothing
>>*BSD is like a wigwam: NO windows, NO gates and an Apache inside!
>>
>>Your mailserver MUST resolve properly (Fully Qualified Domain Name) or the
>>
>>
>mail will not go through!
>
>
>>To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
>>with "unsubscribe de-bsd-questions" in the body of the message
>>
>>
>
>
>To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
>with "unsubscribe de-bsd-questions" in the body of the message
>
>
>

-- 
-----------------------------------
Otto Kucera
A-1020 Wien Engerthstrasse 137/6/7
Tel: +43 699 1 942 30 91 [neue Nummer!]
Email: ok(at)72pixel.at
Icq: 65351173
-----------------------------------
And root said rm -rf /     ......and there was nothing
*BSD is like a wigwam: NO windows, NO gates and an Apache inside!
Your mailserver MUST resolve properly (Fully Qualified Domain Name) or the mail will not go through!
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Thu 26 Feb 2004 - 16:54:55 CET

search this site