Hallo Alle,
irgendwas mach' ich falsch bei meiner ISDN-Verbindung. Hier nur ein paar
kurze Ausschnitte aus den Logs:
---</var/log/messages>---
> Nov 7 18:01:25 kiste isdnd[328]: DMN init_controller_state:
controller 0 is ELSA QuickStep 1000pro/PCI
> Nov 7 18:04:05 kiste isdnd[328]: DMN i4b isdn daemon started (pid = 328)
> Nov 7 22:32:00 kiste ppp[593]: Warning: set phone: No context (use
the `link' command)
> Nov 7 22:32:00 kiste ppp[593]: Warning: set phone: Failed 1
---<//var/log/messages>---
---<ppp.log>---
> Nov 7 22:31:53 kiste ppp[593]: Phase: Using interface: tun0
> Nov 7 22:31:53 kiste ppp[593]: Phase: deflink: Created in closed state
> Nov 7 22:31:53 kiste ppp[593]: Phase: 1: Cloned in closed state
> Nov 7 22:31:53 kiste ppp[593]: Phase: 2: Cloned in closed state
> Nov 7 22:31:53 kiste ppp[593]: Phase: Listening at local socket
/tmp/ppp-isdn.
> Nov 7 22:31:53 kiste ppp[593]: Phase: PPP Started (interactive mode).
> Nov 7 22:32:00 kiste ppp[593]: Warning: set phone: No context (use
the `link' command)
> Nov 7 22:32:00 kiste ppp[593]: Warning: set phone: Failed 1
> Nov 7 22:32:00 kiste ppp[593]: Phase: bundle: Establish
> Nov 7 22:32:00 kiste ppp[593]: Phase: 1: closed -> opening
> Nov 7 22:32:00 kiste ppp[593]: Phase: 1: Connected!
> Nov 7 22:32:00 kiste ppp[593]: Phase: 1: opening -> dial
> Nov 7 22:32:00 kiste ppp[593]: Phase: 1: dial -> carrier
> Nov 7 22:32:06 kiste ppp[593]: Phase: 1: /dev/i4brbch0: No carrier
(increase ``set cd'' from 6 ?)
> Nov 7 22:32:06 kiste ppp[593]: Phase: 1: Disconnected!
> Nov 7 22:32:06 kiste ppp[593]: Phase: 1: carrier -> hangup
> Nov 7 22:32:06 kiste ppp[593]: Phase: 1: Connect time: 6 secs: 0
octets in, 0 octets out
> Nov 7 22:32:06 kiste ppp[593]: Phase: 1: : 0 packets in, 0 packets out
> Nov 7 22:32:06 kiste ppp[593]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Wed Nov 7 22:32:06 2001
> Nov 7 22:32:06 kiste ppp[593]: Phase: 1: hangup -> opening
> Nov 7 22:32:06 kiste ppp[593]: Phase: 1: Enter pause (3) for redialing.
[Mehrere Male wiederholt]
> Nov 7 22:32:37 kiste ppp[593]: Phase: 1: Connected!
> Nov 7 22:32:37 kiste ppp[593]: Phase: 1: opening -> dial
> Nov 7 22:32:37 kiste ppp[593]: Phase: 1: dial -> carrier
> Nov 7 22:32:43 kiste ppp[593]: Phase: 1: /dev/i4brbch0: No carrier
(increase ``set cd'' from 6 ?)
> Nov 7 22:32:43 kiste ppp[593]: Phase: 1: Disconnected!
> Nov 7 22:32:43 kiste ppp[593]: Phase: 1: carrier -> hangup
> Nov 7 22:32:43 kiste ppp[593]: Phase: 1: Connect time: 6 secs: 0
octets in, 0 octets out
> Nov 7 22:32:43 kiste ppp[593]: Phase: 1: : 0 packets in, 0 packets out
> Nov 7 22:32:43 kiste ppp[593]: Phase: total 0 bytes/sec, peak 0
bytes/sec on Wed Nov 7 22:32:43 2001
> Nov 7 22:32:43 kiste ppp[593]: Phase: 1: hangup -> opening
> Nov 7 22:32:43 kiste ppp[593]: Phase: 1: Enter pause (3) for redialing.
[Diese Fehlermeldung ist seltener.]
---</ppp.log>---
Hat jemand einen Tip, woran das liegen kann?
Danke
-Christoph Sold
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Wed 07 Nov 2001 - 23:40:43 CET