Re: Ipfw und keep-state

On Fri, Jun 27, 2003 at 07:00:49PM +0200, Marcus Franke wrote:
>
> >> Dann bin ich in den Keller, habe mich direkt am Server angemeldet
> >> und die Regeln neu eingelesen. Da an dem Ding kein Monitor dran
> >> ist, sondern nur ne Tastatur (für den Notfall), hatte ich für
> >> diesen Zweck vorsorglich einen Alias angelegt:
> >
> >seriele console!!!
> >:)
>
> Wo könnte man so ein Terminal günstig herbekommen?

Spontan würde ich sagen Ebay.
Aber dann kann man auch gleich einen Monitor und Tastatur anklemmen.
Für mich ist der Vorteil von serilen Consolen, daß ich auch remote
draufkomme.

Habe dazu einen Satz RS232 an einem Rechner dran:
[52]cicely6# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), OPTi(0x0000), rev 1.00
 port 1 addr 2: full speed, self powered, config 1, Standard USB Hub(0x3301), Atmel(0x03eb), rev 3.00
  port 1 addr 3: full speed, self powered, config 1, General Purpose USB Hub(0x2077), Texas Instruments(0x0451), rev 1.00
   port 1 addr 4: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 2 addr 5: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 3 addr 6: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 4 addr 7: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 5 addr 8: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 6 addr 9: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 7 powered
  port 2 addr 10: full speed, self powered, config 1, General Purpose USB Hub(0x2077), Texas Instruments(0x0451), rev 1.00
   port 1 addr 11: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 2 addr 12: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 3 addr 13: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 4 addr 14: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 5 addr 15: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 6 addr 16: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 7 powered
  port 3 addr 17: full speed, self powered, config 1, General Purpose USB Hub(0x2077), Texas Instruments(0x0451), rev 1.00
   port 1 addr 18: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 2 addr 19: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 3 addr 20: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 4 addr 21: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 5 addr 22: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 6 addr 23: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 7 powered
  port 4 addr 24: full speed, self powered, config 1, General Purpose USB Hub(0x2077), Texas Instruments(0x0451), rev 1.00
   port 1 addr 25: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 2 addr 26: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 3 addr 27: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 4 addr 28: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 5 addr 29: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 6 addr 30: full speed, self powered, config 1, Serial Interface(0x6001), BWCT(0x0403), rev 2.00
   port 7 powered
 port 2 powered

Habe halt keinen Bock darauf immer in den Keller zu rennen, wenn man
mal an einer Kiste was macht.
Bei diversen debugging Sessions auf Testrechnern würde ich sonst
wohl auch dauernd dort sein.
So ein Maschinenraum ist halt weniger für Menschen gebaut.

-- 
B.Walter                   BWCT                http://www.bwct.de
ticso(at)bwct.de                                  info(at)bwct.de
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message