Re: Scanner Epson Perfection 1260 (Was: OT: Empfehlung für ein Grafikprogramm)

On Sun, Jun 15, 2003 at 08:18:14PM +0200, Stefan Jahn wrote:
> Tja, das macht das Programm "scanimage -L" leider nicht. Es startet
> zwar, aber das war es auch schon. Keine Ausgabe, kein Panic, gar nichts.
> Ich kann das Programm nicht mal mehr per kill abschießen.

ps -axl ?

> Meine Ausgabe von dmesg:
>
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <SiS 5571 USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 2
> ohci1: <SiS 5571 USB controller> mem 0xec110000-0xec110fff irq 11 at
> device 3.1 on pci0
> usb1: OHCI version 1.0, legacy support
> usb1: SMM does not respond, resetting
> usb1: <SiS 5571 USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ohci2: <SiS 5571 USB controller> mem 0xec111000-0xec111fff irq 9 at
> device 3.2 on pci0
> usb2: OHCI version 1.0, legacy support
> usb2: SMM does not respond, resetting
> usb2: <SiS 5571 USB controller> on ohci2
> usb2: USB revision 1.0
> uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
>
> Ausgabe von usbdevs -v:
>
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> SiS(0x0000), rev 1.00
> port 1 addr 2: full speed, self powered, config 1, EPSON
> Scanner(0x011d), EPSON(0x04b8), rev 1.00
> port 2 powered
> Controller /dev/usb1:
> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> SiS(0x0000), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> SiS(0x0000), rev 1.00
> port 1 powered
> port 2 powered

Sieht soweit ja erst mal gut aus.

-- 
B.Walter                   BWCT                http://www.bwct.de
ticso(at)bwct.de                                  info(at)bwct.de
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message