© 1995-2013 by The FreeBSD Project. All rights reserved.URL: http://lists.de.freebsd.org
Hallo!
Seit neuestem habe ich Probleme, mich mit FreeBSD ins Internet einzuwählen.
Mit OS/2 klappt es einwandfrei - ich habe mal alle verfügbaren
Logging-Optionen
eingeschaltet, bin daraus aber nicht schlau geworden.
Die Gegenstelle ist uebrigens ein Livingston Portmaster. Hoffentlich kann
mir
jemand von Euch helfen...
Antworten bitte auch an diese Mailadresse (db(at)saargate.de), da meine
normale
Adresse, mit der ich auch bei der Mailingliste angemeldet bin
(domi(at)bsd.saargate.de) leider im Moment tot ist.
hier ist meine ppp.conf:
default:
# Filter
# Nameserveranfragen
set dfilter 0 deny udp dst eq 53
set dfilter 1 deny udp src eq 53
# SMTP-Mail
set dfilter 2 deny tcp dst eq 25
set dfilter 3 deny tcp src eq 25
# IRC
set dfilter 4 deny tcp src eq 6667
set dfilter 5 deny tcp dst eq 6667
# Proxy
set dfilter 6 deny tcp dst eq 3128
# ICMP
set dfilter 7 deny icmp
set dfilter 8 permit 0/0 0/0
set device /dev/cuaa1
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT&F1L0 OK-AT-OK
\\dATDWT\\T TIMEOUT 40 CONNECT"
set server 3000 abcd
alias enable yes
saargate:
enable pap
set authname xxxxxxx
set authkey xxxxxxx
set phone "0686193630"
set login "TIMEOUT 10 ogin:-BREAK-ogin: ppp word: ppp"
set timeout 40
set redial 30.30 1
set reconnect 2 1
deny lqr
set ifaddr 193.158.76.91/0 193.158.76.5/0 255.255.255.0
delete all
add 0 0 HISADDR
Wenn ich mich einwählen will, bekomme ich folgende Meldungen:
Command: Client: dial
Phase: Connected!
Chat: Expecting:
Chat: Sending: AT&F1L0^M
Chat: Expecting: OK-AT-OK
Chat: Wait for (5): OK
Connect: AT&F1L0^M^M
Connect: OK
Phase: Phone: 0686193630
Chat: Sending: ATDWT0686193630^M
Chat: Expecting: CONNECT
Chat: Wait for (40): CONNECT
Connect: ^M
Connect: ATDWT0686193630^M^M
Connect: CONNECT
Chat: Expecting: ogin:-BREAK-ogin:
Chat: Wait for (10): ogin:
Connect: 38666/ARQ/V90/LAPM/V42BIS^M
Connect: ^M
Connect: ^M
Connect: login:
Chat: Sending: ppp^M
Chat: Expecting: word:
Chat: Wait for (10): word:
Connect: ppp^M
Connect: Password:
Chat: Sending: ppp^M
LCP: State change Initial --> Closed
LCP: State change Closed --> Stopped
LCP: Received Configure Request (1) state = Stopped (3)
LCP: ACCMAP[6] 0x00000000
LCP: MAGICNUM[6] 0xfc771433
LCP: PROTOCOMP[2]
LCP: ACFCOMP[2]
LCP: LcpSendConfigReq
LCP: ACFCOMP[2]
LCP: PROTOCOMP[2]
LCP: ACCMAP[6] 0x00000000
LCP: MRU[4] 1500
LCP: MAGICNUM[6] 0x0e786543
LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
LCP: SendConfigAck(Stopped)
LCP: ACCMAP[6] 0x00000000
LCP: MAGICNUM[6] 0xfc771433
LCP: PROTOCOMP[2]
LCP: ACFCOMP[2]
LCP: State change Stopped --> Ack-Sent
LCP: Received Configure Ack (1) state = Ack-Sent (8)
LCP: State change Ack-Sent --> Opened
LCP: LcpLayerUp
Phase: NewPhase: Authenticate
Phase: his = none, mine = CHAP
LCP: ChapOutput: CHALLENGE
IPCP: Received Configure Request (1) state = Initial (0)
IPCP: Oops, RCR in Initial.
LCP: ChapOutput: CHALLENGE
IPCP: Received Configure Request (2) state = Initial (0)
IPCP: Oops, RCR in Initial.
LCP: ChapOutput: CHALLENGE
IPCP: Received Configure Request (3) state = Initial (0)
IPCP: Oops, RCR in Initial.
IPCP: Received Configure Request (4) state = Initial (0)
IPCP: Oops, RCR in Initial.
IPCP: Received Configure Request (5) state = Initial (0)
IPCP: Oops, RCR in Initial.
IPCP: Received Configure Request (6) state = Initial (0)
IPCP: Oops, RCR in Initial.
IPCP: Received Configure Request (7) state = Initial (0)
IPCP: Oops, RCR in Initial.
IPCP: Received Configure Request (8) state = Initial (0)
IPCP: Oops, RCR in Initial.
IPCP: Received Configure Request (9) state = Initial (0)
IPCP: Oops, RCR in Initial.
Phase: Client connection closed.
IPCP: Received Configure Request (10) state = Initial (0)
IPCP: Oops, RCR in Initial.
Phase: Disconnected!
LCP: LcpLayerDown
LCP: State change Opened --> Starting
LCP: LcpLayerFinish
Phase: Modem: Connect time: 59 secs: 535 octets in, 276 octets out
Phase: total 13 bytes/sec
Phase: NewPhase: Dead
Viele Gruesse
Dominik
Received on Wed 16 Sep 1998 - 14:34:39 CEST