Am So, den 25.04.2004 schrieb Sascha Klauder um 23:45:
> On Sun, Apr 25, 2004 at 04:29:18PM +0200, Marc Santhoff wrote:
> > drm0: <Matrox G400/G450 (AGP)> mem 0xe7000000-0xe77fffff,0xe6000000-0xe6003fff,0xe4000000-0xe5ffffff irq 15 at device 0.0 on pci2
> > error: [drm:mga_init] *ERROR* Cannot initialize the agpgart module.
> >
> > Da scheint dann wohl der Fehler zu liegen. Warum passiert das?
>
> Gute Frage. Wird denn Deine AGP-Bridge ordnungsgemäß erkannt?
>
> Bitte poste doch mal den relevanten Kernel-Output; da sollte
Ich dachte, das hätte ich ... s.u.
> ein Device agp0 auftauchen. Wenn Du da Fehlermeldungen hast,
> auch gleich mal mit -v booten.
Nein, gibt es nicht.
Hier mal zusammengeschnipselt (hoffentlich) alles relevante an
Geräteinfo:
<aus dmesg>
...
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
...
pcib2: <PCI to PCI bridge (vendor=10de device=01e8)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
drm0: <Matrox G400/G450 (AGP)> mem 0xe7000000-0xe77fffff,0xe6000000-0xe6003fff,0xe4000000-0xe5ffffff irq 15 at device 0.0 on pci2
error: [drm:mga_init] *ERROR* Cannot initialize the agpgart module.
device_probe_and_attach: drm0 attach returned 12
...
module_register: module pci/mga already exists!
linker_file_sysinit "mga.ko" failed to register! 17
</aus dmesg>
Huch, in /boot/loader.conf ist das modul auskommentiert ...
<pciconf -lv>
chip0(at)pci0:0:0: class=0x060000 card=0x00000000 chip=0x01e010de rev=0xa2
hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce2 AGP Controller'
class = bridge
subclass = HOST-PCI
...
pcib2(at)pci0:30:0: class=0x060400 card=0x00000000 chip=0x01e810de
rev=0xa2 hdr=0x01
vendor = 'NVIDIA Corporation'
device = 'nForce2 AGP Host to PCI Bridge'
class = bridge
subclass = PCI-PCI
...
none9(at)pci2:0:0: class=0x030000 card=0x2159102b chip=0x0525102b rev=0x05
hdr=0x00
vendor = 'Matrox Graphics Inc'
device = 'MGA-G400/450 Chipset'
class = display
subclass = VGA
</pciconf -lv>
Ich glaube das doofe nVidia2-Brett fliegt doch bald in in den
Eimer^H^H^H^Hbay.
Gruß,
Marc
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Mon 26 Apr 2004 - 02:06:56 CEST