Re: FBSD 5, reichlich Bugs in Ports

From: Klaus Engelbertz <klaus.engelbertz(at)marbella-compudata.net>
Date: Mon, 26 May 2003 23:52:40 +0200

> Machst Du bitte hier (gescripted) nochmal ein
> # df -hi
> # mount
> # cat /var/run/dmesg.boot
> # pkg_version -v
> # cat /etc/make.conf
> # env
> # echo $0

Script started on Mon May 26 23:43:01 2003
You have mail.
gateway# df -hi
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/ad0s1a 504M 78M 385M 17% 1418 64628 2% /
devfs 1.0K 1.0K 0B 100% 0 0 100% /dev
/dev/ad0s1d 18G 12G 4.5G 73% 140836 2261466 6% /usr
gateway# moiuunt
/dev/ad0s1a on / (ufs, local)
devfs on /dev (devfs, local)
/dev/ad0s1d on /usr (ufs, local, noatime, soft-updates)
gateway# cat /var/run/dmesg.boot
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE-p7 #1: Mon Apr 14 17:43:49 CEST 2003

engelber(at)gateway.w1.marbella-compudata.net:/usr/src/sys/i386/compile/gateway
Preloaded elf kernel "/boot/kernel/kernel" at 0xc064f000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 350797592 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU)
  Origin = "GenuineIntel" Id = 0x652 Stepping = 2

Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
real memory = 402653184 (384 MB)
avail memory = 384352256 (366 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 6 entries at 0xc00fdc30
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on
motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff
at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <display, VGA> at device 9.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xe400-0xe43f mem
0xeb000000-0xeb0fffff,0xeb101000-0xeb101fff irq 12 at device 10.0 on pci0
fxp0: Ethernet address 00:d0:b7:6a:e3:1f
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe800-0xe87f mem
0xeb100000-0xeb10007f irq 11 at device 12.0 on pci0
xl0: Ethernet address: 00:10:5a:cf:6c:07
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounters tick every 10.000 msec
DUMMYNET initialized (011031)
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to
accept, logging unlimited
BRIDGE 020214 loaded
ad0: 19574MB <WDC WD205BA> [39770/16/63] at ata0-master UDMA33
acd0: CDROM <SAMSUNG CD-ROM SC-148F> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
gateway# pkg_version -v
autoconf-2.53_1 = up-to-date with port
bash-2.05b.004 < needs updating (port has 2.05b.007)
cvsup-without-gui-16.1f < needs updating (port has 16.1h)
expat-1.95.5 < needs updating (port has 1.95.6_1)
ezm3-1.0 < needs updating (port has 1.1)
fetchmail-6.2.0 = up-to-date with port
gettext-0.11.5_1 = up-to-date with port
gmake-3.80 = up-to-date with port
help2man-1.29 = up-to-date with port
libiconv-1.8_2 = up-to-date with port
libtool-1.3.4_4 = up-to-date with port
linux_base-6.1_4 < needs updating (port has 6.1_5)
m4-1.4_1 = up-to-date with port
nmap-3.27 = up-to-date with port
p5-DBD-SQLite-0.25 = up-to-date with port
p5-DBI-1.34_1 < needs updating (port has 1.37)
p5-Mail-RBL-1.00 = up-to-date with port
p5-Storable-2.06 = up-to-date with port
p5-String-Approx-3.19 = up-to-date with port
p5-Term-ReadKey-2.21 = up-to-date with port
p5-Term-Size-0.2 = up-to-date with port
p5-Text-FormatTable-1.00 = up-to-date with port
p5-Text-Template-1.43 < needs updating (port has 1.44)
perl-5.6.1_11 < needs updating (port has 5.6.1_13)
qpopper-2.53_4 = up-to-date with port
wget-1.8.2_3 = up-to-date with port
gateway# cat /etc/make.conf
# -- use.perl generated deltas -- #
# Created: Thu Jan 1 00:14:58 1998
# Setting to use base perl from ports:
PERL_VER=5.6.1
PERL_VERSION=5.6.1
PERL_ARCH=mach
NOPERL=yo
NO_PERL=yo
NO_PERL_WRAPPER=yo

gateway# env
SSH_CLIENT=192.168.0.96 2317 22
USER=engelber
MAIL=/var/mail/engelber
HOME=/root
SSH_TTY=/dev/ttyp2
PAGER=more
ENV=/home/engelber/.shrc
LOGNAME=engelber
BLOCKSIZE=K
TERM=xterm
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin
:/usr/X11R6/bin:/root/bin
SHELL=/bin/csh
SSH_CONNECTION=192.168.0.96 2317 192.168.0.250 22
FTP_PASSIVE_MODE=YES
EDITOR=vi
HOSTTYPE=FreeBSD
VENDOR=intel
OSTYPE=FreeBSD
MACHTYPE=i386
SHLVL=2
PWD=/root
GROUP=wheel
HOST=gateway.w1.marbella-compudata.net
REMOTEHOST=192.168.0.96
gateway#

> Stellst Du bitte sicher, world und kernel synchron zu haben?

Natuerlich

> Weil, mein Testsystem baut procmail und lynx vernünftig. Und bei meinen
> Eltern steht ein DSL-Router mit 5.0-p7 mit lynx (für mich zum schnell
> gucken), und da gab's auch keine Probleme.
>
> Sende bitte alle bei allen Fehlermeldungen in diesem Thread den
> kompletten Ablauf per script(1). Ich tippe nämlich noch im Dunkeln und
> hoffe, etwas verdächtiges in deinen Logs zu finden.
>
> Und nochwas: Im Abendland liest man von oben nach unten, also schreib
> bitte Deine Antworten unter meine Fragen, und nicht drüber. Liest sich
> schlecht und kostet Zeit und Nerven beim Verstehen.

Sorry, werd ich tun :-)
Hab ich eine Antwort ueber Deine Frage....? :-)
Liegt bestimmt an diesem komischen Outlook :-)

Gruss

Klaus

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Mon 26 May 2003 - 23:52:44 CEST

search this site