© 1995-2013 by The FreeBSD Project. All rights reserved.URL: http://lists.de.freebsd.org
On 5/26/2003 2:31 PM, Bernd Walter wrote:
> Mit einem CD-ROM wirst du kaum eine Wide Verkabelung terminieren können.
> Es sei denn die Platten und Verkabelung sind auch vollständig 8 bit.
> Du solltest nicht nur die ID Jumper prüfen, sondern alle anderen
> ebenfalls, ich kann den Fall nicht zuordnen, aber bei IBM hat man schon
> mal recht exotische Features - würde mich also nicht wundern.
Sorry, dmesg vergessen.
Gruss,
Jens
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA #0: Wed May 14 21:35:23 GMT 2003
root(at)webdev.muppets.liwing.de:/usr/obj/usr/src/sys/WEBDEV
Preloaded elf kernel "/boot/kernel/kernel" at 0xc047f000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc047f21c.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 299749101 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (299.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping = 4
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 268423168 (255 MB)
avail memory = 255721472 (243 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Pentium Pro MTRR support enabled
VESA: v2.0, 512k memory, flags:0x1, mode table:0xc03b89e2 (1000022)
VESA: PERMEDIA 2.
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM CDTPWSNG> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f2260
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfd08-0xfd0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 11
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
IOAPIC #0 intpin 16 -> irq 14
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 2.1 (no driver attached)
pci0: <serial bus, USB> at device 2.2 (no driver attached)
piix0 port 0xfe00-0xfe0f at device 2.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x70e0-0x70ff mem 0xf6e00000-0xf6efffff,0xf6cff000-0xf6cfffff irq 2 at device 3.0 on pci0
fxp0: Ethernet address 00:60:94:b9:42:46
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseT4
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x7400-0x74ff mem 0xf6dfe000-0xf6dfefff irq 11 at device 9.0 on pci0
aic7895: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0x7800-0x78ff mem 0xf6dff000-0xf6dfffff irq 11 at device 9.1 on pci0
aic7895: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
orm0: <Option ROM> at iomem 0xc7000-0xcb7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
Waiting 15 seconds for SCSI devices to settle
da1 at ahc1 bus 0 target 1 lun 0
da1: <SEAGATE ST318418N 0003> Fixed Direct Access SCSI-3 device
da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da1: 19001MB (38914049 512 byte sectors: 255H 63S/T 2422C)
SMP: AP CPU #1 Launched!
cd1 at ahc1 bus 0 target 3 lun 0
cd1: <TOSHIBA CD-ROM XM-3701TA 3055> Removable CD-ROM SCSI-2 device
cd1: 4.901MB/s transfers (4.901MHz, offset 15)
cd1: cd present [113090 x 2048 byte records]
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330W !# S69D> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
cd0 at ahc1 bus 0 target 2 lun 0
cd0: <YAMAHA CDR200t 1.00> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [316347 x 2048 byte records]
Mounting root from ufs:/dev/da0s1a
IP Filter: already initialized
IP Filter: already initialized
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Mon 26 May 2003 - 14:57:42 CEST