ZFS raidz1 von 8.2-Stable nach 9.0

From: Harald Neuffer <neuf(at)burgberg.org>
Date: Sat, 13 Oct 2012 12:47:49 +0200

Hallo,

ich versuche ein ZFS raidz1 von einem 8.2-RELEASE-p2 System an ein
9.0-RELEASE-p4 System zu hängen. Leider wird zwar ada0,ada2 und ada3
erkannt, aber der Pool tera6 ist nicht da.

8.2-RELEASE# zpool status
   pool: tera6
  state: ONLINE
  scrub: none requested
config:

         NAME STATE READ WRITE CKSUM
         tera6 ONLINE 0 0 0
           raidz1 ONLINE 0 0 0
             ada3 ONLINE 0 0 0
             ada2 ONLINE 0 0 0
             ada0 ONLINE 0 0 0

errors: No known data errors

8.2-RELEASE#fdisk ada0
******* Working on device /dev/ada0 *******
parameters extracted from in-core disklabel are:
cylinders=5814021 heads=16 sectors/track=63 (1008 blks/cyl)

Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=5814021 heads=16 sectors/track=63 (1008 blks/cyl)

fdisk: invalid fdisk partition table found
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
     start 63, size 1565565057 (764436 Meg), flag 80 (active)
         beg: cyl 0/ head 1/ sector 1;
         end: cyl 755/ head 15/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>

Die Platten sind nicht mit GPT initialisiert worden, sondern gleich mit
ZFS. Ein anderer Pool auf dem neuem System ist sichtbar, es wurde dort
auch erstellt.

Gibt es eine Möglichkeit, den raidz1 Pool auf dem neuem System erkennen
zu lassen?

Gruß Harald

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Sat 13 Oct 2012 - 12:48:00 CEST

search this site