Hi people,
nun habe ich schon so ziemlich alles versucht, was ich aus dem Leenoox
bereich kenne, um meine Karte unter FreeBSD zum Klimpern zu bringen.
Kann mir jemand helfen? In FreeBSD bin ich ein ziemlicher Neuling.
Ich habe diese Sache schon mehrmals gepostet, für Kopie siehe unten.
Ergänzungen: Wenn ich z.B. versuche, eine mp3-Datei mittels Kmp3
abzuspielen, so scheint der Prozess zu hängen und auf dem Terminal
wird mir angezeigt:
Fatal IO Error, Cleaning Up.
(oder ähnliches)
Was ist da zu tun? Wo liegt mein Fehler?
adrian_stefan_skupien
-- alles ist eine vom home of a.skupien / hardStyle development tod umgebene insel www.skupien.de / www.hardstyle.de - Juan Montalvo - info(at)skupien.de / info(at)hardstyle.de ==================[COPY_OF_MESSAGE]==================================================================== Hi, people. Hab immernoch ein Problem mit meiner Soundkarte. Es ist eine Vibra16X PnP von Creative (also Soundblaster 16). Ich benutze sie unter FreeBSD 4.0, wie man unten erkennen kann. Schön und gut. Problem: Wenn ich z.B. versuche, eine Datei (sei es mp3 oder WAV) abzuspielen, geschieht nichts, der Prozess scheint zu hängen. Doch wenn ich nachsehe, was mit dem /dev/sndstat oder /dev/dsp los ist, so scheint alles ok zu sein, und das Gerät /dev/dsp ist nicht busy (ausser ich weise einem Programm gerade an, etwas abzuspielen). ##### /var/run/dmesg.boot ################################################################### Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-RELEASE #2: Wed May 10 21:51:01 CEST 2000 root@:/usr/src/sys/compile/HARDSTYLE Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 451023796 Hz CPU: AMD-K6(tm) 3D processor (451.02-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 67043328 (65472K bytes) config> di pcic0 No such device: pcic0 Invalid command or syntax. Type `?' for help. config> di sn0 config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di cs0 config> di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config> di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config> di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config> di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config> q avail memory = 61882368 (60432K bytes) Preloaded elf kernel "kernel" at 0xc02f2000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f209c. md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 11 pci0: <AcerLabs M5237 (Aladdin-V) USB controller> at 2.0 irq 9 chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0 isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xdf80-0xdf9f irq 11 at device 8.0 on pci0 ed0: supplying EUI64: 00:00:e8:ff:fe:8c:f7:a5 ed0: address 00:00:e8:8c:f7:a5, type NE2000 (16 bit) pci0: <unknown card> (vendor=0xe159, dev=0x0001) at 9.0 irq 5 pci0: <unknown card> (vendor=0x109e, dev=0x036e) at 10.0 irq 11 pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 10.1 irq 11 atapci0: <AcerLabs Aladdin ATA33 controller> port 0xffa0-0xffaf irq 0 at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/1 bytes threshold ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,3 on isa0 sbc0: setting card to irq 5, drq 1, 3 pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc0 unknown0: <Game> at port 0x201 on isa0 ad0: 6197MB <IBM-DHEA-36480> [12592/16/63] at ata0-master using UDMA33 ata1-master: Aladdin: two atapi devices on this channel, no DMA acd0: CDROM <CD-524E> at ata1-master using PIO3 ata1-slave: Aladdin: two atapi devices on this channel, no DMA acd1: CD-R <CR-2801TE> at ata1-slave using PIO3 Mounting root from ufs:/dev/ad0s3a ##### /usr/src/sys/i386/conf ################################################################ # $FreeBSD: src/sys/i386/conf/HARDSTYLE v1.0 2000/05/10 14:43:10 machine i386 cpu I586_CPU cpu I686_CPU ident HARDSTYLE maxusers 64 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem #options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extentions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices #device ata0 at isa? port IO_WD1 irq 14 #device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support device rl # RealTek 8129/8139 # ISA Ethernet NICs. device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex device ep #device wi #device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 device fe0 at isa? port 0x300 device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support #pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) pseudo-device bpf #Berkeley packet filter device pcm device sbc ##### cat /dev/sndstat ###################################################################### FreeBSD Audio Driver (newpcm) May 10 2000 15:25:10 Installed devices: pcm0: <SB DSP 4.16 (ViBRA16X)> at io 0x220 irq 5 drq 1:3 (1p/1r channels duplex) To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org with "unsubscribe de-bsd-questions" in the body of the messageReceived on Thu 11 May 2000 - 19:08:24 CEST