Mylex <-> IBM RAID

Hallo,

mir sind heute 2 Mylex zugeflogen die sich beim booten als IBM Controller
entpuppen:

IBM RAID Adapter BIOS Version 1.29 - 21 Dec 95

Drive in channel 2 bay 1 does not respond

RAID Firmware 2.43
Installation stopped
Press any kex to continue

So, nun habe ich mir gedacht "schoen und gut, neue RAID config basteln".
Von ICP Controllern kenne ich eine Menuegesteuerte Konfiguration...
Scheint der Mylex wohl nicht zu haben?

Wie kann ich da jetzt ein RAID-1 bestehend aus 2 Platten konfigurieren?
Bzw. fals noetig, kann ich dort einfach eine Mylex-Firmware rueberknallen?
Weiss leider nicht, was IBM da rumgefummelt hat. (FRU Nummer ist 06H5078)

Unter FreeBSD schaut es leider nicht so toll aus:

mlx0: <Mylex version 2 RAID interface> port 0xe000-0xe07f mem
      0xdf800000-0xdf80007f irq 11 at device 12.0 on pci0
mlx0: DAC960P/PD, 2 channels, firmware 2.43-0-00, 4MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 2150MB (4403200 sectors) RAID 7 (offline)
GEOM: create disk mlxd0 dp=0xc1210f0c

test# mlxcontrol status
mlx0: DAC960P/PD, 2 channels, firmware 0.00--00, 4MB RAM
mlxd0: offline
test#

test# mlxcontrol rescan mlx0
mlxd1: <Mylex System Drive> on mlx0
mlxd1: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd1 dp=0xc1c3b40c
mlxd2: <Mylex System Drive> on mlx0
mlxd2: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd2 dp=0xc1c3b50c
mlxd3: <Mylex System Drive> on mlx0
mlxd3: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd3 dp=0xc1c3b58c
mlxd4: <Mylex System Drive> on mlx0
mlxd4: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd4 dp=0xc1c3b70c
mlxd5: <Mylex System Drive> on mlx0
mlxd5: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd5 dp=0xc1c3b80c
mlxd6: <Mylex System Drive> on mlx0
mlxd6: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd6 dp=0xc1c3b90c
mlxd7: <Mylex System Drive> on mlx0
mlxd7: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd7 dp=0xc1c3ba0c
mlxd8: <Mylex System Drive> on mlx0
mlxd8: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd8 dp=0xc1c3bb0c
mlxd9: <Mylex System Drive> on mlx0
mlxd9: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd9 dp=0xc1c3bc8c
mlxd10: <Mylex System Drive> on mlx0
mlxd10: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd10 dp=0xc1c44d0c
mlxd11: <Mylex System Drive> on mlx0
mlxd11: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd11 dp=0xc1c44c0c
mlxd12: <Mylex System Drive> on mlx0
mlxd12: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd12 dp=0xc1c44b0c
mlxd13: <Mylex System Drive> on mlx0
mlxd13: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd13 dp=0xc1c44a8c
mlxd14: <Mylex System Drive> on mlx0
mlxd14: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd14 dp=0xc1c4498c
mlxd15: <Mylex System Drive> on mlx0
mlxd15: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd15 dp=0xc1c4488c
mlxd16: <Mylex System Drive> on mlx0
mlxd16: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd16 dp=0xc1abc48c
mlxd17: <Mylex System Drive> on mlx0
mlxd17: 524288MB (1073742379 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd17 dp=0xc1abdd8c
mlxd18: <Mylex System Drive> on mlx0
mlxd18: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd18 dp=0xc1c4470c
mlxd19: <Mylex System Drive> on mlx0
mlxd19: 8192MB (16777216 sectors) RAID 15 (offline)
GEOM: create disk mlxd19 dp=0xc1c4460c
mlxd20: <Mylex System Drive> on mlx0
mlxd20: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd20 dp=0xc1c4450c
mlxd21: <Mylex System Drive> on mlx0
mlxd21: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd21 dp=0xc1c4438c
mlxd22: <Mylex System Drive> on mlx0
mlxd22: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd22 dp=0xc1c4428c
mlxd23: <Mylex System Drive> on mlx0
mlxd23: 1MB (2065 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd23 dp=0xc1c4418c
mlxd24: <Mylex System Drive> on mlx0
mlxd24: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd24 dp=0xc1c4408c
mlxd25: <Mylex System Drive> on mlx0
mlxd25: 0MB (0 sectors) RAID 4 (unknown state)
GEOM: create disk mlxd25 dp=0xc1c4808c
mlxd26: <Mylex System Drive> on mlx0
mlxd26: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd26 dp=0xc1c47f0c
mlxd27: <Mylex System Drive> on mlx0
mlxd27: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd27 dp=0xc1c47e0c
mlxd28: <Mylex System Drive> on mlx0
mlxd28: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd28 dp=0xc1c47d0c
mlxd29: <Mylex System Drive> on mlx0
mlxd29: 66098MB (135368948 sectors) RAID 4 (unknown state)
GEOM: create disk mlxd29 dp=0xc1c47b8c
mlxd30: <Mylex System Drive> on mlx0
mlxd30: 0MB (0 sectors) RAID 0 (unknown state)
GEOM: create disk mlxd30 dp=0xc1c47a8c
mlxd31: <Mylex System Drive> on mlx0
mlxd31: 66098MB (135368964 sectors) RAID 4 (unknown state)
GEOM: create disk mlxd31 dp=0xc1c4798c
mlx0: background check/rebuild operation started
mlxd17: drive offline
mlxd23: drive offline
mlxd29: drive offline
mlxd31: drive offline
mlx0: background check/rebuild operation completed

test# mlxcontrol detach -a

test# mlxcontrol rescan mlx0
mlx0: background check/rebuild operation started
mlx0: background check/rebuild operation completed

test# mlxcontrol config mlx0
mlx0: error submitting READ CONFIGURATION

test# mlxcontrol status
mlx0: DAC960P/PD, 2 channels, firmware 0.00--00, 4MB RAM
<---- hier haengt er ---->

Wie bekomm ich das Schaetzchen zum laufen?

-- 
 Oliver Lehmann
  http://www.pofo.de/
  http://wishlist.ans-netz.de/
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message