Internes Modem installieren

Hallo!

Ich habe mir ein internes analoges Modem gekauft und möchte
dieses nun in meinem 4.8-System installieren, da ich damit faxen
möchte. Aber ich glaube irgendwie erkennt er das Modem nicht.
Folgendes steht in /var/log/messages:

Jul 12 21:37:41 home /kernel: CPU: AMD Athlon(tm) Processor (1001.78-MHz 686-class CPU)
Jul 12 21:37:41 home /kernel: Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Jul 12 21:37:41 home /kernel: Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
Jul 12 21:37:41 home /kernel: AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
Jul 12 21:37:41 home /kernel: real memory = 536739840 (524160K bytes)
Jul 12 21:37:41 home /kernel: avail memory = 516952064 (504836K bytes)
Jul 12 21:37:41 home /kernel: Preloaded elf kernel "kernel" at 0xc0529000.
Jul 12 21:37:41 home /kernel: Pentium Pro MTRR support enabled
Jul 12 21:37:41 home /kernel: md0: Malloc disk
Jul 12 21:37:41 home /kernel: Using $PIR table, 8 entries at 0xc00f5a90
Jul 12 21:37:41 home /kernel: npx0: <math processor> on motherboard
Jul 12 21:37:41 home /kernel: npx0: INT 16 interface
Jul 12 21:37:41 home /kernel: pcib0: <Host to PCI bridge> on motherboard
Jul 12 21:37:41 home /kernel: pci0: <PCI bus> on pcib0
Jul 12 21:37:41 home /kernel: agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
Jul 12 21:37:41 home /kernel: pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0
Jul 12 21:37:41 home /kernel: pci1: <PCI bus> on pcib1
Jul 12 21:37:41 home /kernel: pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 11
Jul 12 21:37:41 home /kernel: isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
Jul 12 21:37:41 home /kernel: isa0: <ISA bus> on isab0
Jul 12 21:37:41 home /kernel: atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1 on pci0
Jul 12 21:37:41 home /kernel: ata0: at 0x1f0 irq 14 on atapci0
Jul 12 21:37:41 home /kernel: ata1: at 0x170 irq 15 on atapci0
Jul 12 21:37:41 home /kernel: uhci0: <VIA 83C572 USB controller> port 0xef40-0xef5f irq 10 at device 7.2 on pci0
Jul 12 21:37:41 home /kernel: usb0: <VIA 83C572 USB controller> on uhci0
Jul 12 21:37:41 home /kernel: usb0: USB revision 1.0
Jul 12 21:37:41 home /kernel: uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jul 12 21:37:41 home /kernel: uhub0: 2 ports with 2 removable, self powered
Jul 12 21:37:41 home /kernel: uhci1: <VIA 83C572 USB controller> port 0xef80-0xef9f irq 10 at device 7.3 on pci0
Jul 12 21:37:41 home /kernel: usb1: <VIA 83C572 USB controller> on uhci1
Jul 12 21:37:41 home /kernel: usb1: USB revision 1.0
Jul 12 21:37:41 home /kernel: uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jul 12 21:37:41 home /kernel: uhub1: 2 ports with 2 removable, self powered
Jul 12 21:37:41 home /kernel: pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
Jul 12 21:37:41 home /kernel: pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 9.0 irq 9
Jul 12 21:37:41 home /kernel: wb0: <Winbond W89C840F 10/100BaseTX> port 0xec00-0xec7f mem 0xfebffc00-0xfebffc7f irq 10 at device 10.0 on pci0
Jul 12 21:37:41 home /kernel: wb0: Ethernet address: 00:00:e8:21:97:ac
Jul 12 21:37:41 home /kernel: miibus0: <MII bus> on wb0
Jul 12 21:37:41 home /kernel: amphy0: <Am79C873 10/100 media interface> on miibus0
Jul 12 21:37:41 home /kernel: amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Jul 12 21:37:41 home /kernel: pci0: <unknown card> (vendor=0x10b9, dev=0x5459) at 12.0 irq 5
Jul 12 21:37:41 home /kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xfebff400-0xfebff4ff irq 9 at device 13.0 on pci0
Jul 12 21:37:41 home /kernel: rl0: Ethernet address: 00:e0:7d:87:90:76
Jul 12 21:37:41 home /kernel: miibus1: <MII bus> on rl0
Jul 12 21:37:41 home /kernel: rlphy0: <RealTek internal media interface> on miibus1
Jul 12 21:37:41 home /kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Jul 12 21:37:41 home /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Jul 12 21:37:41 home /kernel: fdc0: FIFO enabled, 8 bytes threshold
Jul 12 21:37:41 home /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Jul 12 21:37:41 home /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Jul 12 21:37:41 home /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Jul 12 21:37:41 home /kernel: kbd0 at atkbd0
Jul 12 21:37:41 home /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Jul 12 21:37:41 home /kernel: psm0: model Generic PS/2 mouse, device ID 0
Jul 12 21:37:41 home /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Jul 12 21:37:41 home /kernel: sc0: <System console> at flags 0x100 on isa0
Jul 12 21:37:41 home /kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Jul 12 21:37:42 home /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Jul 12 21:37:42 home /kernel: sio0: type 16550A
Jul 12 21:37:42 home /kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
Jul 12 21:37:42 home /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Jul 12 21:37:42 home /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Jul 12 21:37:42 home /kernel: ppc0: FIFO with 16/16/8 bytes threshold
Jul 12 21:37:42 home /kernel: plip0: <PLIP network interface> on ppbus0
Jul 12 21:37:42 home /kernel: lpt0: <Printer> on ppbus0
Jul 12 21:37:42 home /kernel: lpt0: Interrupt-driven port
Jul 12 21:37:42 home /kernel: ppi0: <Parallel I/O> on ppbus0
Jul 12 21:37:42 home /kernel: ad2: 19470MB <QUANTUM FIREBALLlct15 20> [39560/16/63] at ata1-master UDMA66
Jul 12 21:37:42 home /kernel: acd0: CDROM <CRD-8483B> at ata0-master PIO4

Ausser dem Modem habe ich noch 2 Netzwerkkarten und eine Soundkarte
drin (und eine AGP).
ifconfig gibt folgendes aus:

wb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.0.210 netmask 0xffffff00 broadcast 192.168.0.255
        inet6 fe80::200:e8ff:fe21:97ac%wb0 prefixlen 64 scopeid 0x1
        ether 00:00:e8:21:97:ac
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::2e0:7dff:fe87:9076%rl0 prefixlen 64 scopeid 0x2
        ether 00:e0:7d:87:90:76
        media: Ethernet autoselect (10baseT/UTP)
        status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
        inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
        inet 80.136.51.5 --> 217.5.98.75 netmask 0xffffffff
        Opened by PID 58

Ist lo0 etwa das Modem? Wenn ja, wie kann ich dann z.B. mit efax drauf
zugreifen?

Besten Dank und Gruß,
Andy

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Sat 12 Jul 2003 - 21:47:07 CEST