keine Platte?

From: Matthias Teege <mtg(at)gmx.de>
Date: Wed, 16 Sep 1998 18:35:52 +0200 (MET DST)

Moin,

ich habe heute meine neue Festplatte angeschlossen und wollte gerade
eine "Dedicated Mode Disk" via /stand/sysinstall produzieren da meint
sysinstall ich hätte keine Platten (mehr). Natürlich sind aber noch
alle Platten da und sie funktionieren auch. :-)

Wenn ich mich recht entsinne wollte mein sysinstall nach dem Update
von 2.1.5 auf 2.1.7 nicht mehr laufen und ich habe das Tool seitdem
nicht mehr verwendet. Nach dem Studium von "Formatting Media ..." habe
ich es nochmal versucht und es sprang wieder an. Allerdings bin ich
in der Zwischenzeit auf FreeBSD 2.2.5-RELEASE i386.

Beim Aufruf meldet sysinstall "Error mounting /dev/cd0a on /cdrom:
Invalid argument (22)". In dem Laufwerk befindet sich keine BSD CD
aber ich kann es von Hand problemlos mounten. Wenn ich dann
Index/Partition wähle kommt die besagte Meldung "No disks found ...".

Ich hänge den Output von dmesg an. Einen Versuch via Befehlszeile habe
ich aus Rücksicht auf meine Daten (und Nerven) vorerst unterlassen und
mir wäre der Weg über /stand/sysinstall wirklich lieber. Vielleicht
hat hier jemand einen Hinweis für mich.

Vielen Dank
Matthias

PS: die neue Platte ist die DGVS und ich verwende zwei Controller

FreeBSD 2.2.5-RELEASE #0: Tue Aug 25 18:58:08 MET DST 1998
    matthias(at)moon.fgh.net:/usr/src/sys/compile/MOON225A
CPU: Pentium (149.69-MHz 586-class CPU)
  Origin = "GenuineIntel" Id = 0x52c Stepping=12
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
avail memory = 62730240 (61260K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437FX PCI cache memory controller> rev 2 on pci0:0
chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0
chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1
ncr0 <ncr 53c875 fast20 wide scsi> rev 4 int a irq 14 on pci0:10
ncr0 waiting for scsi devices to settle
(ncr0:0:0): "FUJITSU M1606S-512 6404" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): 10.0 MB/s (100 ns, offset 15)
1041MB (2131992 512 byte sectors)
(ncr0:1:0): "IBM DPES-31080 S31Q" type 0 fixed SCSI 2
sd1(ncr0:1:0): Direct-Access
sd1(ncr0:1:0): 10.0 MB/s (100 ns, offset 15)
1034MB (2118144 512 byte sectors)
(ncr0:3:0): WIDE SCSI (16 bit) enabled(ncr0:3:0): 10.0 MB/s (200 ns, offset 15)
(ncr0:3:0): "IBM DGVS09U 03B0" type 0 fixed SCSI 3
sd2(ncr0:3:0): Direct-Access
sd2(ncr0:3:0): WIDE SCSI (16 bit) enabled
sd2(ncr0:3:0): 40.0 MB/s (50 ns, offset 15)
8705MB (17829870 512 byte sectors)
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 4 int a irq 15 on pci0:11
fxp0: Ethernet address 00:a0:c9:93:13:bf
vga0 <VGA-compatible display device> rev 0 int a irq 12 on pci0:12
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 9 on isa
sio2: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 at 0x278-0x27f irq 5 on isa
lpt1: Interrupt-driven port
lp1: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0 waiting for scsi devices to settle
(aha0:0:0): "SONY CD-ROM CDU-8002 1.8g" type 5 removable SCSI 1
cd0(aha0:0:0): CD-ROM cd present [220660 x 2048 byte records]
(aha0:1:0): "WangDAT Model 3100 02.2" type 1 removable SCSI 2
st0(aha0:1:0): Sequential-Access density code 0x13, drive empty
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
Received on Wed 16 Sep 1998 - 18:36:43 CEST

search this site