Re: CompactFlash und kein Ende. Alternative gesucht.

Hi Bernd,

Bernd Walter wrote:

> Kann jemand anders mit einem Multireader das testen?
> Der Patch »sollte« auch auf einer aktuellen -stable passen, aber ich
> habe es nicht getestet.

Also, habe das ganze jetzt mal unter 4.8-PRE getestet und nach einigen
haendischem uebernehmen des patches scheint das ganze auch soweit zu
laufen. (ich haenge den 4er patch mal mit ran)

da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ICSI IC1100 CF 2.5b> Removable Direct Access SCSI-0 device
da0: 650KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <ICSI IC1100 MS 2.5b> Removable Direct Access SCSI-0 device
da1: 650KB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <ICSI IC1100 MMC/SD 2.5b> Removable Direct Access SCSI-0 device
da2: 650KB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <ICSI IC1100 SM 2.5b> Removable Direct Access SCSI-0 device
da3: 650KB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
olivleh1(at)kartoffel olivleh1> su
Password:
root(at)kartoffel olivleh1> camcontrol devlist
<ICSI IC1100 CF 2.5b> at scbus0 target 0 lun 0 (pass0,da0)
<ICSI IC1100 MS 2.5b> at scbus0 target 0 lun 1 (pass1,da1)
<ICSI IC1100 MMC/SD 2.5b> at scbus0 target 0 lun 2 (pass2,da2)
<ICSI IC1100 SM 2.5b> at scbus0 target 0 lun 3 (pass3,da3)
<E-IDE CD -956E/AKV A95> at scbus3 target 1 lun 0 (pass4,cd0)

Die Erkennung beim booten ging schnell, habe aber leider keinerlei Medien
um jetzt zu testen in wie weit ich auf diese zugreifen kann. Aber
zumindest blinkt die "read led" wenn ich n mount auf eines der device
versuche ;)

(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present

(war natuerlich nirgends eins drinne)

root(at)kartoffel src> usbdevs -dv
Controller /dev/usb0:
addr 1: self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev
1.00
  uhub0
 port 1 addr 2: power 100 mA, config 1, IC1100 V2.5b(0x0001),
ICSI(0x0dda), rev 2.5b
   umass0
 port 2 addr 3: power 500 mA, config 1, OV511+ Camera(0xa511),
OmniVision(0x05a9), rev 1.00
   ugen0
root(at)kartoffel src>

  Gruesse,Oliver

-- 
 Oliver Lehmann
        @home: lehmann(at)ans-netz.de
      @office: oliver.lehmann(at)mgi.de
         @www: http://www.pofo.de/  |  http://wishlist.ans-netz.de/

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message