Problem mit Gnme

From: Martin Hasenbein <mh-freebsd-questions-de(at)space.net>
Date: Tue, 24 Jul 2001 13:06:06 +0200

Hi,

ich hab leider immer noch ein Problem mit Gnome.
Ich hab Gnome 1.4 über die Ports installiert und es
läuft einwandfrei..., aber wenn ich mich ausloggen will,
bleibt Gnome hängen. Ich kann es dann nur noch mit
Strg - Alt - Backspace beenden. Ich hab startx mal
mitloggen lassen. Vielleicht kann einer von Euch mir
weiterhelfen, wo der Fehler liegt. Ich glaube es hat
irgendwas mit Gtk zu tun, bin mir aber nicht sicher:

XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: FreeBSD 4.3-RELEASE i386 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Jul 23 18:56:08 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "ATI Mach64 GT (264GT), aka 3D RAGE"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "de"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI Mach64 GB rev 92, Mem @ 0xe4000000/24, 0xe6000000/12, I/O @ 0xe000/8
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
        ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
        ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
        ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
        ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
        ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI Radeon VE (AGP)
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 6.3.6
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(==) ATI(0): Write-combining range (0xa0000,0x20000) was already clear
(WW) ATI(0): Failed to set write-combining range (0xf0000,0x10000)
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): Manufacturer: GVT Model: 512 Serial#: 24200066
(II) ATI(0): Year: 2001 Week: 7
(II) ATI(0): EDID Version: 1.2
(II) ATI(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) ATI(0): Sync: Separate
(II) ATI(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
(II) ATI(0): Gamma: 2.20
(II) ATI(0): DPMS capabilities: Off; RGB/Color Display
(II) ATI(0): First detailed timing is preferred mode
(II) ATI(0): redX: 0.618 redY: 0.338 greenX: 0.297 greenY: 0.608
(II) ATI(0): blueX: 0.144 blueY: 0.101 whiteX: 0.314 whiteY: 0.332
(II) ATI(0): Supported VESA Video Modes:
(II) ATI(0): 720x400(at)70Hz
(II) ATI(0): 640x480(at)60Hz
(II) ATI(0): 640x480(at)67Hz
(II) ATI(0): 640x480(at)72Hz
(II) ATI(0): 640x480(at)75Hz
(II) ATI(0): 800x600(at)56Hz
(II) ATI(0): 800x600(at)60Hz
(II) ATI(0): 800x600(at)72Hz
(II) ATI(0): 800x600(at)75Hz
(II) ATI(0): 1024x768(at)60Hz
(II) ATI(0): 1024x768(at)70Hz
(II) ATI(0): 1024x768(at)75Hz
(II) ATI(0): Manufacturer's mask: 0
(II) ATI(0): Supported additional Video Mode:
(II) ATI(0): clock: 65.0 MHz Image Size: 304 x 228 mm
(II) ATI(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) ATI(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) ATI(0): Monitor name: SANYO
(II) ATI(0): Monitor name: LMU-TF150A6
(II) ATI(0): GMZ2+SANYO
(==) ATI(0): Write-combining range (0xa0000,0x10000) was already clear
(==) ATI(0): Write-combining range (0xe6000000,0x1000) was already clear
(--) ATI(0): ATI 3D Rage Pro graphics controller detected.
(--) ATI(0): Chip type 4742 "GB", version 4, foundry UMC, class 0, revision 0x01.
(--) ATI(0): AGP bus interface detected; block I/O base is 0xE000.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0xE47FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xE4000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
 due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xE6000400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xE6000000.
(==) ATI(0): Write-combining range (0xa0000,0x10000) was already clear
(==) ATI(0): Write-combining range (0xe4000000,0x800000)
(==) ATI(0): Write-combining range (0xe6000000,0x1000) was already clear
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): My Monitor: Using hsync range of 31.50-48.50 kHz
(II) ATI(0): My Monitor: Using vrefresh range of 50.00-70.00 Hz
(II) ATI(0): Maximum clock: 199.00 MHz
(II) ATI(0): Not using default mode "640x350" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x400" (vrefresh out of range)
(II) ATI(0): Not using default mode "720x400" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x600" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x600" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (vrefresh out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1400x1050" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (hsync out of range)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) ATI(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) ATI(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(--) ATI(0): Display dimensions: (30, 23) cm
(--) ATI(0): DPI set to (86, 84)
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(--) Depth 24 pixmap format is 32 bpp
(==) ATI(0): Write-combining range (0xa0000,0x10000) was already clear
(==) ATI(0): Write-combining range (0xe4000000,0x800000)
(==) ATI(0): Write-combining range (0xe6000000,0x1000) was already clear
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                10 256x256 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) Mouse1: Protocol: "MouseSystems"
(**) Mouse1: Core Pointer
(==) Mouse1: Buttons: 3
(**) Mouse1: BaudRate: 1200
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
SESSION_MANAGER=local/free.beastie.de:/tmp/.ICE-unix/6917
SetKbdSettings - type: 0 rate: 30 delay: 500 snumlk: 0
SetKbdSettings - Succeeded
GetModeLine - scrn: 0 clock: 65000
GetModeLine - hdsp: 1024 hbeg: 1048 hend: 1184 httl: 1344
              vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10

Gtk-WARNING **: gtk_signal_disconnect_by_data(): could not find handler containing data (0x81371A0)
X connection to :0.0 broken (explicit kill or server shutdown).
xinit: connection to X server lost.

waiting for X server to shut down

Danke
        /martin

---
--------------------------------------------------------------------
               Martin Hasenbein  Phone (Fax): (+49) 89 1216376-1 (3)
     \|/       Weiglstr.9	 mailto:martin(at)hasenbein.com        
     @ @       D-80636 München	 http://martin.hasenbein.com        
-oOO-(_)-OOo--------------------------------------------------------
                On the 8th day, god created Unix ;-)                
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Tue 24 Jul 2001 - 13:06:11 CEST

search this site