Hallo,
ich habe folgendes Problem vom Umstieg von Linux auf Freebsd. Vielleicht hat
ja jemand seine Konfigurationsdateien da und wuerde sie mir zur Verfuegung
stellen oder kennt sich einfach besser damit aus wie ich ;) Und zwar wenn ich
mich einwaehlen moechte erhalte vom ppp keine Fehlermeldung, im log sehe ich
aber folgendes:
Mar 29 12:00:45 free ppp[357]: Phase: Using interface: tun0
Mar 29 12:00:45 free ppp[357]: Phase: deflink: Created in closed state
Mar 29 12:00:45 free ppp[357]: Phase: PPP Started (interactive mode).
Mar 29 12:00:52 free ppp[357]: Phase: bundle: Establish
Mar 29 12:00:52 free ppp[357]: Phase: deflink: closed -> opening
Mar 29 12:00:52 free ppp[357]: Phase: deflink: Connected!
Mar 29 12:00:52 free ppp[357]: Phase: deflink: opening -> dial
Mar 29 12:00:52 free ppp[357]: Phase: deflink: dial -> carrier
Mar 29 12:00:58 free ppp[357]: Phase: deflink: /dev/i4brbch0: No carrier
(increase ``set cd'' from 6 ?)
Mar 29 12:00:58 free ppp[357]: Phase: deflink: Disconnected!
Mar 29 12:00:58 free ppp[357]: Phase: deflink: carrier -> hangup
Mar 29 12:00:58 free ppp[357]: Phase: deflink: Connect time: 6 secs: 0 octets
in, 0 octets out
Mar 29 12:00:58 free ppp[357]: Phase: deflink: : 0 packets in, 0 packets out
Mar 29 12:00:58 free ppp[357]: Phase: total 0 bytes/sec, peak 0 bytes/sec on
Fri Mar 29 12:00:58 2002
Mar 29 12:00:58 free ppp[357]: Phase: deflink: hangup -> closed
Mar 29 12:00:58 free ppp[357]: Phase: bundle: Dead
Die AVM Fritz PCI sollte soweit richtig installiert sein. Nun die isdnd.rc:
#==============================================================================
# entry section: PPP example
#==============================================================================
entry
name = I4BPPP
usrdevicename = isp
usrdeviceunit = 0
isdncontroller = 0
isdnchannel = -1
local-phone-incoming = *
remote-phone-incoming = 00191011 # T-Online mit 0 fuer Telefonanlage
local-phone-dialout = xxxxxxx # Meine Telefonnummer
remote-phone-dialout = 00191011 # T-Online mit 0 fuer Telefonanlage
remdial-handling = first
dialin-reaction = ignore
dialout-type = normal
b1protocol = hdlc
idletime-incoming = 240
idletime-outgoing = 40
ratetype = 0
unitlength = 60
unitlengthsrc = aocd
dialretries = 3
dialrandincr = on
recoverytime = 25
usedown = off
downtries = 2
downtime = 30
Nun die ppp.conf:
default:
set phone 00191011
set authname kennung
set authkey passwort
set timeout 60 300
set login
set hangup
set device /dev/i4brbch0
set speed sync
set log Phase LCP IPCP CCP Warning Error Alert
enable dns
set ifaddr 10.0.0.1/0 10.0.0.2/0 0.0.0.0 0.0.0.0
#add default HISADDR
Mit freundlichen Gruessen und schoene Ostern,
Christoph Dalke
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Fri 29 Mar 2002 - 12:12:02 CET