PPP dial-in Geschwindigkeit und Callback

From: K.A. Braselmann <bb(at)gag-norden.de>
Date: Thu, 10 May 2001 09:56:57 +0200

MoinZ,

bin gerade dabei meine _erste_ FreeBSD-Dial-In-Box zu erstellen.

Soweit, so gut. Aber der Speed beim Client (win95b) is sowas von
grottenschlecht... maximum ist 1-1,5 KByte/s. Es ist nur TCP/IP
konfiguriert, bei NT4 sieht es nicht viel besser aus.

jemand eine Idee?

Wenn ich Callback konfigurieren möchte passiert das ja in der
/etc/ppp.conf . Hat jemand mal so einen Demoeintrag, der
funktionukkelt, für mich?

Vielen Dank..... (sorry für die lange Mail:-)

Freundlichen Grüße aus Ostfriesland

André Braselmann
netzwerke/multimedia
bb(at)gag-norden.de

------------------------- config und logfiles ----------

/var/log/ppp.log:
---snip--------
May 10 09:30:51 rabbit ppp[270]: Phase: Using interface: tun0
May 10 09:30:51 rabbit ppp[270]: Phase: deflink: Created in closed state
May 10 09:30:51 rabbit ppp[270]: Phase: PPP Started (direct mode).
May 10 09:30:51 rabbit ppp[270]: Phase: bundle: Establish
May 10 09:30:51 rabbit ppp[270]: Phase: deflink: closed -> opening
May 10 09:30:51 rabbit ppp[270]: Phase: deflink: Connected!
May 10 09:30:51 rabbit ppp[270]: Phase: deflink: opening -> carrier
May 10 09:30:52 rabbit ppp[270]: Phase: deflink: /dev/cuaa0: CD detected
May 10 09:30:52 rabbit ppp[270]: Phase: deflink: carrier -> lcp
May 10 09:30:53 rabbit ppp[270]: Phase: deflink: lcp -> open
May 10 09:30:53 rabbit ppp[270]: Phase: bundle: Network
May 10 09:30:54 rabbit ppp[270]: Phase: Found interface ed0 for y.y.y.y
May 10 09:33:43 rabbit ppp[270]: Phase: deflink: open -> lcp
May 10 09:33:43 rabbit ppp[270]: Phase: bundle: Terminate
May 10 09:33:46 rabbit ppp[270]: Phase: deflink: Disconnected!
May 10 09:33:46 rabbit ppp[270]: Phase: deflink: Connect time: 175 secs: 8829 octets in, 94453 octets out
May 10 09:33:46 rabbit ppp[270]: Phase: deflink: : 439 packets in, 168 packets out
May 10 09:33:46 rabbit ppp[270]: Phase: total 590 bytes/sec, peak 2736 bytes/sec on Thu May 10 09:33:46 2001
May 10 09:33:47 rabbit ppp[287]: Phase: deflink: lcp -> closed
May 10 09:33:47 rabbit ppp[287]: Phase: bundle: Dead
May 10 09:33:47 rabbit ppp[287]: Phase: PPP Terminated (normal).
May 10 09:33:47 rabbit ppp[287]: Phase: Found interface ed0 for y.y.y.y
---snap----------

/var/log/mgetty.cuaa0
---------------------
05/10 09:33:46 aa0 mgetty: experimental test release 1.1.25-Feb01
...
05/10 09:33:50 aa0 send: AT&D3X3M1V1Q0S0=0[0d]
...
05/10 09:34:25 aa0 CND: CONNECT 26400
05/10 09:34:25 aa0 CND: found: 26400 ** found **
05/10 09:34:25 aa0 waiting for line to clear (VTIME), read: [0a]
05/10 09:34:25 aa0 utmp + wtmp entry made
05/10 09:34:26 aa0 tio_set_flow_control( HARD )
05/10 09:34:26 aa0 print welcome banner (/etc/issue)
05/10 09:34:26 aa0 getlogname (AUTO_PPP), read:~[ff]}#[c0]!
05/10 09:34:27 aa0 input finished with '\r', setting ICRNL ONLCR
05/10 09:34:27 aa0 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
05/10 09:34:27 aa0 login: use login config file /usr/local/etc/mgetty+sendfax/login.config
05/10 09:34:27 aa0 match: user='/AutoPPP/', key='/AutoPPP/'*** hit!
05/10 09:34:27 aa0 calling login: cmd='/etc/ppp/ppp-dialup', argv[]='ppp-dialup'
05/10 09:34:27 ##### data dev=cuaa0, pid=286, caller='none', conn='26400', name='', cmd='/etc/ppp/ppp-dialup', user='/AutoPPP/'

05/10 09:34:27 aa0 setenv: 'CALLER_ID=none'
05/10 09:34:27 aa0 setenv: 'CALLED_ID='
05/10 09:34:27 aa0 setenv: 'CONNECT=26400'

----------------------
Hard/Soft:
4.3-REL, mgetty 1.1.25, Ericsson Modem 34HE (davon hab ich noch
mehr:-)

bisherige config:

/etc/ppp/ppp.conf:
---snip--------
default:
set device /dev/cuaa0
accept pap
accept chap
set ifaddr x.x.x.x y.y.y.y 255.255.255.0
enable proxy
enable passwdauth
set dns z.z.z.z

---snap-------

/etc/ppp/ppp-dialup :
---snip--------
#!/bin/sh
exec /usr/sbin/ppp -direct $IDENT
---snap--------

/usr/local/etc/mgetty+sendfax/mgetty.config
---snip--------
port cuaa0
debug 4
fax-id 00 00 000000
speed 115200
direct NO
blocking NO
port-owner uucp
port-group uucp
port-mode 0660
toggle-dtr YES
toggle-dtr-waittime 500
data-only YES
fax-only NO
modem-type auto
init-chat "" AT&D3X3M1V1Q0S0=0 OK
modem-check-time 3600
rings 1
answer-chat "" ATA CONNECT \c \r
answer-chat-timeout 40
autobauding NO
ringback NO
ringback-time 30
ignore-carrier false
issue-file /etc/issue
prompt-waittime 500
login-prompt @!login:
login-time 240
diskspace 1024
notify faxadmin
fax-owner uucp
fax-group modem
fax-mode 0660
----snap-------

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Thu 10 May 2001 - 09:57:07 CEST