Re: Motorola v.66 an USB mit FreeBSD

On Di 9 Jul (15:57:25), Bernd Walter <ticso(at)cicely5.cicely.de> wrote:

Hi,

> Da steht kein brauchbarer Hinweis über den Grund drin.
> Kannst du mal einen boot -v machen?
> Man muss dazu sagen, das der umodem Support recht frisch von NetBSD
> portiert wurde und womöglich noch einzelne Macken haben könnte.

Ok, ich hab jetzt mal einen boot -v gemacht, aber wesentlich mehr
kann ich da auch nicht erkennen :-/ Also hier ist mal mein
dmesg-output ... a bisserl lang ...

etup
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 5
done
Uptime: 1h0m13s
Rebooting...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE-p1 #13: Tue Jul 9 15:11:36 CEST 2002
    mh(at)mobile.bsd.net:/usr/obj/usr/src/sys/FREEBSD
Calibrating clock(s) ... TSC clock: 1293097550 Hz, i8254 clock: 1193126 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (1293.17-MHz 686-class CPU)
  Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 234881024 (229376K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00420000 - 0x0deeffff, 229441536 bytes (56016 pages)
0x0df00000 - 0x0dff5fff, 1007616 bytes (246 pages)
avail memory = 224112640 (218860K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f7280
bios32: Entry = 0xfd6f0 (c00fd6f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x11e
pnpbios: Found PnP BIOS data at 0xc00f72e0
pnpbios: Entry = f0000:98a9 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f72b0
Preloaded elf kernel "kernel" at 0xc03f9000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03f90a8.
Preloaded elf module "ltmdm.ko" at 0xc03f90f8.
VESA: information block
56 45 53 41 00 02 4a 81 00 c0 01 00 00 00 22 00
00 01 ef 01 00 01 2e 7a 00 c0 3f 7a 00 c0 47 7a
00 c0 00 01 01 01 02 01 03 01 05 01 07 01 0e 01
0f 01 11 01 12 01 14 01 15 01 17 01 18 01 1a 01
VESA: 40 mode(s) found
VESA: v2.0, 31680k memory, flags:0x1, mode table:0xc0305542 (1000022)
VESA: S3 Incorporated. Twister BIOS
VESA: S3 Incorporated. VBE 2.0 Rev 1.1
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06051106)
Using $PIR table, 8 entries at 0xc00fdf40
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1106, dev=0x0605, revid=0x00
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0 secondarybus=0
        map[10]: type 1, range 32, base ec000000, size 26
found-> vendor=0x1106, dev=0x8605, revid=0x00
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1 secondarybus=1
found-> vendor=0x1217, dev=0x6933, revid=0x01
        class=06-07-00, hdrtype=0x02, mfdev=1
        subordinatebus=0 secondarybus=0
        intpin=a, irq=0
found-> vendor=0x1217, dev=0x6933, revid=0x01
        class=06-07-00, hdrtype=0x02, mfdev=1
        subordinatebus=0 secondarybus=0
        intpin=b, irq=0
found-> vendor=0x1106, dev=0x0686, revid=0x42
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x0571, revid=0x06
        class=01-01-8a, hdrtype=0x00, mfdev=0
        subordinatebus=0 secondarybus=0
        map[20]: type 1, range 32, base 00001c20, size 4
found-> vendor=0x1106, dev=0x3038, revid=0x1a
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0 secondarybus=0
        intpin=d, irq=11
        map[20]: type 1, range 32, base 00001c00, size 5
found-> vendor=0x1106, dev=0x3057, revid=0x40
        class=06-01-00, hdrtype=0x00, mfdev=0
        subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x3058, revid=0x50
        class=04-01-00, hdrtype=0x00, mfdev=0
        subordinatebus=0 secondarybus=0
        intpin=c, irq=5
        map[10]: type 1, range 32, base 00001000, size 8
        map[14]: type 1, range 32, base 00001c34, size 2
        map[18]: type 1, range 32, base 00001c30, size 2
found-> vendor=0x104c, dev=0x8023, revid=0x00
        class=0c-00-10, hdrtype=0x00, mfdev=0
        subordinatebus=0 secondarybus=0
        intpin=a, irq=5
        map[10]: type 1, range 32, base e8004000, size 11
        map[14]: type 1, range 32, base e8000000, size 14
found-> vendor=0x11c1, dev=0x0450, revid=0x02
        class=07-80-00, hdrtype=0x00, mfdev=0
        subordinatebus=0 secondarybus=0
        intpin=a, irq=11
        map[10]: type 1, range 32, base e8004800, size 8
        map[14]: type 3, range 32, base 00001c38, size 3
        map[18]: type 1, range 32, base 00001400, size 8
found-> vendor=0x1113, dev=0x1216, revid=0x11
        class=02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0 secondarybus=0
        intpin=a, irq=11
        map[10]: type 1, range 32, base 00001800, size 8
        map[14]: type 1, range 32, base e8004c00, size 10
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=8605)> at device 1.0 on pci0
found-> vendor=0x5333, dev=0x8d01, revid=0x02
        class=03-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0 secondarybus=0
        intpin=a, irq=10
        map[10]: type 1, range 32, base e8100000, size 19
        map[14]: type 1, range 32, base f0000000, size 27
pci1: <PCI bus> on pcib1
pci1: <S3 model 8d01 graphics accelerator> (vendor=0x5333, dev=0x8d01) at 0.0 irq 10
chip1: <PCI to CardBus bridge (vendor=1217 device=6933)> irq 0 at device 4.0 on pci0
chip2: <PCI to CardBus bridge (vendor=1217 device=6933)> irq 0 at device 4.1 on pci0
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x1c20-0x1c2f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1c20
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1c28
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1c00-0x1c1f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umodem0: Motorola Inc. Motorola Phone (V.series 66), rev 1.10/0.01, addr 2, iclass 2/2
umodem0: data interface 1, has CM over data, has no break
device_probe_and_attach: umodem0 attach returned 6
ugen0: Motorola v.66 Cellular Phone, rev 1.10/0.01, addr 2
ugen0: setting configuration index 0 failed
device_probe_and_attach: ugen0 attach returned 6
viapropm0: SMBus I/O base at 0x8100
viapropm0: <VIA VT82C686A Power Management Unit> port 0x8100-0x810f at device 7.4 on pci0
viapropm0: SMBus revision code 0x40
smb0: <SMBus general purpose I/O> on smbus0
pcm0: <VIA VT82C686A> port 0x1c30-0x1c33,0x1c34-0x1c37,0x1000-0x10ff irq 5 at device 7.5 on pci0
pcm0: ac97 codec id 0x43525934 (Cirrus Logic CS4299D)
pcm0: ac97 codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement
pcm0: ac97 primary codec extended features variable rate PCM, AMAP
pcm0: sndbuf_setmap d90b000, 1000; 0xc1b37000 -> d90b000
pcm0: sndbuf_setmap d90d000, 1000; 0xc1b39000 -> d90d000
pci0: <unknown card> (vendor=0x104c, dev=0x8023) at 13.0 irq 5
ltmdm0: <Lucent Winmodem> port 0x1400-0x14ff,0x1c38-0x1c3f mem 0xe8004800-0xe80048ff irq 11 at device 16.0 on pci0
        using shared irq11.
ltmdm0: type Virtual 16550A
dc0: <Accton EN2242 MiniPCI 10/100BaseTX> port 0x1800-0x18ff mem 0xe8004c00-0xe8004fff irq 11 at device 17.0 on pci0
dc0: Ethernet address: 00:90:96:29:b5:7d
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000749, model 0x0001, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcdfff,0xe4000-0xe7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 30 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 30 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: ppp0 attached
new masks: bio 68c840, tty 6318b2, net 6718b2
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
bpf: lo0 attached
ad0: success setting UDMA5 on VIA chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <IC25N020ATCS04-0/CA2OA71A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting UDMA2 on VIA chip
acd0: <TOSHIBA DVD-ROM SD-C2502/1011> DVD-ROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, UDMA33
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 80mm audio disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 39070079, size 39070017 : OK
start_init: trying /sbin/init
Linux ELF exec handler installed

Danke,

        /mh

-- 
Martin Hasenbein  --  mh@bsd.net  --  http://bsd.net
 UNIX, a way of life. FreeBSD, my choice of living.
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message