Re: Serielle multiportkarte - mit FreeBSD?

On Mon, Sep 08, 2003 at 06:17:12PM +0200, Olaf Hoyer wrote:
> On Mon, 8 Sep 2003, Oskar Eyb wrote:
> >
> > (Test-System ist 5.1-CURRENT, im BIOS die COM-Ports disabled)
> >
> > Wird diese Karte überhaupt unterstützt? Nach dem Lesen von sio(4) und
> > hardware-i386.html befürchte ich das nicht.

Wenn es eine PCI Karte ist, dann wirst du den puc Treiber in Betracht
ziehen wollen.
Was du gezeigt hast waren die normalen ISA Seriele, die jeder PCI
heutzutage onboard hat - und selbst bei denen gab es IRQ Probleme.
Exoten wird man auf deren I/O Daten kaum finden.

> > Anderenfalls - wie heissen unterstützte, günstige ISA / PCI multiportkarten
> > mit mindestens 4 Ports?
>
> Moin!
>
>
> Unterstuetzt heisst prinzipiell cyclades.

Quatsch - bis 8 Ports laufen auch diverse PCI NoName.
Von den weit verbreiteten AST kompatiblen ISA Karten mal abgesehen,
welche man inzwischen allerdings immer seltener finded.
Außerdem gibt es heutzutage noch viel mehr:
[52]cicely6# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), OPTi(0x0000), rev 1.00
 port 1 addr 2: full speed, self powered, config 1, Standard USB Hub(0x3301), Atmel(0x03eb), rev 3.00
  port 1 addr 3: full speed, self powered, config 1, General Purpose USB Hub(0x2077), Texas Instruments(0x0451), rev 1.00
   port 1 addr 4: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 2 addr 5: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 3 addr 6: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 4 addr 7: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 5 addr 8: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 6 addr 9: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 7 powered
  port 2 addr 10: full speed, self powered, config 1, General Purpose USB Hub(0x2077), Texas Instruments(0x0451), rev 1.00
   port 1 addr 11: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 2 addr 12: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 3 addr 13: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 4 addr 14: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 5 addr 15: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 6 addr 16: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 7 powered
  port 3 addr 17: full speed, self powered, config 1, General Purpose USB Hub(0x2077), Texas Instruments(0x0451), rev 1.00
   port 1 addr 18: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 2 addr 19: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 3 addr 20: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 4 addr 21: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 5 addr 22: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 6 addr 23: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 7 powered
  port 4 addr 24: full speed, self powered, config 1, General Purpose USB Hub(0x2077), Texas Instruments(0x0451), rev 1.00
   port 1 addr 25: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 2 addr 26: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 3 addr 27: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 4 addr 28: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 5 addr 29: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 6 addr 30: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 7 powered
 port 2 powered

-- 
B.Walter                   BWCT                http://www.bwct.de
ticso(at)bwct.de                                  info(at)bwct.de
To Unsubscribe: send mail to majordomo.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message