Jens Rehsack wrote:
<snip>
>>ehm, was soll ich denn da wie dumpen??
>>
>>
>
>Kann ich so auch noch nicht sagen, schick' mal die Ausgabe von 'ifconfig
>-a' (bei aktivem DSL).
>
>
>
Bitteschoen:
-bash-2.05b$ ifconfig -a
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::230:84ff:fe28:e62f%rl0 prefixlen 64 scopeid 0x1
ether 00:30:84:28:e6:2f
media: Ethernet autoselect (10baseT/UTP)
status: active
de0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.150 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::280:c8ff:fe7f:6867%de0 prefixlen 64 scopeid 0x2
ether 00:80:c8:7f:68:67
media: Ethernet autoselect (10base2/BNC)
status: active
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
inet 217.237.115.39 --> 217.5.98.36 netmask 0xffffffff
Opened by PID 108
tun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
Opened by PID 178
Ich habe schonmal versucht
tcpdump -i tun0 | grep "session"
laufen zu lassen aber das wars nicht ... (bitte nicht schlagen ich hab
keine Erfahrung mit tcpdump ...)
Da ist mir aber gerade doch noch was aufgefallen ... ich habe da
irgendwie den pppd zweimal am Laufen:
-bash-2.05b$ ps uax | grep ppp
tom 11171 0.0 0.9 1064 504 p5 S+ 4:23PM 0:00.01 grep ppp
root 108 0.0 1.6 2552 928 ?? Ss Thu02PM 57:43.92 ppp -ddial
-nat
root 178 0.0 1.1 2408 648 ?? Is Thu02PM 1:07.67 ppp -ddial
-nat
Das kann doch auch nicht sein, oder??? Der zweite (PID 178) scheint den
tun1 zu benutzen, aber den gibts gar nicht ...
Gruss,
Tom
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Mon 26 May 2003 - 16:10:33 CEST