Proxim Harmony PCI Installationsprobleme

Hallo,

ich habe mir eine Proxim Harmony 802.11b PCI Karte gekauft und
versuche sie unter FreeBSD zum laufen zu bekommen.
Das Problem ist dass ifconfig -a kein wi Device anzeigt. Ich hab
aber in der Kernelkonfiguration device wi mit einkompiliert.

Hat die schon jemand am laufen?

Jetzt kommen ein paar Ausgaben von diversen Programmen:

scanpci sagt:
pci bus 0x0000 cardnum 0x0b function 0x00: vendor 0x1013 device
0x1100
 Cirrus Logic CL 6729

Das ist wohl der pcmcia Adapter.

Und hier noch etwas längeres

root(at)zeus:~> pccardc dumpcis
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
    000: 00 00 ff
        Common memory device information:
                Device number 1, type No device, WPS = OFF
                Speed = No speed, Memory block size = 512b, 1
units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4
    000: 67 5a 08 ff
        Attribute memory device information:
                Device number 1, type SRAM, WPS = OFF
                Speed = 5.0 x 100 ns, Memory block size = 512b, 2
units
Tuple #3, code = 0x1d (Other conditions for attribute memory),
length = 5
    000: 03 67 5a 08 ff
        (MWAIT) (3V card)
Tuple #4, code = 0x15 (Version 1 info), length = 80
    000: 05 00 50 52 4f 58 49 4d 00 4c 41 4e 20 50 43 49
    010: 20 43 41 52 44 20 48 41 52 4d 4f 4e 59 20 38 30
    020: 32 31 31 42 00 00 00 00 00 00 00 00 00 00 00 00
    030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
        Version = 5.0, Manuf = [PROXIM], card vers = [LAN PCI
CARD HARMONY 80211
B]
        Addit. info = [],[]
Tuple #5, code = 0x20 (Manufacturer ID), length = 4
    000: 26 01 02 00
        PCMCIA ID = 0x126, OEM ID = 0x2
Tuple #6, code = 0x21 (Functional ID), length = 2
    000: 06 00
        Network/LAN adapter
Tuple #7, code = 0x22 (Functional EXT), length = 2
    000: 01 07
        Network technology: Wireless
Tuple #8, code = 0x22 (Functional EXT), length = 5
    000: 02 40 42 0f 00
        Network speed: 1 Mb/sec
Tuple #9, code = 0x22 (Functional EXT), length = 5
    000: 02 80 84 1e 00
        Network speed: 2 Mb/sec
Tuple #10, code = 0x22 (Functional EXT), length = 5
    000: 02 60 ec 53 00
        Network speed: 5 Mb/sec
Tuple #11, code = 0x22 (Functional EXT), length = 5
    000: 02 c0 d8 a7 00
        Network speed: 11 Mb/sec
Tuple #12, code = 0x22 (Functional EXT), length = 2
    000: 03 07
        Network media: 2.4 GHz
Tuple #13, code = 0x22 (Functional EXT), length = 8
    000: 04 06 00 00 f0 64 00 00
        Network node ID: 00 00 f0 64 00 00
Tuple #14, code = 0x22 (Functional EXT), length = 2
    000: 05 01
        Network connector: closed connector standard
Tuple #15, code = 0x1a (Configuration map), length = 7
    000: 03 01 e0 03 00 00 01
        Reg len = 4, config register addr = 0x3e0, last config =
0x1
        Registers: X-------
Tuple #16, code = 0x1b (Configuration entry), length = 13
    000: c1 01 09 77 b5 1e 35 b5 3c 36 36 05 46
        Config index = 0x1(default)
        Interface byte = 0x1 (I/O)
        Vcc pwr:
                Nominal operating supply voltage: 3 x 1V, ext =
0x1e
                Minimum operating supply voltage: 3 x 1V
                Maximum operating supply voltage: 3 x 1V, ext =
0x3c
                Max current average over 1 second: 3 x 100mA
                Max current average over 10 ms: 3 x 100mA
                Power down supply current: 1 x 10mA
        Card decodes 6 address lines, limited 8/16 Bit I/O
Tuple #17, code = 0xff (Terminator), length = 0
2 slots found

Cheers,
                Oliver

-- 
http://www.baily.de/
To Unsubscribe: send mail to majordomo.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message