Re: nach buildkernel kein x mehr

Bernd Walter schrieb:

>On Sun, Mar 06, 2005 at 11:56:58AM +0100, Daniel Graupner wrote:
>
>
>Was heißt für dich neu gebaut?
>
>
make buildkernel && make installkernel
(mit entsprechender KERNCONF)

>Mit gleichen Sourcen wie vorher?
>
>
RELENG_5 von heute mittag

>>und danach startet mein X nur noch mit 640x480 Auflösung statt mit 1024x....
>>Beim start von x kommt folgender Fehler:
>>(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
>>
>>Wenn ich vor dem Update ein dmesg|grep agp gemacht habe
>>
>>agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0xc000-0xc007 mem 0xfaf80000-0xfaffffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0
>>agp0: detected 892k stolen memory
>>agp0: aperture size is 128M
>>
>>Und jetzt werden mir keine Zeilen mehr gegrept,das Device is einfach
>>nciht mehr da...obwohl ich im Kernel das device agp mit angegeben habe.
>>Ich versteh das nicht...
>>
>>
>
>
>
das sagt pciconf...die KArte ist also noch da 8-)
acpi_video0(at)pci0:2:0: class=0x030000 card=0x01641028 chip=0x35828086
rev=0x02 hd
r=0x00
    vendor = 'Intel Corporation'
    device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated
Graphics Device'
    class = display
    subclass = VGA
acpi_video1(at)pci0:2:1: class=0x038000 card=0x01641028 chip=0x35828086
rev=0x02 hd
r=0x00
    vendor = 'Intel Corporation'
    device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated
Graphics Device'
    class = display

>boot -v Ausgabe?
>Die AGP Bridge wird ja letzlich physikalisch immer noch da sein.
>
>
Ich habe den recht langen output von boot -v mal angehängt. Ich erzähl
mal noch kurz warum ich den KErn neu gebaut habe.
Auf der freebas-acpi Liste hatte ich das Problem mit nicht
funktionierenden sleep-states angesprochen, da hatten sich dann auch
noch andere gemeldet, Ulrich Spörlein hatte die Codezeile identifiziert
die zum Fehler führte. Ich habe vor diese Zeile einfach mal einfach eine
Endlosschleife gepackt um zu sehen das der bis dahin kommt. (also die
Aussage für mich zu verifizieren) Also hab ich den KErn neu gebaut und
ich konnte die Beobachtung bestätigen. Da ich faul bin hab ich die
Änderung danach einfach von nem cvsup wieder wegbügeln lassen und hab
den kern neu gebaut....danach der Fehler.
Ich glaube aber nicht das es was damit zu tun hat....

Grüße, Daniel.

Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a4a430.
Calibrating clock(s) ... i8254 clock: 1193090 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1698564798 Hz
CPU: Intel(R) Pentium(R) M processor 1.70GHz (1698.56-MHz 686-class CPU)
  Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
 
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLF
LUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 535470080 (510 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f57ffff, 513126400 bytes (125275 pages)
avail memory = 514314240 (490 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc96e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000eac4
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fc590
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15
embedded 1 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 1 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 1 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 8 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 8 1 B 0x63 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
atpic: Programming IRQ9 as level/low
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x8e0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq 0: [ 5 7] 0+ low,level,sharable 0.31.1
\\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 11+ low,level,sharable 0.31.2
\\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 0.31.3
\\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 11+ low,level,sharable 0.29.2
\\_SB_.PCI0.LNKH irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+
low,level,sharable
 0.29.3
\\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.2.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3580, revid=0x02
        bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3584, revid=0x02
        bus=0, slot=0, func=1
        class=08-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3585, revid=0x02
        bus=0, slot=0, func=3
        class=08-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type 3, range 32, base f0000000, size 27, enabled
        map[14]: type 1, range 32, base faf80000, size 19, enabled
        map[18]: type 4, range 32, base 0000c000, size 3, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LNKA)
pcib0: possible interrupts: 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKH (references 1, priority 11410):
        interrupts: 11 10 5 9 12 6 4
3 7
15 14
        penalty: 80 80 90 160 5010 5010 5010
5010 5040 500
10 50010
\\_SB_.PCI0.LNKB (references 1, priority 2565):
        interrupts: 5 7
        penalty: 90 5040
\\_SB_.PCI0.LNKD (references 2, priority 2180):
        interrupts: 11 10 5 9 7
        penalty: 80 80 90 160 5040
\\_SB_.PCI0.LNKA (references 3, priority 320):
        interrupts: 11 10 9
        penalty: 80 80 160
\\_SB_.PCI0.LNKC (references 2, priority 213):
        interrupts: 11 10 9
        penalty: 80 80 160
pcib0: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found-> vendor=0x8086, dev=0x3582, revid=0x02
        bus=0, slot=2, func=0
        class=03-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 1 supports D0 D1 D3 current D0
        map[10]: type 3, range 32, base e8000000, size 27, enabled
        map[14]: type 1, range 32, base faf00000, size 19, enabled
found-> vendor=0x8086, dev=0x3582, revid=0x02
        bus=0, slot=2, func=1
        class=03-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 1 supports D0 D1 D3 current D0
        map[20]: type 4, range 32, base 0000bf80, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 29 INTA is already routed to irq 11
found-> vendor=0x8086, dev=0x24c2, revid=0x01
        bus=0, slot=29, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        map[20]: type 4, range 32, base 0000bf40, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD)
pcib0: possible interrupts: 5 7 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKH (references 1, priority 11454):
        interrupts: 5 10 11 9 12 6 4
3 7
15 14
        penalty: 130 160 190 320 5020 5020 5020
5020 5080 500
20 50020
\\_SB_.PCI0.LNKB (references 1, priority 2605):
        interrupts: 5 7
        penalty: 130 5080
\\_SB_.PCI0.LNKD (references 2, priority 2352):
        interrupts: 5 10 11 9 7
        penalty: 130 160 190 320 5080
\\_SB_.PCI0.LNKC (references 2, priority 446):
        interrupts: 10 11 9
        penalty: 160 190 320
pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x8086, dev=0x24c4, revid=0x01
        bus=0, slot=29, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
        map[20]: type 4, range 32, base 0000bf20, size 5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC)
pcib0: possible interrupts: 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKH (references 1, priority 11498):
        interrupts: 5 10 11 9 12 6 4
3 7
15 14
        penalty: 170 240 290 480 5030 5030 5030
5030 5120 500
30 50030
\\_SB_.PCI0.LNKB (references 1, priority 2645):
        interrupts: 5 7
        penalty: 170 5120
\\_SB_.PCI0.LNKC (references 2, priority 673):
        interrupts: 10 11 9
        penalty: 240 290 480
pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC
found-> vendor=0x8086, dev=0x24c7, revid=0x01
        bus=0, slot=29, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=11
        map[10]: type 1, range 32, base faeffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LNKH)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKH (references 1, priority 11541):
        interrupts: 5 10 11 9 12 6 4
3 7
15 14
        penalty: 210 320 390 640 5040 5040 5040
5040 5160 500
40 50040
\\_SB_.PCI0.LNKB (references 1, priority 2685):
        interrupts: 5 7
        penalty: 210 5160
pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LNKH
found-> vendor=0x8086, dev=0x24cd, revid=0x01
        bus=0, slot=29, func=7
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=11
        powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x2448, revid=0x81
        bus=0, slot=30, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24cc, revid=0x01
        bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
found-> vendor=0x8086, dev=0x24ca, revid=0x01
        bus=0, slot=31, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        map[10]: type 4, range 32, base 0000d800, size 8, enabled
        map[14]: type 4, range 32, base 0000dc40, size 6, enabled
        map[18]: type 1, range 32, base faeff800, size 9, enabled
        map[1c]: type 1, range 32, base faeff400, size 8, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB)
pcib0: possible interrupts: 5 7
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKB (references 1, priority 2725):
        interrupts: 5 7
        penalty: 250 5200
atpic: Programming IRQ5 as level/low
pcib0: slot 31 INTB routed to irq 5 via \\_SB_.PCI0.LNKB
found-> vendor=0x8086, dev=0x24c5, revid=0x01
        bus=0, slot=31, func=5
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=5
        powerspec 2 supports D0 D3 current D0
        map[10]: type 4, range 32, base 0000d400, size 8, enabled
        map[14]: type 4, range 32, base 0000d080, size 7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB)
pcib0: slot 31 INTB is already routed to irq 5
found-> vendor=0x8086, dev=0x24c6, revid=0x01
        bus=0, slot=31, func=6
        class=07-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=5
        powerspec 2 supports D0 D3 current D0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
acpi_video0: <ACPI video extension> port 0xc000-0xc007 mem
0xfaf80000-0xfaffffff,0
xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0
found TV(200), detectable by BIOS, head #0
found CRT monitor(100), detectable by BIOS, head #0
found unknown output(400), detectable by BIOS, head #0
found unknown output(300), detectable by BIOS, head #0
acpi_video1: <ACPI video extension> mem
0xfaf00000-0xfaf7ffff,0xe8000000-0xeffffff
f at device 2.1 on pci0
evaluation of \\_SB_.PCI0.VID2._DOD makes no sense
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f
irq 11 at de
vice 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f
irq 11 at de
vice 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f
irq 11 at de
vice 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfc000000-0xfdffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: Subtractively decoded bridge.
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq*11: [ 9 10 11] 11+ low,level,sharable 1.1.0
\\_SB_.PCI0.LNKD irq*11: [ 5 7 9 10 11] 11+ low,level,sharable 1.1.1
\\_SB_.PCI0.LNKB irq* 5: [ 5 7] 0+ low,level,sharable 1.3.0
\\_SB_.PCI0.LNKD irq*11: [ 5 7 9 10 11] 11+ low,level,sharable 1.3.1
\\_SB_.PCI0.LNKE irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+
low,level,sharable
 1.8.0
\\_SB_.PCI0.LNKB irq* 5: [ 5 7] 0+ low,level,sharable 1.8.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
        map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x104c, dev=0xac44, revid=0x02
        bus=1, slot=1, func=0
        class=06-07-00, hdrtype=0x02, mfdev=1
        cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07
(1750 ns)
        intpin=a, irq=255
        powerspec 2 supports D0 D1 D2 D3 current D0
        map[10]: type 1, range 32, base fcfff800, size 11, enabled
pcib1: device (null) requested decoded memory range 0xfcfff800-0xfcffffff
        map[14]: type 1, range 32, base fcff8000, size 14, enabled
pcib1: device (null) requested decoded memory range 0xfcff8000-0xfcffbfff
pcib1: matched entry for 1.1.INTB (src \\_SB_.PCI0.LNKD)
pcib1: slot 1 INTB is already routed to irq 11
found-> vendor=0x104c, dev=0x8029, revid=0x00
        bus=1, slot=1, func=1
        class=0c-00-10, hdrtype=0x00, mfdev=1
        cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
        intpin=b, irq=11
        powerspec 2 supports D0 D1 D2 D3 current D0
        map[10]: type 1, range 32, base fcffe000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xfcffe000-0xfcffefff
pcib1: matched entry for 1.3.INTA (src \\_SB_.PCI0.LNKB)
pcib1: slot 3 INTA is already routed to irq 5
found-> vendor=0x8086, dev=0x1043, revid=0x04
        bus=1, slot=3, func=0
        class=02-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns)
        intpin=a, irq=5
        powerspec 2 supports D0 D3 current D0
        map[10]: type 1, range 32, base fcffd000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xfcffd000-0xfcffdfff
        map[14]: type 4, range 32, base 0000ecc0, size 6, enabled
pcib1: device (null) requested decoded I/O range 0xecc0-0xecff
pcib1: matched entry for 1.8.INTA (src \\_SB_.PCI0.LNKE)
pcib1: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKE (references 1, priority 11636):
        interrupts: 5 10 11 9 12 6 4
3 7
15 14
        penalty: 360 480 560 880 5070 5070 5070
5070 5300 500
70 50070
pcib1: slot 8 INTA routed to irq 11 via \\_SB_.PCI0.LNKE
found-> vendor=0x8086, dev=0x103d, revid=0x81
        bus=1, slot=8, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38
(14000 ns)
        intpin=a, irq=11
        powerspec 2 supports D0 D1 D2 D3 current D0
cbb0: <TI4510 PCI-CardBus Bridge> at device 1.0 on pci1
pcib1: device cbb0 requested decoded memory range 0xfc000000-0xfdffffff
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xfc000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: matched entry for 1.1.INTA (src \\_SB_.PCI0.LNKA)
pcib1: slot 1 INTA is already routed to irq 11
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac44104c 0x02100007 0x06070002 0x00822008
  0x10: 0xfc000000 0x020000a0 0x20030201 0xfffff000
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
  0x40: 0x01641028 0x00000001 0x00000000 0x00000000
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000
  0x80: 0x08405061 0x00000000 0x001f0000 0x012c1222
  0x90: 0x606482c0 0x00000000 0x00000000 0x00000000
  0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: vendor=104c, dev=8029
fwohci0: <1394 Open Host Controller Interface> mem
0xfcff8000-0xfcffbfff,0xfcfff80
0-0xfcffffff irq 11 at device 1.1 on pci1
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfcfff800
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 33:4f:c0:00:02:8c:a0:30
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:8c:a0:30
fwe0: bpf attached
fwe0: Ethernet address: 32:4f:c0:8c:a0:30
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci1: <network> at device 3.0 (no driver attached)
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xecc0-0xecff mem
0xfcffd000
-0xfcffdfff irq 11 at device 8.0 on pci1
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfcffd000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 103d 1028 2002 0081
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:0f:1f:c2:08:a9
fxp0: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f
6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pcm0: <Intel ICH4 (82801DB)> port 0xdc40-0xdc7f,0xd800-0xd8ff mem
0xfaeff400-0xfae
ff4ff,0xfaeff800-0xfaeff9ff irq 5 at device 31.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800
pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc40
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)>
pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master
volume, Sigma
Tel 3D Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1,
AMAP, reserve
d 4
pcm0: sndbuf_setmap 1eff2000, 4000; 0xd5605000 -> 1eff2000
pcm0: sndbuf_setmap 1efee000, 4000; 0xd5609000 -> 1efee000
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0xa01 0xa11 0xa01 0xa01
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq
1 on acpi
0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem
0xcf800-0xcffff,0xcf000-0xcf7ff,0xce800-0xcefff,0
xce000-0xce7ff,0xcd800-0xcdfff,0xc0000-0xcd7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xa01 0xa01 0xa01 0xa01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1698564798 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH4 chip
ata0-master: setting UDMA100 on Intel ICH4 chip
ad0: <HTS548040M9AT00/MG2OA53A> ATA-6 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:20482812
[1] f:80 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:20482875 l:20466810
[2] f:00 typ:12 s(CHS):1023/0/1 e(CHS):1023/254/63 s:40949685 l:37174410
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 10487199744 end 10487231999
GEOM: Configure ad0s2, start 10487232000 length 10479006720 end 20966238719
GEOM: Configure ad0s3, start 20966238720 length 19033297920 end 39999536639
ata1-master: setting PIO4 on Intel ICH4 chip
[0] f:69 typ:107 s(CHS):288/115/52 e(CHS):368/111/45 s:1768778098 l:7631461
[1] f:0d typ:117 s(CHS):357/10/14 e(CHS):353/115/52 s:1830843506
l:1394635881
[2] f:74 typ:65 s(CHS):299/114/39 e(CHS):299/108/52 s:1718906437 l:2573
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:-1467809792 l:52918
ata1-master: setting UDMA33 on Intel ICH4 chip
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad0s2a, start 0 length 1048576000 end 1048575999
GEOM: Configure ad0s2b, start 1048576000 length 524288000 end 1572863999
GEOM: Configure ad0s2c, start 0 length 10479006720 end 10479006719
GEOM: Configure ad0s2d, start 1572864000 length 314572800 end 1887436799
GEOM: Configure ad0s2e, start 1887436800 length 524288000 end 2411724799
GEOM: Configure ad0s2f, start 2411724800 length 8067281920 end 10479006719
[0] f:65 typ:110 s(CHS):357/114/46 e(CHS):10/255/13 s:1768187213
l:1701211749
[1] f:68 typ:255 s(CHS):370/108/37 e(CHS):78/13/10 s:1953723749 l:980709985
[2] f:20 typ:116 s(CHS):371/84/33 e(CHS):100/101/32 s:1801683314 l:168652389
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:-1409286144 l:54212
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
acd0: <NEC DVD+RW ND-6100A/104D> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer,
UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 48016 Hz, will use 48000 Hz
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 6
(probe2:ata1:0:0:0): Unretryable Error
(probe8:sbp0:0:4:0): error 22
(probe8:sbp0:0:4:0): Unretryable Error
(probe9:sbp0:0:5:0): error 22
(probe9:sbp0:0:5:0): Unretryable Error
(probe10:sbp0:0:6:0): error 22
(probe10:sbp0:0:6:0): Unretryable Error
(probe4:sbp0:0:0:0): error 22
(probe4:sbp0:0:0:0): Unretryable Error
(probe5:sbp0:0:1:0): error 22
(probe5:sbp0:0:1:0): Unretryable Error
(probe6:sbp0:0:2:0): error 22
(probe6:sbp0:0:2:0): Unretryable Error
(probe7:sbp0:0:3:0): error 22
(probe7:sbp0:0:3:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <_NEC DVD+RW ND-6100A 104D> Removable CD-ROM SCSI-0 device
pass0: Serial Number [
pass0: 33.000MB/s transfers
GEOM: new disk cd0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD+RW ND-6100A 104D> Removable CD-ROM SCSI-0 device
cd0: Serial Number [
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Sun 06 Mar 2005 - 14:09:32 CET