Re: pppd und -current

From: Andreas Kohout <shanee(at)augusta.de>
Date: Sun, 10 Jan 1999 21:38:39 +0100

Hallo,

neuester Stand der Dinge: ich habe auf 3.0-RELEASE downgegraded ...

kein Erfolg, weiterhin weigert sich der alte und der neue pppd zu
funktionieren.

Debug des pppd 2.2 (Auszug):

Jan 10 21:20:45 rabbit pppd[9164]: sent [LCP ConfAck id=0x7 <asyncmap 0x0> <magic 0xc19a2700> <pcomp> <accomp> <auth upap>]
Jan 10 21:20:48 rabbit pppd[9164]: sent [LCP ConfReq id=0x1 <mru 1500> <magic 0xa741ec40> <pcomp> <accomp>]
Jan 10 21:20:48 rabbit pppd[9164]: rcvd [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0xc19a2700> <pcomp> <accomp> <auth upap>]
[...]
Jan 10 21:21:22 rabbit pppd[9164]: sent [LCP ConfAck id=0x13 <asyncmap 0x0> <mag
ic 0xc19a2700> <pcomp> <accomp> <auth upap>]
Jan 10 21:21:25 rabbit pppd[9164]: sent [LCP ConfReq id=0x2 <mru 1500> <magic 0x
97e1eb15> <pcomp> <accomp>]
Jan 10 21:21:25 rabbit pppd[9164]: rcvd [LCP ConfReq id=0x14 <asyncmap 0x0> <mag
ic 0xc19a2700> <pcomp> <accomp> <auth upap>]
Jan 10 21:21:25 rabbit pppd[9164]: sent [LCP ConfAck id=0x14 <asyncmap 0x0> <mag
ic 0xc19a2700> <pcomp> <accomp> <auth upap>]
Jan 10 21:21:28 rabbit pppd[9164]: LCP: timeout sending Config-Requests
Jan 10 21:21:28 rabbit pppd[9164]: Hangup (SIGHUP)
Jan 10 21:21:28 rabbit pppd[9164]: Modem hangup
Jan 10 21:21:28 rabbit pppd[9164]: Exit.

Debug des neuen pppd 2.3.5 (Auszug):

Jan 10 21:22:28 rabbit pppd[9336]: sent [LCP ConfAck id=0x6 <asyncmap 0x0> <magic 0xb5bf885> <pcomp> <accomp> <auth pap>]
Jan 10 21:22:31 rabbit pppd[9336]: sent [LCP ConfReq id=0x1 <magic 0x3aca2ab1> <pcomp> <accomp>]
Jan 10 21:22:31 rabbit pppd[9336]: rcvd [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0xb5bf885> <pcomp> <accomp> <auth pap>]
[...]
Jan 10 21:23:08 rabbit pppd[9336]: sent [LCP ConfAck id=0x13 <asyncmap 0x0> <mag
ic 0xb5bf885> <pcomp> <accomp> <auth pap>]
Jan 10 21:23:10 rabbit pppd[9336]: sent [LCP ConfReq id=0x2 <magic 0x5f2a0732> <
pcomp> <accomp>]
Jan 10 21:23:11 rabbit pppd[9336]: rcvd [LCP ConfReq id=0x14 <asyncmap 0x0> <mag
ic 0xb5bf885> <pcomp> <accomp> <auth pap>]
Jan 10 21:23:11 rabbit pppd[9336]: sent [LCP ConfAck id=0x14 <asyncmap 0x0> <mag
ic 0xb5bf885> <pcomp> <accomp> <auth pap>]
Jan 10 21:23:13 rabbit pppd[9336]: LCP: timeout sending Config-Requests
Jan 10 21:23:14 rabbit pppd[9336]: Modem hangup, connected for 1 minutes
Jan 10 21:23:14 rabbit pppd[9336]: Connection terminated, connected for 1 minutes
Jan 10 21:23:15 rabbit pppd[9336]: Exit.

Frage: warum die <pcomp> <accomp>, wo ich doch explizit im /etc/ppp/
options nopcomp und noaccomp stehen habe?

nochmal das /etc/ppp/options

root(at)rabbit# cat /etc/ppp/options
crtscts
lock
domain augusta.de
debug
noaccomp
nopcomp

und das /etc/ppp/peers/inga

root(at)rabbit# cat /etc/ppp/peers/inga
/dev/cuaa0
115200
crtscts
modem
connect "/usr/bin/chat -v -f /etc/ppp/peers/inga.chat"
user Pshanee
noipdefault
passive
domain augusta.de
:193.175.23.66
defaultroute

und das /etc/ppp/pap-secrets

root(at)rabbit# cat /etc/ppp/pap-secrets
# /etc/ppp/pap-secrets
#
# user server secret
Pshanee * MYPASSWORD *

Dann dachte ich, nimm halt den (userland) ppp ...

Jan 10 21:15:32 rabbit ppp[8643]: Phase: Using interface: tun0
Jan 10 21:15:32 rabbit ppp[8643]: Phase: deflink: Created in closed state
Jan 10 21:15:32 rabbit ppp[8643]: tun0: Command: default: set device /dev/cuaa0
Jan 10 21:15:32 rabbit ppp[8643]: tun0: Command: default: set speed 115200
Jan 10 21:15:32 rabbit ppp[8643]: tun0: Command: default: set dial ABORT BUSY AB
ORT NO\sCARRIER TIMEOUT 5 "" AT&FB40E1Q0 OK-AT-OK \dATDT\T TIMEOUT 40 CONNECT
Jan 10 21:15:32 rabbit ppp[8643]: tun0: Phase: PPP Started (interactive mode).
Jan 10 21:15:41 rabbit ppp[8643]: tun0: Command: /dev/tty: show version
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Command: /dev/tty: dial inga
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Command: inga: set phone 407982
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Command: inga: set login
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Command: inga: set timeout 300
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Command: inga: set ifaddr 10.0.0.1/0 10.
0.0.2/0 255.255.255.0 0.0.0.0
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Command: inga: add default HISADDR
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Command: inga: enable dns
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Command: inga: set authname Pshanee
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Command: inga: set authkey ********
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Command: inga: accept PAP
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Phase: bundle: Establish
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Phase: deflink: closed -> opening
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Phase: deflink: Connected!
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Phase: deflink: opening -> dial
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Phase: Phone: 407982
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Chat: deflink: Dial attempt 1 of 1
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Chat: Send: AT&FB40E1Q0^M
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Chat: Expect(5): OK
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Chat: Received: AT&FB40E1Q0^M^M
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Chat: Received: OK^M
Jan 10 21:15:48 rabbit ppp[8643]: tun0: Chat: Send: ATDT407982^M
Jan 10 21:15:50 rabbit ppp[8643]: tun0: Chat: Expect(40): CONNECT
Jan 10 21:15:50 rabbit ppp[8643]: tun0: Chat: Received: ATDT407982^M^M
Jan 10 21:15:50 rabbit ppp[8643]: tun0: Chat: Received: CONNECT 115200/PPP 6400
0/NONE^M
Jan 10 21:15:50 rabbit ppp[8643]: tun0: Phase: deflink: dial -> login
Jan 10 21:15:50 rabbit ppp[8643]: tun0: Phase: deflink: login -> lcp
Jan 10 21:15:50 rabbit ppp[8643]: tun0: LCP: FSM: Using "deflink" as a transport
Jan 10 21:15:50 rabbit ppp[8643]: tun0: LCP: deflink: State change Initial --> C
losed
Jan 10 21:15:50 rabbit ppp[8643]: tun0: LCP: deflink: State change Closed --> St
opped
Jan 10 21:15:51 rabbit ppp[8643]: tun0: LCP: deflink: LayerStart
Jan 10 21:15:51 rabbit ppp[8643]: tun0: LCP: deflink: SendConfigReq(1) state = S
topped
Jan 10 21:15:51 rabbit ppp[8643]: tun0: LCP: ACFCOMP[2]
Jan 10 21:15:51 rabbit ppp[8643]: tun0: LCP: PROTOCOMP[2]
Jan 10 21:15:51 rabbit ppp[8643]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 10 21:15:51 rabbit ppp[8643]: tun0: LCP: MRU[4] 1500
Jan 10 21:15:51 rabbit ppp[8643]: tun0: LCP: MAGICNUM[6] 0x05200e21
Jan 10 21:15:51 rabbit ppp[8643]: tun0: LCP: deflink: State change Stopped --> R
eq-Sent
Jan 10 21:15:54 rabbit ppp[8643]: tun0: LCP: deflink: SendConfigReq(1) state = R
eq-Sent
Jan 10 21:15:54 rabbit ppp[8643]: tun0: LCP: ACFCOMP[2]
Jan 10 21:15:54 rabbit ppp[8643]: tun0: LCP: PROTOCOMP[2]
Jan 10 21:15:54 rabbit ppp[8643]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 10 21:15:54 rabbit ppp[8643]: tun0: LCP: MRU[4] 1500
Jan 10 21:15:54 rabbit ppp[8643]: tun0: LCP: MAGICNUM[6] 0x05200e21
Jan 10 21:15:54 rabbit ppp[8643]: tun0: Phase: Unknown protocol 0x0801 (unrecogn
ised protocol)
Jan 10 21:15:54 rabbit ppp[8643]: tun0: LCP: deflink: SendProtocolRej(1) state =
Req-Sent
Jan 10 21:15:57 rabbit ppp[8643]: tun0: LCP: deflink: SendConfigReq(1) state = R
eq-Sent
Jan 10 21:15:57 rabbit ppp[8643]: tun0: LCP: ACFCOMP[2]
Jan 10 21:15:57 rabbit ppp[8643]: tun0: LCP: PROTOCOMP[2]
Jan 10 21:15:57 rabbit ppp[8643]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 10 21:15:57 rabbit ppp[8643]: tun0: LCP: MRU[4] 1500
Jan 10 21:15:57 rabbit ppp[8643]: tun0: LCP: MAGICNUM[6] 0x05200e21
Jan 10 21:15:59 rabbit ppp[8643]: tun0: Phase: Unknown protocol 0x0801 (unrecogn
ised protocol)
Jan 10 21:15:59 rabbit ppp[8643]: tun0: LCP: deflink: SendProtocolRej(1) state =
Req-Sent
Jan 10 21:16:00 rabbit ppp[8643]: tun0: LCP: deflink: SendConfigReq(1) state = R
eq-Sent
Jan 10 21:16:00 rabbit ppp[8643]: tun0: LCP: ACFCOMP[2]

[...]

Jan 10 21:16:03 rabbit ppp[8643]: tun0: LCP: PROTOCOMP[2]
Jan 10 21:16:03 rabbit ppp[8643]: tun0: LCP: ACCMAP[6] 0x00000000
Jan 10 21:16:03 rabbit ppp[8643]: tun0: LCP: MRU[4] 1500
Jan 10 21:16:03 rabbit ppp[8643]: tun0: LCP: MAGICNUM[6] 0x05200e21
Jan 10 21:16:04 rabbit ppp[8643]: tun0: Phase: Unknown protocol 0x0801 (unrecogn
ised protocol)
Jan 10 21:16:04 rabbit ppp[8643]: tun0: LCP: deflink: SendProtocolRej(1) state =
Req-Sent
Jan 10 21:16:06 rabbit ppp[8643]: tun0: LCP: deflink: LayerFinish
Jan 10 21:16:06 rabbit ppp[8643]: tun0: LCP: deflink: State change Req-Sent -->
Stopped
Jan 10 21:16:06 rabbit ppp[8643]: tun0: LCP: deflink: State change Stopped --> C
losed
Jan 10 21:16:06 rabbit ppp[8643]: tun0: LCP: deflink: State change Closed --> In
itial
Jan 10 21:16:06 rabbit ppp[8643]: tun0: Phase: deflink: Disconnected!
Jan 10 21:16:06 rabbit ppp[8643]: tun0: Phase: deflink: lcp -> hangup
Jan 10 21:16:06 rabbit ppp[8643]: tun0: Phase: deflink: Connect time: 18 secs: 2
7 octets in, 346 octets out
Jan 10 21:16:06 rabbit ppp[8643]: tun0: Phase: total 20 bytes/sec, peak 28 byte
s/sec on Sun Jan 10 21:16:06 1999
Jan 10 21:16:06 rabbit ppp[8643]: tun0: Phase: deflink: hangup -> closed
Jan 10 21:16:06 rabbit ppp[8643]: tun0: Phase: bundle: Dead

Was bitte ist das für ein unbekanntes Protokoll 0x0801???

hier das /etc/ppp.conf

root(at)rabbit# cat /etc/ppp/ppp.conf
default:
  set log Phase Chat LCP IPCP CCP tun command
  set device /dev/cuaa0
  set speed 115200
  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT&FB40E1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT"
inga:
  set phone 407982
  set login
  set timeout 300
  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
  add default HISADDR
  enable dns
  set authname Pshanee
  set authkey MYPASSWORD
  accept PAP

und das /etc/ppp.linkup

root(at)rabbit# cat /etc/ppp/ppp.linkup
inga:
delete ALL
add default HISADDR

kernel ist 3.0-RELEASE aout (auch mit elf probiert), System ist
3.0-RELEASE elf (frisches make world von eben ... Sourcen von der CD).

Nachdem der 2.2 pppd auch nicht mehr geht werde ich wohl auf 2.2.6 runter
müssen, oder gibt es irgendwo ein 3.0 das PPP und PAP verwendet?

Schonmal Danke ...

PS: Hilfen der Art "schau mal nach http://..." helfen Momentan wenig ...

-- 
Gruß, Andy
--------------------------------------------------------------------------
                  Der Mensch hat die Atombombe erfunden, 
              eine Maus würde niemals eine Mausefalle bauen!
shanee(at)augusta.de                                            Zirbelnußtown
__________________________________________________________________________

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Tue 12 Jan 1999 - 00:11:26 CET