USB 2.0 für -current - wer hat Hardware?

Ich habe gerade eben einen EHCI Controller unter -current zu laufen
bekommen.
Hat mich gestört, daß beim booten Hardware ignoriert wurde :-)
Leider mangelt es mir an weiterer USB 2.0 Hardware zum testen.
Wenn mir jemand Hardware zur Verfügung stellen kann oder selber
testen will möchte sich bitte bei mir melden.

[...]
ohci2: <NEC uPD 9210 USB controller> mem 0xe0003000-0xe0003fff irq 5 at device 12.0 on pci0
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ohci3: <NEC uPD 9210 USB controller> mem 0xe0004000-0xe0004fff irq 9 at device 12.1 on pci0
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci3
usb3: USB revision 1.0
uhub4: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5: Motorola MC141555 hub controller, class 9/0, rev 1.00/1.00, addr 2
uhub5: 4 ports with 4 removable, bus powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xe0005000-0xe00050ff irq 12 at device 12.2 on pci0
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 0.95
usb4: companion controllers, 3 ports each: usb2 usb3
usb4: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub6: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 5 ports with 5 removable, self powered
[...]

[47]cicely13# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), OPTi(0x0000), rev 1.00
 port 1 addr 2: full speed, power 100 mA, config 1, Travel Flash(0x1307), PQI(0x0483), rev 2.05
 port 2 addr 3: full speed, power 98 mA, config 1, product 0x0002(0x0002), vendor 0x3980(0x3980), rev 0.06
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), OPTi(0x0000), rev 1.00
 port 1 powered
 port 2 addr 2: full speed, self powered, config 1, Standard USB Hub(0x3301), Atmel(0x03eb), rev 3.00
  port 1 powered
  port 2 powered
  port 3 powered
  port 4 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1.00
 port 1 powered
 port 2 addr 2: full speed, power 100 mA, config 1, MC141555 hub controller(0x1555), Motorola(0x1063), rev 1.00
  port 1 powered
  port 2 powered
  port 3 powered
  port 4 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), NEC(0x0000), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered

-- 
B.Walter                   BWCT                http://www.bwct.de
ticso(at)bwct.de                                  info(at)bwct.de
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message