On Thu, Apr 01, 2004 at 11:32:42AM +0200, Bernd Walter wrote:
> FreeBSD hat für Massenspeicher den umass Treiber, der alle Geräte
> übernehmen sollte, welche nach dem umass Standart geschrieben sind.
> Hast du den Treiber im kernel?
im Kernel is alles drin. Der übliche CompactFlash 'Rödel' läuft.
> Erst mal sollte man wissen als was sich das Teil überhaupt melded.
> Wenn er sich mit einem Herstellerspezifischen Protokoll melded,
> dann musst du den Hersteller fragen.
> http://www.cosmo-project.de/~bernd/usbutil.tgz liefert die ein port
> Gerüst für diverese usbtools.
> usbctl davon gibt dir ganzen Geräteparameter aus.
jau. herzlichen.
Ausgabe von usbctl
---- snip ---
----------
DEVICE addr 3
DEVICE descriptor:
bLength=18 bDescriptorType=device(1) bcdUSB=1.10 bDeviceClass=0
bDeviceSubClass=0
bDeviceProtocol=0 bMaxPacketSize=16 idVendor=0x0aa9 idProduct=0xf103
bcdDevice=100
iManufacturer=0() iProduct=0() iSerialNumber=0() bNumConfigurations=1
CONFIGURATION descriptor 0:
bLength=9 bDescriptorType=config(2) wTotalLength=39 bNumInterface=1
bConfigurationValue=1 iConfiguration=0() bmAttributes=c0 bMaxPower=100
mA
INTERFACE descriptor 0:
bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0
bAlternateSetting=0
bNumEndpoints=3 bInterfaceClass=255 bInterfaceSubClass=255
bInterfaceProtocol=255 iInterface=0()
ENDPOINT descriptor:
bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-out
bmAttributes=bulk wMaxPacketSize=8 bInterval=0
ENDPOINT descriptor:
bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=2-out
bmAttributes=bulk wMaxPacketSize=64 bInterval=0
ENDPOINT descriptor:
bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=3-in
bmAttributes=bulk wMaxPacketSize=64 bInterval=0
--- snap ---
Das sieht also m.E. (ich bin kein Programmierer) sehr düster aus was die
INformationen angeht.
tigger# /usr/local/sbin/usbgen -f ugen0 -v -D
bringt:
--- snip ---
Dumping all descriptors
DEVICE descriptor:
bLength=18 bDescriptorType=1 bcdUSB=1.10 bDeviceClass=0
bDeviceSubClass=0
bDeviceProtocol=0 bMaxPacketSize=16
idVendor=0x0aa9 idProduct=0xf103 bcdDevice=100
iManufacturer=0 iProduct=0 iSerialNumber=0 bNumConfigurations=1
usbgen: ioctl USB_GET_CONFIG: Input/output error
--- snap --
--- GreetZ from EastFrisia K.André Braselmann seeheader4details --- To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org with "unsubscribe de-bsd-questions" in the body of the messageReceived on Thu 01 Apr 2004 - 13:54:11 CEST