pppoe Problem

From: Christoph Kukulies <kuku(at)physik.rwth-aachen.de>
Date: Wed, 29 Jan 2003 20:44:48 +0100

Ich habe gerade von T-Online flat rate auf einen anderen Provider gewechselt,
der mir eine feste IP anbietet (www.kamp.net).

In der Eroeffnungsmail bekam ich mitgeteilt, ich solle mtu auf 1460 setzen.

Ich hatte noch den tonline Eintrag und habe davon einen
neuen gemacht in ppp.conf. Und dann dort wo set mru 1492/mtu 1492 stand
1460 eingesetzt.

Erst hat der Gegenpubkt PAP verlangt, habe ich pap enabled.

Dann bricht er jetzt ab wegen Too Many LCP REQs.

Hat jemand eine Idee?

Hier einiges an log:

Jan 29 20:24:39 mygtwy ppp[124]: tun0: Phase: bundle: Establish
Jan 29 20:24:39 mygtwy ppp[124]: tun0: Phase: kamp: closed -> opening
Jan 29 20:24:41 mygtwy ppp[124]: tun0: Phase: kamp: Connected!
Jan 29 20:24:41 mygtwy ppp[124]: tun0: Phase: kamp: opening -> dial
Jan 29 20:24:41 mygtwy ppp[124]: tun0: Chat: kamp: Dial attempt 1 of 1
Jan 29 20:24:41 mygtwy ppp[124]: tun0: Phase: kamp: dial -> carrier
Jan 29 20:24:42 mygtwy ppp[124]: tun0: Phase: Received NGM_PPPOE_SUCCESS (hook
 "tun0")
Jan 29 20:24:42 mygtwy ppp[124]: tun0: Phase: kamp: carrier -> login
Jan 29 20:24:42 mygtwy ppp[124]: tun0: Phase: kamp: login -> lcp
Jan 29 20:24:42 mygtwy ppp[124]: tun0: LCP: FSM: Using "kamp" as a transport
Jan 29 20:24:42 mygtwy ppp[124]: tun0: LCP: kamp: State change Initial --> Clo
sed
Jan 29 20:24:42 mygtwy ppp[124]: tun0: LCP: kamp: State change Closed --> Stop
ped
Jan 29 20:24:42 mygtwy ppp[124]: tun0: LCP: kamp: RecvConfigReq(108) state = S
topped
Jan 29 20:24:42 mygtwy ppp[124]: tun0: LCP: MRU[4] 1492
Jan 29 20:24:42 mygtwy ppp[124]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
Jan 29 20:24:42 mygtwy ppp[124]: tun0: LCP: MAGICNUM[6] 0x066fcf8c
Jan 29 20:24:42 mygtwy ppp[124]: tun0: LCP: kamp: SendConfigReq(1) state = Sto
pped
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: ACFCOMP[2]
  
....
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: ACFCOMP[2]
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: PROTOCOMP[2]
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: MRU[4] 1460
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: MAGICNUM[6] 0x684ed9a0
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: kamp: SendConfigAck(108) state = S
topped
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: MRU[4] 1492
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: MAGICNUM[6] 0x066fcf8c
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: kamp: LayerStart
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: kamp: State change Stopped --> Ack
-Sent
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: kamp: RecvConfigRej(1) state = Ack
-Sent
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: kamp: SendConfigReq(2) state = Ack
-Sent
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: ACFCOMP[2]
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: PROTOCOMP[2]
Jan 29 20:24:43 mygtwy ppp[124]: tun0: LCP: ACCMAP[6] 0x00000000
...
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: kamp: RecvConfigRej(15) state = Ac
k-Sent
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: kamp: SendConfigReq(16) state = Ac
k-Sent
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: ACFCOMP[2]
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: PROTOCOMP[2]
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: MRU[4] 1460
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: MAGICNUM[6] 0x684ed9a0
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: kamp: RecvConfigRej(16) state = Ac
k-Sent
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
Jan 29 20:24:44 mygtwy ppp[124]: tun0: Phase: kamp: Too many LCP REQs sent - a
bandoning negotiation
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: kamp: SendTerminateReq(17) state =
 Ack-Sent
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: kamp: State change Ack-Sent --> Cl
osing
Jan 29 20:24:44 mygtwy ppp[124]: tun0: LCP: kamp: RecvTerminateAck(17) state =
 Closing

Hab's auch noch mit mtu/mru 1492 versucht. Das Interface (tun0) zeigt
uebrigens MTU 1500 an.

Irgendwelche Ideen?

--
Chris Christoph P. U. Kukulies mygtwy(at)rwth-aachen.de
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Wed 29 Jan 2003 - 20:44:53 CET

search this site