Nochmal Soundkarte

Hallihallo

nochmal wegen der Soundkarte:

Ich habe mal meine Bootmessage und mein
Kernel-Konfigurationsfile angehangen.
Ebenso was cat /dev/sndstat sagt.

Was mich in der Anzeige stutzig macht, ist
das das device sbxvi0 auf den Interrupt 1 gelegt wird
(automatisch)
Ich habe eine Soundblaster 16 PnP (ISA)
Eine Aenderung des devices auf
"device sbxvi0 at isa? irq 5 drq 5 conflicts" bringt
nur einen Konflikt zutage.

Kann jemand mit diesen Attachments vielleicht mehr anfangen?

ciao Jens

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #16: Sat Jul 31 11:12:33 CEST 1999
    root(at)mephisto.jfe.net:/usr/src/sys/compile/isdn-1.0
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 267274101 Hz
CPU: Pentium II (267.27-MHz 686-class CPU)
  Origin = "GenuineIntel" Id = 0x634 Stepping=4
  Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 67043328 (65472K bytes)
avail memory = 62181376 (60724K bytes)
Preloaded elf kernel "kernel" at 0xf02d8000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 15 on pci0.6.0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
bktr0: <BrookTree 878> rev 0x02 int a irq 14 on pci0.10.0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
Hauppauge WinCast/TV, Philips PAL I tuner.
isic0: <ELSA QuickStep 1000pro PCI ISDN adaptor> rev 0x01 int a irq 9 on pci0.12.0
isic0: IPAC PSB2115 Version 1.1
Probing for devices on PCI bus 1:
vga0: <ATI model 4742 graphics accelerator> rev 0x5c on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x00158a70 Comp ID: PNP0600 [0x0006d041]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model MouseMan+, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.13>
sbxvi0 at drq 5 on isa
snd0: <SoundBlaster 16 4.13>
sbmidi0 not found at 0x330
opl0 not found at 0x388
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, logging limited to 500 packets/entry
i4b: ISDN call control device attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4bctl: ISDN system control port attached
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4btrc: 4 ISDN trace device(s) attached
IP Filter: initialized. Default = pass all, Logging = enabled
Waiting 8 seconds for SCSI devices to settle
changing root device to da0s1a
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <PIONEER CD-ROM DR-U06S 1.05> Removable CD-ROM SCSI-2 device
cd0: 19.230MB/s transfers (19.230MHz, offset 16)
cd0: cd present [347905 x 2048 byte records]
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device
da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)

VoxWare Sound Driver:3.5-alpha15-970902 (Wed Aug 6 22:58:35 PDT 1997 Amancio Hasty(at)rah.star-gate.com)
Config options:

Installed drivers:
Type 1: OPL-2/OPL-3 FM
Type 2: SoundBlaster
Type 6: SoundBlaster16
Type 7: SB16 MIDI

Card config:
SoundBlaster at 0x220 irq 5 drq 1
SoundBlaster16 at 0xffffffff irq 1 drq 5
SB16 MIDI at 0x300 irq 1
OPL-2/OPL-3 FM at 0x388 irq 1

Audio devices:
0: SoundBlaster 16 4.13

Synth devices:
0: Yamaha OPL-3

Midi devices:
0: SoundBlaster 16 Midi

Timers:
0: System clock

Mixers:
0: SoundBlaster

# ISDNKERNEL
# Date: 99/05/12 20:34
#===============================================================================

machine "i386"
cpu "I686_CPU"
ident ISDNKERNEL
maxusers 64

options "MAXDSIZ=(256*1024*1024)"
options "DFLDSIZ=(256*1024*1024)"

options INET # INTERNET Working
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
#options MFS #Memory Filesystem
#options MFS_ROOT #MFS usable as root device, "MFS"
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
#options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=8000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options NSWAPDEV=1
options COMPAT_LINUX # Linux Binary compatibility
options "EXT2FS"
options LKM
options LINUX

#options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, "NFS" req'ed

# FIREWALL

options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #print information about dropped packets
options "IPFIREWALL_VERBOSE_LIMIT=500" #limit verbosity
options IPDIVERT #divert sockets
options IPFILTER #kernel ipfilter support
options IPFILTER_LOG #ipfilter logging

config kernel root on da0s4

# ISA and PCI BUS support
controller isa0
controller pci0

# Floppy
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0

# SCSI Devices
controller ahc0
controller scbus0 at ahc0
device da0 at scbus0 target 0 unit 0
device cd0 at scbus0 target 2 unit 0 #Only need one of these, the code dynamically grows

# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12

device vga0 at isa? port ? conflicts

# syscons is the default console driver, resembling an SCO console
device sc0 at isa? tty

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? tty
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor

device npx0 at isa? port IO_NPX irq 13

# Serielle Schnittstellen

device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
#device sio2 at isa? disable port "IO_COM3" tty irq 5
#device sio3 at isa? disable port "IO_COM4" tty irq 9

# Parallel port
# parallel device on mainboard
# device lpt0 at isa? port "IO_LPT1" tty irq 7

device ppc0 at isa? port? net irq 7
controller ppbus0
device nlpt0 at ppbus?

#device plip0 at ppbus?
#device ppi0 at ppbus?
#controller vpo0 at ppbus?

# PnP Support
controller pnp0
#options "USERCONFIG"
#options "USERCONFIG_BOOT"

pseudo-device loop #Network loopback device
pseudo-device ether #Generic Ethernet
pseudo-device vn 8 #Vnode driver (turns a file into a dev.)
pseudo-device bpfilter 4 #Berkeley packet filter
pseudo-device pty 16 #Pseudo ttys - can go as high as 256
pseudo-device gzip # Exec gzipped a.out's
#pseudo-device ccd 4 #Concatenated disk driver
pseudo-device tun 1 #Tunnel driver (user process ppp(8))
pseudo-device ppp 1 #Point-to-point protocol
pseudo-device sppp 1 # Synchr. PPP for ISDN
options PPP_BSDCOMP #PPP BSD-compress support
options PPP_DEFLATE #PPP zlib/deflate/gzip support
options PPP_FILTER #enable bpf filtering (needs bpfilter)

# Splash screen at start up! Screen savers require this too.
pseudo-device splash

options SYSVSHM
options SYSVMSG
options SYSVSEM

controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
device sbxvi0 at isa? irq 5 drq 5 conflicts
device sbmidi0 at isa? port 0x300
device opl0 at isa? port 0x388
pseudo-device speaker

#options EXCLUDE_SBPRO
#options SBC_IRQ=5

controller iicbus0
controller iicbb0
controller smbus0

device bktr0

# ISDN4BSD Non-Active Cards (PCI)
# ELSA QuickStep 1000pro PCI
options "ELSA_QS1PCI"
device isic0

# Pseudo-Devices for ISDN CARDS
# ++++ D-Channel Handling layer 2
pseudo-device "i4bq921"

# ++++ D-Channel Handling layer 3
pseudo-device "i4bq931"

# ++++ Common passiv Card Handling
pseudo-device "i4b"

# ++++ Userland Driver
pseudo-device "i4bisppp" 4
pseudo-device "i4btrc" 4
pseudo-device "i4bctl"
pseudo-device "i4brbch" 4
pseudo-device "i4btel" 2

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Sun 01 Aug 1999 - 10:47:06 CEST