Re: Xorg will meine gewünschte Auflösung nicht: mode "1600x1200" (exceeds panel dimensions)

From: Heino Tiedemann <rotkaps_spam_trap(at)GMX.de>
Date: Sun, 24 Nov 2013 16:53:41 +0100

Oliver Fromme <olli(at)lurza.secnetix.de> wrote:

> Heino Tiedemann wrote:
> > Dieser nvidia kram ist ja echt der allergrößte Mist.
> >
> > "No Screens Found" sagt mir der Teiber. und startet gar nicht.
> >
> > Die Xorg.conf habe ich nur von "nv" auf "nvidia" geändert.
>
> Die alte xorg.conf musst Du ganz entsorgen. Da stehen evtl.
> noch Dinge drin, die das Autoconfigure bei dem nv-Treiber
> gefunden hat und die mit dem nvidia-Treiber nicht gehen.
> Schau auch im Xorg.0.log nach, ob und welche xorg.conf er
> lädt, nur um ganz sicher zu gehen.

Also Fazit bis jetzt:

Weiter komme ich mit dem nv Trieber.

1) er startet X
2) ich habe Maus
3) nur die Auflösung stimmt nicht

Der nvidia Binärtreiber:

1) er startet nur ohne xorg.conf
1) keine maus
2) wenn er startet, dann ist die auflösung NOCH GRÖBER nämlich
1024x768 (was echt albern aussieht auf dem Pannel)

Den BLOB Triber will ich nicht weiter verwenden

ein Xorg -configure ist gar nicht möglich, und eine untergeschobene
und angepasste xorg.conf schmäht er.

Komme ich noch mal zum log des NV zurück:

,----
| (--) NV: Found NVIDIA Quadro FX 3450/4000 SDI at 64(at)00:00:0
`----

Okay sowweit..

Da fehlt die 1600x1200, aber die 12080x1024 fhalt auch.

Nun aber, was bedeutet das:

,----
| (II) NV(0): Manufacturer's mask: 0
| (II) NV(0): Supported standard timings:
| (II) NV(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
| (II) NV(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
| (II) NV(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
| (II) NV(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
`----

DA IST SIE DOCH: #0: hsize: 1600 vsize 1200 refresh: 60

Und hier auch:

,----
| (II) NV(0): Supported detailed timing:
| (II) NV(0): clock: 162.0 MHz Image Size: 432 x 324 mm
| (II) NV(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
| (II) NV(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
| (II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz
| (II) NV(0): Monitor name: SyncMaster
| (II) NV(0): Serial No: HSGL800438
`----

Aber dann kommt dieses:

,----
| (II) NV(0): Using DFP on CRTC 0
| (--) NV(0): Panel size is 1280 x 1024
| (II) NV(0): NOTE: This driver cannot reconfigure the BIOS-programmed size.
| (II) NV(0): These dimensions will be used as the panel size for mode validation.
`----

DAS muss ich nur überwinden.

Und dann wieder werden die 1600 erwähnt - in den Modelines

,----
| (II) NV(0): EDID vendor "SAM", prod id 464
| (II) NV(0): Using hsync ranges from config file
| (II) NV(0): Using vrefresh ranges from config file
| (II) NV(0): Printing DDC gathered Modelines:
| (II) NV(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
| (II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
| (II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
| (II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
| (II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
| (II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
| (II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
| (II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
| (II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
| (II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
| (II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
| (II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
| (II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
| (II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
| (II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
| (II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
| (II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
| (II) NV(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
`----

Es wird iergendwie erwähnt das er 1600x1200(at)60 kann, aber er macht es nicht..

Hier werden wohl noch mal alle "bösen" Auflösungen gelistet:

,----
| (II) NV(0): Panel is TMDS
| (--) NV(0): VideoRAM: 262144 kBytes
| (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
| (II) NV(0): Monitor0: Using hsync range of 30.00-81.00 kHz
| (II) NV(0): Monitor0: Using vrefresh range of 56.00-75.00 Hz
| (II) NV(0): Monitor0: Using maximum pixel clock of 170.00 MHz
| (II) NV(0): Clock range: 12.00 to 400.00 MHz
| (II) NV(0): Not using default mode "640x350" (vrefresh out of range)
| (II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "640x400" (vrefresh out of range)
| (II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "720x400" (vrefresh out of range)
| (II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "640x480" (vrefresh out of range)
| (II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "800x600" (vrefresh out of range)
| (II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
| (II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1280x960" (hsync out of range)
| (II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1280x1024" (hsync out of range)
| (II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1792x1344" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1792x1344" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1856x1392" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1856x1392" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
| (II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
| (II) NV(0): Not using driver mode "1600x1200" (exceeds panel dimensions)
| (II) NV(0): Not using mode "1600x1200(at)60" (no mode of this name)
| (--) NV(0): Virtual size is 1280x1024 (pitch 1280)
`----

Was sollen die letzen Zeilen? "1600x1200(at)60" (no mode of this name)

So ein käse, onen hatte er doch eine Modeline..

Nämlich diese:

,----
| (II) NV(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
`----

Mir scheint er hat erst diese 1600x1000, aber dann kommt irgendwas, wo
er meit "oh nee, doch nicht"...

hier ist die Modeline weg:

,----
| (**) NV(0): Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
| (II) NV(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
| (**) NV(0): Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
| (II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
| (**) NV(0): Driver mode "1280x1024": 90.8 MHz, 63.0 kHz, 59.8 Hz
| (II) NV(0): Modeline "1280x1024"x59.8 90.75 1280 1328 1360 1440 1024 1027 1034 1054 +hsync -vsync (63.0 kHz)
| (**) NV(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
| (II) NV(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
| (**) NV(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
| (II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
| (**) NV(0): Driver mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
| (II) NV(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
| (**) NV(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
| (II) NV(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
| (**) NV(0): Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
| (II) NV(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
| (**) NV(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
| (II) NV(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
| (**) NV(0): Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
| (II) NV(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
| (**) NV(0): Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
| (II) NV(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
| (**) NV(0): Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
| (II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
| (**) NV(0): Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
| (II) NV(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
| (**) NV(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
| (II) NV(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
| (**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
| (II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
| (**) NV(0): Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
| (II) NV(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
| (**) NV(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
| (II) NV(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
| (**) NV(0): Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
| (II) NV(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
| (**) NV(0): Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
| (II) NV(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
| (**) NV(0): Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
| (II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
| (**) NV(0): Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
| (II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
| (**) NV(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
| (II) NV(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
| (**) NV(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
| (II) NV(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
| (**) NV(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
| (II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
| (**) NV(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
| (II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
| (**) NV(0): Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
| (II) NV(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
| (**) NV(0): Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
| (II) NV(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
| (**) NV(0): Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
| (II) NV(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
| (**) NV(0): Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
| (II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
| (**) NV(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
| (II) NV(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
| (**) NV(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
| (II) NV(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
| (**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
| (II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
| (**) NV(0): Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
| (II) NV(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
`----

Und dann wird das Panel auch noch mal neu in seiner Größe Bestimmt:

,----
| (**) NV(0): Display dimensions: (430, 320) mm
`----

Oben waren es 432x324

Also ich denke es müsste einfach dem Triber gesagt werden "Halt die
Fresse und mach was dir gesagt wird"

Hat Xorg da nicht möglichkeiten?

Heino

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Sun 24 Nov 2013 - 16:54:05 CET