Re: smartmontools

From: Benjamin Thelen <bt(at)ccgis.de>
Date: Fri, 08 Jul 2005 14:45:41 +0200

Marcus Franke wrote:
> Hi,
>
> ich habe gerade mal auf meiner Maschine die smartmontools installiert
> und das Ergebnis ist irgendwie erschreckend? Ich bin nicht ganz sicher
> was die einzelnen Werte bedeuten wollen..
>
> SMART Attributes Data Structure revision number: 10
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 061 060 006 Pre-fail Always
> - 190055215
> 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always
> - 0
> 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always
> - 0
> 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
> - 0
> 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always
> - 92066423
> 9 Power_On_Hours 0x0032 098 098 000 Old_age Always
> - 1847
> 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
> - 0
> 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always
> - 93
> 194 Temperature_Celsius 0x0022 039 050 000 Old_age Always
> - 39
> 195 Hardware_ECC_Recovered 0x001a 061 060 000 Old_age Always
> - 190055215
> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
> - 0
> 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
> - 0
> 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
> Offline - 0
> 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always
> - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> Num Test_Description Status Remaining
> LifeTime(hours) LBA_of_first_error
> # 1 Short offline Completed without error 00% 1847
> -
>
>
> Soll die erste Zeile wirklich bedeuten, dass meine lokale Platte (ad0)
> 190 Millionen Fehler hatte? Ich hatte das auf einer Linux Maschine
> da war der Zähler auf scheinbar max 2^16 limitiert.
>
> Sollte ich mir jetzt also vor Angst in die Hose machen oder ist der
> Wert einfach nicht richtig, weil ich was falsch gemacht habe?
>
>
> Marcus
>
>
> To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
> with "unsubscribe de-bsd-questions" in the body of the message

Moin,

in der c't 23/04, Seite 236 war ein ausführlicherer Bericht über die
smartmontools.

Ich würde mir aber eher nicht in die Hosen machen, am Schluß steht doch
"Completed without error".
Besorg Dir sowas wie den Drive Fitness Test von IBM/Hitachi, halt
passend zu Deiner Platte bzw. auf einer der letzten Heft-CDs war auch
eine ganz Sammlung von Diagnose-Tools und check die Platte damit.

Das Problem mit den smartmontools ist, dass die Ergebnisse nicht ganz so
einfach zu interpretieren sind, weil die Werte Herstellerseitig immer
bisschen anders angegeben werden.

Gruß,
Benjamin

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Fri 08 Jul 2005 - 14:45:02 CEST

search this site