Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
    000:  d1 0a ff
	Common memory device information:
		Device number 1, type Function specific, WPS = OFF
		Speed = 250nS, Memory block size = 8Kb, 2 units
Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
    000:  01 d1 0a ff
	(MWAIT)
Tuple #3, code = 0x17 (Attribute memory descriptor), length = 3
    000:  51 7a ff
	Attribute memory device information:
		Device number 1, type FLASH EEPROM, WPS = OFF
		Speed = 250nS, Memory block size = 8Kb, 16 units
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
    000:  49 01 65 02
	PCMCIA ID = 0x149, OEM ID = 0x265
Tuple #5, code = 0x21 (Functional ID), length = 2
    000:  06 01
	Network/LAN adapter - POST initialize
Tuple #6, code = 0x15 (Version 1 info), length = 38
    000:  04 01 44 2d 4c 69 6e 6b 00 44 45 2d 36 35 30 00
    010:  56 65 72 20 30 31 2e 30 30 00 ff 00 00 00 00 00
    020:  00 00 00 00 00 00
	Version = 4.1, Manuf = [D-Link], card vers = [DE-650]
	Addit. info = [Ver 01.00]
Tuple #7, code = 0x1a (Configuration map), length = 5
    000:  01 20 00 04 0b
	Reg len = 2, config register addr = 0x400, last config = 0x20
	Registers: XX-X---- 
Tuple #8, code = 0x1b (Configuration entry), length = 7
    000:  e0 81 18 45 30 fc be
	Config index = 0x20(default)
	Interface byte = 0x81 (I/O)  wait signal supported
	Card decodes 5 address lines, limited 8/16 Bit I/O
		IRQ modes: Level
		IRQs:  2 3 4 5 6 7 9 10 11 12 13 15
Tuple #9, code = 0x14 (No link), length = 0
Tuple #10, code = 0xff (Terminator), length = 0
2 slots found