Re: Hardwarefehler ?

hallo,

vielen Dank soweit - nach zwei weiteren Systemabstürzen bin ich leider immer noch nicht weiter.
ich tippe auf einen mir unbekannten Hardwarefehler, weil ich keine anderen Hinweise finde.

memtest ist OK
debug.acpi.max_tasks="64" ist erledigt

crashinfo_enable="YES" ist aktiviert, /var/crash ist aber leer nach den Abstürzen

das Update auf 8-stable (RELENG_8) habe ich noch nicht machen können, dito Bios Update:
FreeBSD 8.0-RELEASE-p2 #0: Tue Jan 5 21:11:58 UTC 2010 root(at)amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC

auf der Kiste läuft "nur" ein munin-main und die Uptimes liegen bei 3 bis 7 Tagen.
Die Abstürze geschehen mit und ohne aktivierter Firewall (PF)

Am 12.02.2010 um 19:09 schrieb Oliver Fromme:

> Ein paar Infos zu den "Abstürzen" wären noch ganz hilfreich.
> Meistens gibt es einen von den folgenden Fällen:
>
> 1. Kernel-Panic.
> 2. Rechner friert ein bzw. stellt sich tot.
> 2.1. Interrupts gehen noch (ping, Caps-Lock-LED, KDB

m.E. ist das der Fall:
pings gehen noch, ssh bis zum Passwort Dialog...
ich kann den Rechner nur noch per ipmi-tool remote neustarten.

> 2.2. Nix geht mehr (naja, FW-Debugging geht fast immer)
> 3. Spontaner Reboot.
> (Kann auch der Reboot nach einer unerkannten Panic sein,
> die man nicht gesehen hat, weil gerade X läuft.)

Gruss, Henning

ps: das akt. /var/run/dmesg.boot

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE-p2 #0: Tue Jan 5 21:11:58 UTC 2010
   root(at)amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz (2266.65-MHz K8-class CPU)
 Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5
 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
 AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
 AMD Features2=0x1<LAHF>
 TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8160956416 (7782 MB)
ACPI APIC Table: <INTEL S5520WBV>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
cpu8 (AP): APIC ID: 16
cpu9 (AP): APIC ID: 17
cpu10 (AP): APIC ID: 18
cpu11 (AP): APIC ID: 19
cpu12 (AP): APIC ID: 20
cpu13 (AP): APIC ID: 21
cpu14 (AP): APIC ID: 22
cpu15 (AP): APIC ID: 23
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5520WBV> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x1020-0x103f mem 0xb1c20000-0xb1c3ffff,0xb1cc4000-0xb1cc7fff irq 28 at device 0.0 on pci1
igb0: Using MSIX interrupts with 3 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:15:17:9e:15:08
igb1: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x1000-0x101f mem 0xb1c00000-0xb1c1ffff,0xb1cc0000-0xb1cc3fff irq 40 at device 0.1 on pci1
igb1: Using MSIX interrupts with 3 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:15:17:9e:15:09
pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pci5: <ACPI PCI bus> on pcib3
aac0: <Adaptec RAID 2405> mem 0xb1a00000-0xb1bfffff irq 30 at device 0.0 on pci5
aac0: Enabling 64-bit address support
aac0: Enable Raw I/O
aac0: Enable 64-bit array
aac0: New comm. interface enabled
aac0: [ITHREAD]
aac0: Adaptec 2405, aac driver 2.0.0-1
aacp0: <SCSI Passthrough Bus> on aac0
aacp1: <SCSI Passthrough Bus> on aac0
aacp2: <SCSI Passthrough Bus> on aac0
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 33 at device 10.0 on pci0
pci7: <ACPI PCI bus> on pcib5
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x20c0-0x20df irq 19 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x103f
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0x20a0-0x20bf irq 19 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x003f
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0x2080-0x209f irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x003f
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb1d21000-0xb1d213ff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci9: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> mem 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 at device 0.0 on pci9
uhci3: <UHCI (generic) USB controller> port 0x2060-0x207f irq 16 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x003f
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0x2040-0x205f irq 16 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x003f
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0x2020-0x203f irq 16 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x003f
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xb1d20000-0xb1d203ff irq 16 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x2138-0x213f,0x214c-0x214f,0x2130-0x2137,0x2148-0x214b,0x2110-0x211f,0x2100-0x210f irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port 0x2128-0x212f,0x2144-0x2147,0x2120-0x2127,0x2140-0x2143,0x20f0-0x20ff,0x20e0-0x20ef irq 21 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
cpu8: <ACPI CPU> on acpi0
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
cpu9: <ACPI CPU> on acpi0
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
cpu10: <ACPI CPU> on acpi0
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
cpu11: <ACPI CPU> on acpi0
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
cpu12: <ACPI CPU> on acpi0
est12: <Enhanced SpeedStep Frequency Control> on cpu12
p4tcc12: <CPU Frequency Thermal Control> on cpu12
cpu13: <ACPI CPU> on acpi0
est13: <Enhanced SpeedStep Frequency Control> on cpu13
p4tcc13: <CPU Frequency Thermal Control> on cpu13
cpu14: <ACPI CPU> on acpi0
est14: <Enhanced SpeedStep Frequency Control> on cpu14
p4tcc14: <CPU Frequency Thermal Control> on cpu14
cpu15: <ACPI CPU> on acpi0
est15: <Enhanced SpeedStep Frequency Control> on cpu15
p4tcc15: <CPU Frequency Thermal Control> on cpu15
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xce7ff on isa0
atkbd: unable to set the command byte.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to set the command byte.
ppc0: cannot reserve I/O port range
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
acd0: DVDR <TSSTcorp CDDVDW SN-S083C/SB00> at ata2-master SATA150
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 285686MB (585084928 sectors)
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic16: Forcing LINT1 to edge trigger
SMP: AP CPU #8 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic21: Forcing LINT1 to edge trigger
SMP: AP CPU #13 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic22: Forcing LINT1 to edge trigger
SMP: AP CPU #14 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic18: Forcing LINT1 to edge trigger
SMP: AP CPU #10 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic23: Forcing LINT1 to edge trigger
SMP: AP CPU #15 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic19: Forcing LINT1 to edge trigger
SMP: AP CPU #11 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic17: Forcing LINT1 to edge trigger
SMP: AP CPU #9 Launched!
lapic20: Forcing LINT1 to edge trigger
SMP: AP CPU #12 Launched!
Root mount waiting for: usbus3
Trying to mount root from ufs:/dev/aacd0s1a
ugen2.2: <American Megatrends Inc.> at usbus2
ukbd0: <Keyboard Interface> on usbus2
kbd2 at ukbd0
ums0: <Mouse Interface> on usbus2
ums0: 3 buttons and [Z] coordinates ID=0

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Mon 22 Feb 2010 - 12:01:15 CET