Re: poptop freebsd 4.9

From: Otto Kucera <ok(at)72pixel.at>
Date: Thu, 26 Feb 2004 16:45:03 +0100

hallo michael!

danke für deine hilfe aber ich hab mpd genommen und das geht ganz toll.

otto

Michael Schoensee wrote:

> Christian Gründemann wrote:
>
>> Hallo Otto,
>>
>> nein, rc.conf ist zwar angepasst und selbst geschrieben, aber
>> da dürfte nix drinstehen, was ppp beeinflussen sollte.
>> Beim Kernel das gleiche.
>>
>> device ppp # Kernel PPP
>>
>> muß rein, aber ich denke, das ist klar.
>>
>> Hast Du ein Leerzeichen vor dem "set"? ppp ist zeimlich
>> pingelig, was das angeht.
>>
>>
>>
> Genau, muss mindestens ein Leerzeichen haben. (man ppp)
>
> Oder Du versuchst eine minimal Konfiguration, und baust
> darauf dann nach und nach auf, hier eine die nicht authentifiziert
> und einfach so rein lässt, beachte das nur die Linien
> "default:" und "pptp:" kein Leerzeichen haben:
>
> /etc/ppp/ppp.conf:
>
> default:
> set log Phase Chat LCP IPCP CCP tun command
>
> pptp:
> allow mode direct
> enable lqr
> set timeout 0
> #set radius /etc/radius.conf
> #enable pap
> #enable chap
> enable proxy
> accept dns
> #set ifaddr 10.0.0.254
> set ifaddr 10.0.0.254 10.0.0.1
> set dns 10.210.200.254
>
> und hier /usr/local/etc/pptpd.conf:
>
> option /etc/ppp/ppp.conf
>
> In einem WinXP musst du dann noch erlauben das
> unverschlüsselt gearbeitet wird.
>
> Saludos
>
>
>> Anonsten schicke mir nochmal dein ppp.conf file
>> als Attachment.
>>
>> Viele Grüße,
>> Christian
>>
>>
>>
>>
>>> hallo christian!
>>>
>>> erst mal danke für deine antwort. pptp server mit mpd war keine mühe
>>> was
>>> ich von poptop nicht behaupten kann :(.
>>> ich hab deine config übernommen und bekomm immer übern syslogd folgende
>>> fehler zurück:
>>>
>>> Feb 25 14:24:43 ns2 pppd[2505]: In file /etc/ppp/ppp.conf: unrecognized
>>> option 'set'
>>> Feb 25 14:24:43 ns2 pptpd[2504]: GRE:
>>> read(fd=5,buffer=804d500,len=8196)
>>> from PTY failed: status = 0 error = No error
>>> Feb 25 14:24:43 ns2 pptpd[2504]: CTRL: PTY read or GRE write failed
>>> (pty,gre)=(5,6)
>>>
>>> hast du in der rc.conf irgendwas relewantes gesetzt? oder was im kernel
>>> was nicht standart ist und damit zu tun haben könnte?
>>>
>>>
>>
>
> To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
> with "unsubscribe de-bsd-questions" in the body of the message
>

-- 
-----------------------------------
Otto Kucera
A-1020 Wien Engerthstrasse 137/6/7
Tel: +43 699 1 942 30 91 [neue Nummer!]
Email: ok(at)72pixel.at
Icq: 65351173
-----------------------------------
And root said rm -rf /     ......and there was nothing
*BSD is like a wigwam: NO windows, NO gates and an Apache inside!
Your mailserver MUST resolve properly (Fully Qualified Domain Name) or the mail will not go through!
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Thu 26 Feb 2004 - 16:53:34 CET

search this site