Moin
Ich bekomme "mbmon" oder "consolehm (chm)" nicht zum laufen - beide
behaupten das smb device wäre nicht konfiguriert. Aber was kann ich da
machen?
"/dev/smb0" ist zu sehen
0 crw------- 1 root wheel 0, 145 4 Aug 13:14 smb0
* consolehm
-----------------------------
chm -S
Using SMBUS Method.
ioctl: Device not configured
....
* mbmon
-----------------------------
mbmon -d
ioctl(smb0:writebyte): Device not configured
-----------------------------
* sysctl
-----------------------------
sysctl -a | grep smb
dev.ichsmb.0.%desc: SMBus controller
dev.ichsmb.0.%driver: ichsmb
dev.ichsmb.0.%location: slot=31 function=3
dev.ichsmb.0.%pnpinfo: vendor=0x8086 device=0x266a subvendor=0x8086
subdevice=0x3444 class=0x0c0500
dev.ichsmb.0.%parent: pci0
dev.smbus.0.%desc: System Management Bus
dev.smbus.0.%driver: smbus
dev.smbus.0.%parent: ichsmb0
dev.smb.0.%desc: SMBus generic I/O
dev.smb.0.%driver: smb
dev.smb.0.%parent: smbus0
* pciconf
-----------------------------
pciconf -lv
...
ichsmb0(at)pci0:31:3: class=0x0c0500 card=0x34448086 chip=0x266a8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW SMBus Controller'
class = serial bus
subclass = SMBus
...
-----------------------------
Viele Grüße
Nicola
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Fri 04 Aug 2006 - 14:41:54 CEST