Compaq evo n610c und apm /ACPI

Moin!

Habe gerade mein Dienstnotebook mit dem leidigen Thema apm etc. am
wickel.

Primaeres Problem: Ich moechte u.a. den Akkustatus auslesen, welches ja
normalerweise ueber apm erfolgt. (FreeBSD 4.8)

Aber:
pris 12:32 >apm -a
apm: can't open /dev/apm: Device not configured

ein cd /dev && sh MAKEDEV apm brachte da genau gar nix.

Anscheinend hat Compaq da einige Eigenwilligkeiten drin, Kollege hat
das gleiche Teil unter 5.1R, da musste ACPI abgeschaltet werden...

Interessanterweise funktioniert dieses unter Knoppix 3.2 mit Kernel
2.4.21-xfs

Irgendwelche Vorschlaege, oder aehnliche Erfahrungen?

Olaf

pris 12:36 >uname -a
FreeBSD pris. 4.8-STABLE FreeBSD 4.8-STABLE #0: Mon Aug 4
12:38:51 CEST 2003 root(at)pris:/usr/src/sys/compile/SMBUS
i386

pris 12:41 >dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 4.8-STABLE #0: Mon Aug 4 12:38:51 CEST 2003
    root(at)pris.ka.strato.de:/usr/src/sys/compile/SMBUS
Timecounter "i8254" frequency 1193182 Hz
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz (1993.54-MHz 686-class
CPU)
  Origin = "GenuineIntel" Id = 0xf27 Stepping = 7

Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536674304 (524096K bytes)
avail memory = 518443008 (506292K bytes)
Preloaded elf kernel "kernel" at 0xc03ac000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0x60000000-0x6fffffff at
device 0.0 on pci0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon LW Mobility 7500 M7> port 0x3000-0x30ff mem
0x40400000-0x4040ffff,0x48000000-0x4fffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0x60000000 256MB
info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on
pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x11c1, dev=0x0450) at 4.0 irq 11
pcic0: <TI PCI-1420 PCI-CardBus Bridge> mem 0x40000000-0x40000fff irq 11
at device 6.0 on pci2
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa
irq]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr: can't route an interrupt to 2:6 INTA
pcic1: <TI PCI-1420 PCI-CardBus Bridge> mem 0x40080000-0x40080fff at
device 6.1 on pci2
pci_cfgintr: can't route an interrupt to 2:6 INTA
pcic1: No PCI interrupt routed, trying ISA.
pcic1: Polling mode
pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa
irq]
pccard1: <PC Card 16-bit bus (classic)> on pcic1
fxp0: <Intel 82801CAM (ICH3) Pro/100 VM Ethernet> port 0x2400-0x243f mem
0x40100000-0x40100fff irq 10 at device 8.0 on pci2
fxp0: Ethernet address 00:08:02:95:ae:66
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0: <NEC uPD 9210 USB controller> mem 0x40180000-0x40180fff irq 10 at
device 14.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0x40200000-0x40200fff irq 10 at
device 14.1 on pci2
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci2: <USB controller> at 14.2 irq 10
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x4440-0x444f,0-0x3,0-0x7,0-0x3,0-0x7 irq 11 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel 82801CA (ICH3)> port 0x4400-0x443f,0x4000-0x40ff irq 11 at
device 31.5 on pci0
pcm0: <unknown ac97 codec> (id=0x41445363)
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: parallel port not found.
ad0: 38154MB <IC25N040ATCS05-0> [77520/16/63] at ata0-master UDMA100
acd0: CD-RW <DW-224E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
fxp0: promiscuous mode enabled

-- 
Olaf Hoyer        ohoyer(at)gaff.hhhr.ision.net
Fuerchterliche Erlebniss geben zu raten,
ob der, welcher sie erlebt, nicht etwas Fuerchterliches ist.
(Nietzsche, Jenseits von Gut und Boese)
To Unsubscribe: send mail to majordomo.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message