synchronisation lost

From: Thomas Beer <tbeer(at)analogon.com>
Date: Sun, 27 Oct 2002 12:46:30 +0100

Hi,

nachdem pcfclock gestern reibungslos funktionierte sperrt er sich heute mit
einem synchronization lost. Wenn ich von einem Client aus eine Anfrage
stelle antwortet mir dieser ebenfalls, dass die Synchronisation nicht stimmt.
Ich frage mich nun, wieso er die Synchronisation nicht mehr hinbekommt.
Mit der heutigen Zeitumstellung wird es wohl nichts zu tun haben?
Der Display der Conrad Uhr zeigt die Sommerzeit an, wober FreeBSD sich
automatische auf Winterzeit umgestellt hat.

Für Tips immer dankbar Tom

26 Oct 23:14:09 ntpd[5233]: offset -0.034879 sec freq 2.559 ppm error 0.058629
poll 6
27 Oct 00:14:09 ntpd[5233]: offset -0.038516 sec freq 5.908 ppm error 0.057251
poll 6
27 Oct 01:14:09 ntpd[5233]: offset -0.040223 sec freq 8.516 ppm error 0.057999
poll 6
27 Oct 02:14:09 ntpd[5233]: offset -0.043191 sec freq 10.719 ppm error 0.059224
poll 6
27 Oct 02:14:09 ntpd[5233]: offset -0.091455 sec freq 11.127 ppm error 0.063987
poll 6
27 Oct 02:18:37 ntpd[5233]: clock PCF(0) event 'clk_fault' (0x03)
27 Oct 02:24:05 ntpd[5233]: synchronisation lost
27 Oct 02:26:14 ntpd[5233]: peer PCF(0) event 'event_unreach' (0x83) status
'unreach, conf, 2 events, event_unreach' (0x8023)
27 Oct 03:14:09 ntpd[5233]: offset -0.030864 sec freq 10.010 ppm error 0.049778
poll 4
27 Oct 04:14:09 ntpd[5233]: offset -0.030864 sec freq 10.010 ppm error 0.049778
poll 4
27 Oct 05:14:09 ntpd[5233]: offset -0.030864 sec freq 10.010 ppm error 0.049778
poll 4
27 Oct 06:14:09 ntpd[5233]: offset -0.030864 sec freq 10.010 ppm error 0.049778
poll 4
27 Oct 07:14:09 ntpd[5233]: offset -0.030864 sec freq 10.010 ppm error 0.049778
poll 4
27 Oct 08:14:09 ntpd[5233]: offset -0.030864 sec freq 10.010 ppm error 0.049778
poll 4
27 Oct 09:14:09 ntpd[5233]: offset -0.030864 sec freq 10.010 ppm error 0.049778
poll 4
27 Oct 10:03:44 ntpd[5233]: ntpd exiting on signal 15
27 Oct 10:03:48 ntpd[6118]: system event 'event_restart' (0x01) status
'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010)
27 Oct 10:03:50 ntpd[6118]: clock PCF(0) event 'clk_fault' (0x03)
27 Oct 11:03:48 ntpd[6118]: offset 0.000000 sec freq 10.010 ppm error 0.000001
poll 4
27 Oct 12:03:48 ntpd[6118]: offset 0.000000 sec freq 10.010 ppm error 0.000001
poll 4
27 Oct 12:36:58 ntpd[6118]: ntpd exiting on signal 15
27 Oct 12:37:03 ntpd[6323]: system event 'event_restart' (0x01) status
'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010)
27 Oct 12:37:07 ntpd[6323]: clock PCF(0) event 'clk_fault' (0x03)

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Sun 27 Oct 2002 - 12:46:53 CET

search this site