Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
    root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <DELL   B8K    >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU          6700  @ 2.66GHz (2660.04-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 2145107968 (2045 MB)
avail memory = 2085629952 (1989 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 1.1> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL B8K    > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xdeff0000-0xdeffffff irq 18 at device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:19:b9:29:ce:d0
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x4f00-0x4fff at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdfffc000-0xdfffcfff irq 21 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfffbf00-0xdfffbfff irq 22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: waiting for BIOS to give up control
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
uhub2: vendor 0x0424 product 0x2502, class 9/0, rev 2.00/0.01, addr 2
uhub2: single transaction translator
uhub2: 2 ports with 1 removable, self powered
uhub3: vendor 0x0424 product 0x2602, class 9/0, rev 2.00/0.00, addr 3
uhub3: multiple transaction translators
uhub3: 4 ports with 3 removable, self powered
umass0: Generic Flash Card Reader, rev 2.00/4.44, addr 4
umass1: TEAC CA-200, rev 2.00/4.00, addr 5
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xecf0-0xecff at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfecf mem 0xdfffd000-0xdfffdfff irq 23 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xfe40-0xfe47,0xfe50-0xfe53,0xfe60-0xfe67,0xfe70-0xfe73,0xfed0-0xfedf mem 0xdfffe000-0xdfffefff irq 20 at device 14.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff mem 0xdffff000-0xdfffffff irq 21 at device 14.2 on pci0
ata6: <ATA channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
pcib4: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ath0: <Atheros 5212> mem 0xdddf0000-0xdddfffff irq 18 at device 2.0 on pci4
ath0: Ethernet address: 00:09:5b:ec:e5:a4
ath0: mac 5.9 phy 4.3 radio 4.6
pci4: <multimedia, audio> at device 4.0 (no driver attached)
pci4: <unknown> at device 5.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xdddeb800-0xdddebfff,0xdddec000-0xdddeffff irq 18 at device 10.0 on pci4
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 80:b9:19:00:d0:ce:29:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 82:b9:19:ce:29:00
fwe0: Ethernet address: 82:b9:19:ce:29:00
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcib5: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pci6: <ACPI PCI bus> on pcib6
nvidia0: <GeForce 8800 GTX> port 0xcc80-0xccff mem 0xd5000000-0xd5ffffff,0xc0000000-0xcfffffff,0xd6000000-0xd7ffffff irq 16 at device 0.0 on pci6
nvidia0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xce7ff,0xce800-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub4: Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 2
uhub4: 3 ports with 2 removable, bus powered
ukbd0: Dell Dell USB Keyboard, rev 1.10/2.00, addr 3, iclass 3/1
kbd2 at ukbd0
uhid0: Dell Dell USB Keyboard, rev 1.10/2.00, addr 3, iclass 3/1
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 4, iclass 3/1
ums0: 6 buttons and Z dir.
Timecounters tick every 1.000 msec
ad4: 476940MB <Seagate ST3500630AS 3.ADG> at ata2-master SATA300
ad6: 476940MB <Seagate ST3500630AS 3.ADG> at ata3-master SATA300
acd0: DVDR <TSSTcorp DVD+/-RW TS-H653A/D300> at ata4-master SATA150
acd1: CDRW <HL-DT-ST CD-RW/DVD-ROM GCC-H10N/C103> at ata5-master SATA150
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
da2 at umass-sim1 bus 1 target 0 lun 0
da2: <TEAC USB   HS-CF Card 4.00> Removable Direct Access SCSI-0 device 
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic Flash HS-CF 4.44> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim1 bus 1 target 0 lun 1
da3: <TEAC USB   HS-xD/SM 4.00> Removable Direct Access SCSI-0 device 
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic Flash HS-COMBO 4.44> Removable Direct Access SCSI-0 device 
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da4 at umass-sim1 bus 1 target 0 lun 2
da4: <TEAC USB   HS-MS Card 4.00> Removable Direct Access SCSI-0 device 
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
da5 at umass-sim1 bus 1 target 0 lun 3
da5: <TEAC USB   HS-SD Card 4.00> Removable Direct Access SCSI-0 device 
da5: 40.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da2:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da2:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da2:umass-sim1:1:0:0): SCSI Status: Check Condition
(da2:umass-sim1:1:0:0): NOT READY asc:3a,0
(da2:umass-sim1:1:0:0): Medium not present
(da2:umass-sim1:1:0:0): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da2:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da2:umass-sim1:1:0:0): SCSI Status: Check Condition
(da2:umass-sim1:1:0:0): NOT READY asc:3a,0
(da2:umass-sim1:1:0:0): Medium not present
(da2:umass-sim1:1:0:0): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da2:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da2:umass-sim1:1:0:0): SCSI Status: Check Condition
(da2:umass-sim1:1:0:0): NOT READY asc:3a,0
(da2:umass-sim1:1:0:0): Medium not present
(da2:umass-sim1:1:0:0): Unretryable error
Opened disk da2 -> 6
(da3:umass-sim1:1:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 
(da3:umass-sim1:1:0:1): CAM Status: SCSI Status Error
(da3:umass-sim1:1:0:1): SCSI Status: Check Condition
(da3:umass-sim1:1:0:1): NOT READY asc:3a,0
(da3:umass-sim1:1:0:1): Medium not present
(da3:umass-sim1:1:0:1): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim1:1:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 
(da3:umass-sim1:1:0:1): CAM Status: SCSI Status Error
(da3:umass-sim1:1:0:1): SCSI Status: Check Condition
(da3:umass-sim1:1:0:1): NOT READY asc:3a,0
(da3:umass-sim1:1:0:1): Medium not present
(da3:umass-sim1:1:0:1): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim1:1:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 
(da3:umass-sim1:1:0:1): CAM Status: SCSI Status Error
(da3:umass-sim1:1:0:1): SCSI Status: Check Condition
(da3:umass-sim1:1:0:1): NOT READY asc:3a,0
(da3:umass-sim1:1:0:1): Medium not present
(da3:umass-sim1:1:0:1): Unretryable error
Opened disk da3 -> 6
(da4:umass-sim1:1:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 
(da4:umass-sim1:1:0:2): CAM Status: SCSI Status Error
(da4:umass-sim1:1:0:2): SCSI Status: Check Condition
(da4:umass-sim1:1:0:2): NOT READY asc:3a,0
(da4:umass-sim1:1:0:2): Medium not present
(da4:umass-sim1:1:0:2): Unretryable error
Opened disk da4 -> 6
(da4:umass-sim1:1:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 
(da4:umass-sim1:1:0:2): CAM Status: SCSI Status Error
(da4:umass-sim1:1:0:2): SCSI Status: Check Condition
(da4:umass-sim1:1:0:2): NOT READY asc:3a,0
(da4:umass-sim1:1:0:2): Medium not present
(da4:umass-sim1:1:0:2): Unretryable error
Opened disk da4 -> 6
(da4:umass-sim1:1:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 
(da4:umass-sim1:1:0:2): CAM Status: SCSI Status Error
(da4:umass-sim1:1:0:2): SCSI Status: Check Condition
(da4:umass-sim1:1:0:2): NOT READY asc:3a,0
(da4:umass-sim1:1:0:2): Medium not present
(da4:umass-sim1:1:0:2): Unretryable error
Opened disk da4 -> 6
(da5:umass-sim1:1:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 
(da5:umass-sim1:1:0:3): CAM Status: SCSI Status Error
(da5:umass-sim1:1:0:3): SCSI Status: Check Condition
(da5:umass-sim1:1:0:3): NOT READY asc:3a,0
(da5:umass-sim1:1:0:3): Medium not present
(da5:umass-sim1:1:0:3): Unretryable error
Opened disk da5 -> 6
(da5:umass-sim1:1:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 
(da5:umass-sim1:1:0:3): CAM Status: SCSI Status Error
(da5:umass-sim1:1:0:3): SCSI Status: Check Condition
(da5:umass-sim1:1:0:3): NOT READY asc:3a,0
(da5:umass-sim1:1:0:3): Medium not present
(da5:umass-sim1:1:0:3): Unretryable error
Opened disk da5 -> 6
(da5:umass-sim1:1:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 
(da5:umass-sim1:1:0:3): CAM Status: SCSI Status Error
(da5:umass-sim1:1:0:3): SCSI Status: Check Condition
(da5:umass-sim1:1:0:3): NOT READY asc:3a,0
(da5:umass-sim1:1:0:3): Medium not present
(da5:umass-sim1:1:0:3): Unretryable error
Opened disk da5 -> 6
Trying to mount root from ufs:/dev/ad4s2a