Hilfe: Sound-Kartekonfigurieren

Hallo,
was ISA und IRQs/Memory angeht, weiss ich leider überhaupt nix.
Ich hab folgendes im Kernel
-----
device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr
-----
beim booten kommt dann folgendes:
.....
pcm0 at 0x220 irq 5 drq 1 on isa
WARNING: sb: misconfigured secondary DMA channel
.....
Wie konfiguriere ich jetzt den zweiten DMA-Channel ?

Hier ist das, was PNP-Info ausspuckt:
[sorry]
*****
Checking for Plug-n-Play devices...

Card assigned CSN #1
Vendor ID CTL0070 (0x70008c0e), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 16
Device Description: Breative ViBRA16B PnP

Logical Device ID: CTL0001 0x01008c0e #0
Device Description: Audio
TAG Start DF
Good Configuration
    IRQ: 5 - only one type (true/edge)
    DMA: channel(s) 1
        8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5
        16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10
        [16-bit addr]
    I/O Range 0x230 .. 0x230, alignment 0x1, len 0x10
        [16-bit addr]
*** ITEM 0x00 detected
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10 - only one type (true/edge)
    DMA: channel(s) 1 3
        8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 7
        16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
        [16-bit addr]
    I/O Range 0x200 .. 0x230, alignment 0x30, len 0x10
        [16-bit addr]
*** ITEM 0x00 detected
*** ITEM 0x00 detected
*** ITEM 0x00 detected
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x2a
        [16-bit addr]

Logical Device ID: @I(at)0280 0x80022001 #1
        Device supports I/O Range Check
    I/O Range 0x200 .. 0x230, alignment 0x30, len 0x2
        [16-bit addr]
TAG Start DF
Sub-optimal Configuration
    IRQ: 5 7 9 10 - only one type (true/edge)
    DMA: channel(s) 1 3
        8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 7
        16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
        [16-bit addr]
TAG Start DF
Sub-optimal Configuration
    IRQ: 5 7 9 10 - only one type (true/edge)
    DMA: channel(s) 1 3
        8-bit, not a bus master, count by byte, , Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
        [16-bit addr]
    I/O Range 0x300 .. 0x230, alignment 0x30, len 0x2
        [16-bit addr]
    I/O Range 0x288 .. 0x388, alignment 0x1, len 0x2
        [16-bit addr]
*** ITEM 0x00 detected
*** ITEM 0x00 detected
*** ITEM 0x00 detected
    IRQ: 7 9 - only one type (true/edge)

Logical Device ID: @@B0846 0x46080280 #2
        Device powers up active
TAG End DF

Logical Device ID: CTL7001 0x01708c0e #3
Compatible Device ID: PNPb02f (2fb0d041)
Device Description: Fame
    I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8
        [16-bit addr]
End Tag

Successfully got 46 resources, 4 logical fdevs
-- card select # 0x0001

CSN CTL0070 (0x70008c0e), Serial Number 0xffffffff

Logical device #0
IO: 0x0220 0x0230 0x0288 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 5 0
DMA 1 5
IO range check 0x00 activate 0x01

Logical device #1
IO: 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01

Logical device #2
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x00

Logical device #2
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x00
*****

Danke,
Rainer

-- 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|Rainer Duffner, E-Mail: duffner(at)fh-konstanz.de  |
|        &   Rainer.Duffner(at)konstanz.netsurf.de  |
|Fachhochschule Konstanz, Germany                |
|"What's a Network ?"  - Bill Gates, early 1980s |
|   WWW:http://www-stud.fh-konstanz.de/~duffner  |
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~