On 28-Aug-98 Axel Stegner wrote:
> Hi,
> 
> mal wieder 'ne Soundkartenfrage :-)
> Nachdem ich den letzten Thread gelesen habe laeuft jetzt Luigi's Treiber,
> aber wo kommt das audio1 - Device her ? MAKEDEV hat es mit
> unterschiedlichsten
> Optionen nicht erzeugt.
> 
> Danke,
>       Axel
> 
> Aus meinem dmesg:
>  Probing for PnP devices:
>  CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x10107969
>  This is a SB16 PnP, but LDN 0 is disabled
> 
> pnpinfo sagt:
>  Checking for Plug-n-Play devices...
> 
>  Card assigned CSN #1
>  Vendor ID CTL0028 (0x28008c0e), Serial Number 0x10107969
>  PnP Version 1.0, Vendor Version 16
>  Device Description: Creative SB16 PnP
> 
>  Logical Device ID: CTL0031 0x31008c0e #0
>  Device Description: Audio
>  TAG Start DF
>  Good Configuration
>     IRQ: 5  - only one type (true/edge)
>     DMA: channel(s) 1 
>  [...]
> 
> Luigi schreibt:
> Common mistakes:
> 
> * you are trying to use /dev/audio0 instead of /dev/audio1
>   For technical reasons, a PnP device is attached as unit 1 instead
>   of unit 0 -- most applications are programmed to access the audio
>   hardware through /dev/audio, /dev/dsp, /dev/mixer which are in turn
>   symlinks to the correct device entries. Check them and possibly fix
>   these symlinks in /dev
----------------------------------
E-Mail: Werner Griessl <werner(at)btp1da.phy.uni-bayreuth.de>
Date: 28-Aug-98
Time: 16:00:12
This message was sent by XFMail
----------------------------------
Probier mal:
cd /dev
rm audio
ln -s audio1 audio
und wahrscheinlich noch diese:
audio -> audio1
dsp -> dsp1
dspW -> dspW1
mixer -> mixer1
music -> music1
pss -> pss1
sequencer -> sequencer1
Werner
Received on Fri 28 Aug 1998 - 16:06:09 CEST