Re: Notebook die 2te

From: Harald Neuffer <neuf(at)>
Date: Wed, 14 May 2003 11:14:16 +0200

Hendrik Spiegel wrote:

> 2.IBM ThinkPad R40 2722-3GG
> oben ganz rechts
> Pentium M 1,3GHz, vermutlich i855 Chipsatz
> ATI Mobility Radeon 7500, 32MB
> Kombo-Laufwerk
> Intel Mini-PCI WLan Karte


ich habe hier ein IBM R32 laufen. Geht alles ohne Probleme. Auch die
eingebaute Dual WLAN-Modem Mini-PCI-Karte läuft (Das Modem natürlich
nicht, weil es ein winmodem ist). Hier mein dmesg:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
FreeBSD 4.7-STABLE #0: Tue Jan 28 18:04:02 CET 2003
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz (1199.87-MHz 686-class
  Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
real memory = 267845632 (261568K bytes)
avail memory = 256872448 (250852K bytes)
Preloaded elf kernel "kernel" at 0xc03b3000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00fdef0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at
device 0.0 on pci0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on
pci2: <PCI bus> on pcib2
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 7.0
on pci2
wi0: 802.11 address: 00:20:e0:8e:1c:a5
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.06
fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem
0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:00:e2:82:d1:5a
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 11 at device 9.0 on pci2
pcic0: PCI Memory allocated: 0x88000000
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa
pccard0: <PC Card 16-bit bus (classic)> on pcic0
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq
11 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at
device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
eisa0: <EISA bus> on motherboard
eisa0: unknown card @H(at)0000 (0x01000000) at slot 1
orm0: <Option ROMs> at iomem
0xc0000-0xcefff,0xd0000-0xd17ff,0xe0000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ata1-slave: ATAPI identify retries exceeded
ad0: 19077MB <IC25N020ATCS04-0> [41344/15/63] at ata0-master UDMA100
acd0: DVD-ROM <HL-DT-STDVD-ROM GDR8081N> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a

Einziger Nachteil ist, daß das Laptop keinen seriellen Anschluß hat.

Vorsicht bei dem IBM R31, da macht der eingebaute i830m Probleme mit
XFree86, obwohl es jetzt langsam stabil läuft. Das R32 hatte diese
Probleme nicht, weil es eine eigene Grafikkarte hat.

Gruß Harald

To Unsubscribe: send mail to majordomo(at)
with "unsubscribe de-bsd-questions" in the body of the message
Received on Wed 14 May 2003 - 11:21:49 CEST

search this site