© 1995-2013 by The FreeBSD Project. All rights reserved.URL: http://lists.de.freebsd.org
Hallo zusammen,
ich habe kürzlich günstig ein altes Toshiba-Notebook (Satellite
Pro 400 CS) erstanden und habe darauf FreeBSD 4.0 installiert.
Läuft so weit auch ganz gut, nur bekomme ich die PCMCIA Netzwerkkarte
nicht ans laufen. Ich habe schon bei der Installation angegeben,
daß ich pccardd benutzen will. Entsprechend wurde die rc.conf
angepasst.
Auch die pccard.conf habe ich für meine Netzwerkkarte angepasst,
da kein Standard-Eintrag für meine Karte drin war. Die pccard.conf
habe ich mal angehängt.
Nach dem Booten sagt mir der pccardd folgendes:
"driver allocation failed for <Kartenname>: Device not configured.
Kann mir jemand sagen, wie das zu deuten ist ? Wie konfiguriere
ist das device ?
Vielleicht kann mir auch jemand mitteilen, wie man normalerweise
bei der Installation von PC-Cards vorgeht.
Ciao
Stefan
--
--- Communications powered by FreeBSD ---
Stefan Herrmann Löwenburgstr. 81
D-53229 Bonn
# Sample PCCARD configuration file
#
# Removing all IRQ conflicts from this file can't be done because of some
# IRQ-selfish PC-cards. So if you want to use some of these cards in
# your machine, you will be forced to modify their IRQ parameters from
# the following list.
#
# IRQ == 0 means "allocate free IRQ from IRQ pool"
# IRQ == 16 means "do not use IRQ (e.g. PIO mode)"
#
# $FreeBSD: src/etc/pccard.conf.sample,v 1.90 2000/03/11 20:23:34 imp Exp $
#
# Send new entries for this file to imp(at)freebsd.org. He's volunteered
# to act as coordinator for this file.
#
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 3 5 10 11 13 15
# Available memory slots
memory 0xd4000 96k
# Compu-Shack PCMCIA 10 MBit
card "COMPU-SHACK" "BASEline PCMCIA 10 MBit Ethernetadapter"
config 0x2 "ed0" ?
# ether 0x110 00:e0:98
# ether 0xff0 00:e0:98
insert logger -t pccard:$device -s COMPU-SHACK BASEline PCMCIA 10 MBit Ethernetadapter inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s COMPU-SHACK BASEline PCMCIA 10 MBit Ethernetadapter removed
remove /sbin/ifconfig $device delete
# 3Com/NoteWorthy 56K modem (bundled with Toshiba notebooks)
card "3Com" "U.S. Robotics 3056"
config 0x20 "sio1" ?
insert logger -t pccard:$device -s 3Com U.S. Robotics 3056 inserted
remove logger -t pccard:$device -s 3Com U.S. Robotics 3056 removed
# Aironet PC4500 2Mbps 802.11 wireless NIC
card "Aironet" "PC4500"
config 0x5 "an0" ?
insert logger -t pccard:$device -s Aironet PC4500 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Aironet PC4500 removed
remove /sbin/ifconfig $device delete
# Aironet PC4800 11Mbps 802.11 wireless NIC
card "Aironet" "PC4800"
config 0x5 "an0" ?
insert logger -t pccard:$device -s Aironet PC4800 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Aironet PC4800 removed
remove /sbin/ifconfig $device delete
# Lucent WaveLAN/IEEE
card "Lucent Technologies" "WaveLAN/IEEE"
config 0x1 "wi0" ?
insert logger -t pccard:$device -s WaveLAN/IEEE inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s WaveLAN/IEEE removed
remove /sbin/ifconfig $device delete
# NCR WaveLAN/IEEE
card "NCR" "WaveLAN/IEEE"
config 0x1 "wi0" ?
# config auto "wi0" ?
insert logger -t pccard:$device -s WaveLAN/IEEE inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s WaveLAN/IEEE removed
remove /sbin/ifconfig $device delete
# Cabletron RoamAbout, WaveLAN/IEEE clone
card "Cabletron" "RoamAbout 802.11 DS"
config 0x1 "wi0" ?
insert logger -t pccard:$device -s WaveLAN/IEEE inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s WaveLAN/IEEE removed
remove /sbin/ifconfig $device delete
# Socket LP-E (WinCE Low Power Ethernet)
card "Low Power Ethernet LAN Adapter" "Socket Communications, Inc"
config 0x20 "ed0" ?
insert logger -t pccard:$device -s Socket LP-E inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Socket LP-E removed
remove /etc/pccard_ether_remove $device
# CNet BC40 adapter
card "CNet" "CN40BC Ethernet"
config 0x20 "ed0" ?
insert logger -t pccard:$device -s CNet CN40BC Ethernet inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s CNet CN40BC Ethernet removed
remove /etc/pccard_ether_remove $device
# LinkMates LM 336 LAN Fax/Modem PC Card
card "PCMCIAs" "ComboCard"
config 0x24 "ed0" ? 0x10
insert logger -t pccard:$device -s LinkMates LM 336 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s LinkMates LM 336 removed
remove /sbin/ifconfig $device delete
# IBM PCMCIA Ethernet I/II
card "IBM Corp." "Ethernet"
config 0x1 "ed0" ?
ether 0xff0
insert logger -t pccard:$device -s IBM PCMCIA Ethernet inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s IBM PCMCIA Ethernet removed
remove /sbin/ifconfig $device delete
# Melco LPC-T (PIO mode)
card "PCMCIA" "UE2212"
config 0x1 "ed0" ? 0x10
ether 0xff0
insert logger -t pccard:$device -s UE2212 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s UE2212 removed
remove /sbin/ifconfig $device delete
# Billionton 10Base-TX ETHERNET PCCARD (aka UE2216)
card "PCMCIA" "PCMCIA-ETHERNET-CARD"
config 0x20 "ed0" ? 0x10
insert logger -t pccard:$device -s UE2216 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s UE2216 removed
remove /sbin/ifconfig $device delete
# Accton EN2212
# Very slow! (PIO mode)
card "ACCTON" "EN2212"
config 0x1 "ed0" ? 0x10
ether 0xff0
insert logger -t pccard:$device -s Accton EN2212 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Accton EN2212 removed
remove /sbin/ifconfig $device delete
#Accton 2216
card "ACCTON" "EN2216-PCMCIA-ETHERNET"
config 0x20 "ed0" ?
# config auto "ed0" ?
insert logger -t pccard:$device -s Accton 2216 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Accton 2216 removed
remove /sbin/ifconfig $device delete
# COREGA EtherII PCC-T
card "corega K.K." "corega EtherII PCC-T"
config 0x20 "ed0" ?
# config auto "ed0" ?
insert logger -t pccard:$device -s EtherII PCC-T inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s EtherII PCC-T removed
remove /sbin/ifconfig $device delete
# I-O DATA PCLATE
card "IO DATA" "PCLATE"
config 0x20 "ed0" ? 0x10
insert logger -t pccard:$device -s IO DATA PCLATE inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s IO DATA PCLATE removed
remove /sbin/ifconfig $device delete
# 3Com Etherlink III 3C589B, 3C589C
card "3Com Corporation" "3C589"
config 0x1 "ep0" ?
# config auto "ep0" ?
insert logger -t pccard:$device -s 3Com Etherlink III inserted
insert /etc/pccard_ether $device -link0 link1
# insert /etc/pccard_ether $device link0 -link1
remove logger -t pccard:$device -s 3Com Etherlink III removed
remove /sbin/ifconfig $device delete
# 3Com Etherlink III 3C589D
card "3Com Corporation" "3C589D"
config 0x1 "ep0" ?
# config auto "ep0" ?
insert logger -t pccard:$device -s 3Com Etherlink III inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s 3Com Etherlink III removed
remove /sbin/ifconfig $device delete
# 3Com Etherlink III 3CXE589ET
card "3Com" "Megahertz 589E"
config 0x1 "ep0" ?
insert logger -t pccard:$device -s 3Com 3C589E inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s 3Com 3C589E removed
remove /sbin/ifconfig $device delete
# 3Com Fast Etherlink 3C574TX
card "3Com" "3C574-TX Fast EtherLink PC Card"
config 0x1 "ep0" ? 0x1
insert logger -t pccard:$device -s 3Com Fast Etherlink 3C574TX inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s 3Com Fast Etherlink 3C574TX removed
remove /sbin/ifconfig $device delete
# 3Com Megahertz 574B
card "3Com" "Megahertz 574B"
config 0x1 "ep0" ? 0x1
insert logger -t pccard:$device -s 3Com Megahertz 574B inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s 3Com Megahertz 574B removed
remove /sbin/ifconfig $device delete
# LinkSys ethernet card
card "E-CARD" "E-CARD"
config 0x20 "ed0" ?
insert logger -t pccard:$device -s "LinkSys card inserted"
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s "LinkSys card removed"
remove /sbin/ifconfig $device delete
# Linksys Combo PCMCIA EthernetCard (model EC2T on box)
card "Linksys" "Combo PCMCIA EthernetCard (EC2T)"
config 0x1 "ed0" ?
insert logger -t pccard:$device -s Linksys Ethernet inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Linksys Ethernet removed
remove /sbin/ifconfig $device delete
#Linksys EtherFast 10/100 PC Card (PCMPC100)
card "Linksys" "EtherFast 10/100 PC Card (PCMPC100)"
config 0x3 "ed0" ?
# config auto "ed0" ?
insert logger -t pccard:$device -s Linksys Fast 100-BaseT inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Linksys Fast 100-BaseT removed
remove /sbin/ifconfig $device delete
# Farallon EtherMac
card "Farallon" "ENet"
config 0x1 "ep0" ?
insert logger -t pccard:$device -s Farallon EtherMac inserted
insert /etc/pccard_ether $device
# insert /etc/pccard_ether $device link0
remove logger -t pccard:$device -s Farallon EtherMac removed
remove /sbin/ifconfig $device delete
# Fujitsu MBH10302
card "PCMCIA MBH10302" "01"
config 0x14 "fe0" ?
insert logger -t pccard:$device -s Fujitsu MBH10302 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Fujitsu MBH10302 removed
remove /sbin/ifconfig $device delete
# NextCom J Link NC5310
card "NextComK.K." "NC5310 Ver1.0 "
config 0x14 "fe0" ?
insert logger -t pccard:$device -s NextCom J Link NC5310 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s NextCom J Link NC5310 removed
remove /sbin/ifconfig $device delete
# HITACHI HT-4840-11
card "HITACHI" "HT-4840-11"
config 0x1a "fe0" ?
insert logger -t pccard:$device -s HT-4840-11 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s HT-4840-11 removed
remove /sbin/ifconfig $device delete
# Danpex (Alloy, etc.) EN-6200P2
card "DANPEX" "EN-6200P2"
config 0x22 "ed0" ?
insert logger -t pccard:$device -s Danpex EN-6200P2 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Danpex EN-6200P2 removed
remove /sbin/ifconfig $device delete
# Fujitsu MBH10303 Ethernet PCMCIA
card "EAGLE Technology" "NE200 ETHERNET LAN MBH10303 "
config 0x1 "fe0" ?
insert /etc/pccard_ether $device
insert logger -t pccard:$device -s Fujitsu MBH10303 inserted
remove /sbin/ifconfig $device delete
remove logger -t pccard:$device -s Fujitsu MBH10303 removed
# Compex Net-A adapter
card "Ethernet" "Adapter"
config 0x1 "ed0" ?
ether 0xff0
insert logger -t pccard:$device -s Compex Net-A adapter inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Compex Net-A adapter removed
remove /sbin/ifconfig $device delete
# Telecom Device SuperSocket RE450T
# Note: There are several revisions of the cardon the market.
# Type A needs no "ether" line.
# Type B needs "ether 0x110" line.
# Type C needs "ether 0xff0" line.
# Yet more revisions exist, reportedly.
# If you see strange MAC address shown by ifconfig command,
# try other config.
card "Ethernet" "Adapter"
config 0x2 "ed0" ?
# ether 0x110 00:e0:98
# ether 0xff0 00:e0:98
insert logger -t pccard:$device -s Telecom SuperSocket RE450T inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Telecom SuperSocket RE450T removed
remove /sbin/ifconfig $device delete
# D-Link DE-660 NE2000 clone
card "D-Link" "DE-660"
config 0x20 "ed0" ? 0x10
insert logger -t pccard:$device -s D-Link DE-660 inserted
insert /etc/pccard_ether $device link0 -link1
remove logger -t pccard:$device -s D-Link DE-660 removed
remove /sbin/ifconfig $device delete
# D-Link DFE-650 NE2000 clone
card "D-Link" "DFE-650"
config 0x20 "ed0" ? 0x10
insert logger -t pccard:$device -s D-Link DFE-650 inserted
insert /etc/pccard_ether $device
# insert /etc/pccard_ether $device link0 -link1
remove logger -t pccard:$device -s D-Link DFE-650 removed
remove /sbin/ifconfig $device delete
# NDC Ethernet Instant-Link NE2000 clone
card "NDC" "Ethernet"
config 0x22 "ed0" ? 0x10
insert logger -t pccard:$device -s NDC Ethernet Instant-Link adapter inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s NDC Ethernet Instant-Link adapter removed
remove /sbin/ifconfig $device delete
# CyQ've ELA-010
card "CyQ've" "ELA-010"
config 0x20 "ed0" ?
insert logger -t pccard:$device -s CyQve ELA-010 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s CyQve ELA-010 removed
remove /sbin/ifconfig $device delete
# Allied Telesis CentreCOM LA100-PCM-T V2
card "Allied Telesis, K.K." "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card"
config auto "ed0" ?
insert logger -t pccard:$device -s Allied Telesis LA100-PCM-T V2 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Allied Telesis LA100-PCM-T V2 removed
remove /etc/pccard_ether_remove $device
# Allied Telesis CentreCOM LA-PCM_V2 ethernet card
# NTT-DATA ASTROWINK-M/MMOIL(IrLAN) ethernet card
card "Allied Telesis, K.K." "CentreCOM LA-PCM_V2"
config 0x20 "ed0" ?
insert logger -t pccard:$device -s CentreCOM LA-PCM V2 Ethernet card inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s CentreCOM LA-PCM V2 Ethernet card removed
remove /sbin/ifconfig $device delete
# Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison)
card "Intel" "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16"
config 0x1 "xe0" ?
insert logger -t pccard:$device -s Intel EtherExpress PRO/100 Mobile Adapter/16 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Intel EtherExpress PRO/100 Mobile Adapter/16 removed
remove /sbin/ifconfig $device delete
# BayNetworks NETGEAR FA410TXC Fast Ethernet
card "NETGEAR" "FA410TX"
config 0x20 "ed0" ?
insert logger -t pccard:$device -s NETGEAR FA410TX Ethernet inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s NETGEAR FA410TX Ethernet removed
remove /sbin/ifconfig $device delete
# Network Everywhere Ethernet 10BaseT PC Card
card "Network Everywhere" "Ethernet 10BaseT PC Card"
config 0x1 "ed0" ?
insert logger -t pccard:$device -s Network Everywhere Ethernet 10BaseT PC Card inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Network Everywhere Ethernet 10BaseT PC Card removed
remove /sbin/ifconfig $device delete
# AIWA PV-JF288
card "AIWA CO.,LTD." "PV-JF288 "
config 0x23 "sio2" ?
insert logger -t pccard:$device -s AIWA PV-JF288 inserted
remove logger -t pccard:$device -s AIWA PV-JF288 removed
# Apex Data 28.8 PC Card "MOBILE PLUS Cellular" modem.
card "AD PC_CARD" "RC288ACL"
config 0x22 "sio2" ?
# config auto "sio2" ?
insert logger -t pccard:$device -s Apex Data Mobile Plus 28.8 Modem inserted
remove logger -t pccard:$device -s Apex Data Mobile Plus 28.8 Modem removed
# Megahertz XJ1144
card "MEGAHERTZ" "XJ1144"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Megahertz XJ1144 inserted
remove logger -t pccard:$device -s Megahertz XJ1144 removed
# Megahertz XJ2144 (US)
card "MEGAHERTZ" "XJ2144"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Megahertz XJ2144 inserted
remove logger -t pccard:$device -s Megahertz XJ2144 removed
# Megahertz XJ2144 (JP)
card "MEGAHERTZ" "XJ2144-81"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Megahertz XJ2144 inserted
remove logger -t pccard:$device -s Megahertz XJ2144 removed
# Megahertz XJ2288
card "MEGAHERTZ" "XJ2288"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Megahertz XJ2288 inserted
remove logger -t pccard:$device -s Megahertz XJ2288 removed
# Megahertz XJ3288
card "MEGAHERTZ" "XJ3288"
config 0x21 "sio2" ?
insert logger -t pccard:$device -s Megahertz XJ3288 inserted
remove logger -t pccard:$device -s Megahertz XJ3288 removed
# Megahertz XJ-CC4288
card "Megahertz" "XJ-CC4288"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Megahertz XJ-CC4288 inserted
remove logger -t pccard:$device -s Megahertz XJ-CC4288 removed
# Megahertz XJ4336
card "Megahertz" "XJ4336-CC4336"
config 0x22 "sio2" ?
# config auto "sio2" ?
# config 0x23 "sio3" ?
insert logger -t pccard:$device -s Megahertz XJ4336 inserted
remove logger -t pccard:$device -s Megahertz XJ4336 removed
# Megahertz XJEM1336 (as modem)
card "MEGAHERTZ" "CC/XJEM3336"
config auto "sio2" ?
insert logger -t pccard:$device -s Megahertz CC/XJEM3336 inserted
remove logger -t pccard:$device -s Megahertz CC/XJEM3336 removed
# Megahertz XJ1336
card "U.S. Robotics" "XJ/CC1336"
config 0x21 "sio2" ?
insert logger -t pccard:$device -s U.S. Robotics XJ/CC1336 inserted
remove logger -t pccard:$device -s U.S. Robotics XJ/CC1336 removed
# Nokia Cellular Data Card
card "Nokia Mobile Phones" "DTP-2"
config 0x22 "sio2" ?
config 0x23 "sio3" ?
insert logger -t pccard:$device -s Nokia Mobile Phones DTP-2 inserted
remove logger -t pccard:$device -s Nokia Mobile Phones DTP-2 removed
# This Nokia example allows either 1 or 2 Nokia cards to be fitted.
# With 2 Mobile Phones and Multilink PPP you can get a 19200 data channel.
# Nokia Cellular Data Card
card "Nokia Mobile Phones" "DTP-2 ver II"
config 0x23 "sio2" ?
config 0x24 "sio3" ?
insert logger -t pccard:$device -s Nokia Mobile Phones DTP-2 ver II inserted
remove logger -t pccard:$device -s Nokia Mobile Phones DTP-2 ver II removed
# Omron ME2814 FAX/DATA MODEM
card "OMRON" "ME2814 FAX/DATA MOD"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s OMRON ME2814 Modem inserted
remove logger -t pccard:$device -s OMRON ME2814 Modem removed
# TDK 14.4 FAX/Data Modem
card "TDK" "DF1414 DATA/FAX MOD"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s TDK DF1414 inserted
remove logger -t pccard:$device -s TDK DF1414 removed
# TDK 14.4 FAX/Data Modem
card "TDK" "DF1414EX DATA/FAX M"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s TDK DF1414 inserted
remove logger -t pccard:$device -s TDK DF1414 removed
# Panasonic Modem Card TO-706C
card "Panasonic" "TO-706C"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Panasonic TO-706C inserted
remove logger -t pccard:$device -s Panasonic TO-706C removed
# Panasonic Modem Card TO-706C
card "Panasonic" "TO-CAF288"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Panasonic TO-CAF288 inserted
remove logger -t pccard:$device -s Panasonic TO-CAF288 removed
# NewMedia 14.4K FAX/Data Modem
card "CIRRUS LOGIC" "FAX MODEM"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Newmedia 14.4 Modem inserted
remove logger -t pccard:$device -s Newmedia 14.4 Modem removed
# Omron MD24XCA FAX/Data Modem
#card "OMRON Corp." "MD24XCA"
# config 0x23 "sio2" ?
# reset 10000
# insert logger -t pccard:$device -s OMRON MD24XCA Modem inserted
# remove logger -t pccard:$device -s OMRON MD24XCA Modem removed
# Hayes OPTIMA 288 FAX/Data Modem
# currently does not work on my machine
card "Hayes" "OPTIMA 288 + FAX fo"
config 0x24 "sio2" ?
reset 10000
insert logger -t pccard:$device -s Optima 288 inserted
remove logger -t pccard:$device -s Optima 288 removed
# This one does work though
card "HAYES" "OPT288"
config 0x23 "sio3" ?
insert logger -t pccard:$device -s Hayes Optima 28.8k inserted
remove logger -t pccard:$device -s Hayes Optima 28.8k removed
# PREMAX FM288 FAX/Data Modem
card "PREMAX" "FM288 "
config 0x23 "sio2" ?
insert logger -t pccard:$device -s PREMAX FM288 Modem inserted
remove logger -t pccard:$device -s PREMAX FM288 Modem removed
# Novalink NovaModem 144
card "NovaLink Tech." "NovaModem 144 "
config 0x23 "sio2" ?
insert logger -t pccard:$device -s NovaModem 144 Modem inserted
remove logger -t pccard:$device -s NovaModem 144 Modem removed
# Option International PCMCIA55K06
card "Option International" "GSM Data/Fax/SMS Modem"
config 0x22 "sio2" ?
insert logger -t pccard:$device -s Option 55K06 Modem inserted
remove logger -t pccard:$device -s Option 55K06 Modem removed
# US Robotics Sportster PCMCIA V.34
# US Robotics COURIER PCMCIA V.34
card "USRobotics" "PCMCIA 28800 Data/F"
config 0x3 "sio2" ?
insert logger -t pccard:$device -s USRobotics PCMCIA Modem inserted
remove logger -t pccard:$device -s USRobotics PCMCIA Modem removed
# Xircom CreditCard Modem
card "Xircom" "CreditCard Modem CM-56T"
config 0x17 "sio1" ?
reset 100
insert logger -t pccard:$device -s Xircom CreditCard Modem CM-56T inserted
remove logger -t pccard:$device -s Xircom CreditCard Modem CM-56T removed
# Xircom CreditCard Ethernet+Modem (Modem only !!!)
card "Xircom" "CreditCard Ethernet"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Xircom CreditCard Modem inserted
remove logger -t pccard:$device -s Xircom CreditCard Modem removed
# Xircom CreditCard Ethernet 10/100 + modem (modem part)
card "Xircom" "CreditCard Ethernet+Modem 33.6"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s Xircom CreditCard Modem inserted
remove logger -t pccard:$device -s Xircom CreditCard Modem removed
# Xircom CreditCard Ethernet 10/100 + modem (Ethernet part)
card "Xircom" "CreditCard Ethernet 10/100 + Modem 56"
config 0x1 "xe0" ?
insert logger -t pccard:$device -s Xircom CreditCard Modem inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Xircom CreditCard Modem removed
remove /sbin/ifconfig $device delete
# Xircom CreditCard Ethernet 10/100
card "Xircom" "CreditCard 10/100"
config 0x1 "xe0" ?
insert logger -t pccard:$device -s Xircom CreditCard Ethernet inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Xircom CreditCard Ethernet removed
remove /etc/pccard_ether $device delete
# Xircom GlobalACCESS modem
card "Xircom" "CreditCard Modem 56 - GlobalA"
config 0x1f "sio2" ?
insert logger -t pccard:$device -s Xircom CreditCard Modem 56 - GlobalACCESS inserted
remove logger -t pccard:$device -s Xircom CreditCard Modem 56 - GlobalACCESS removed
# Xircom Realport card + modem
card "Xircom" "16-bit Ethernet + Modem 56"
config 0x27 "xe0" 9
insert logger -t pccard:$device -s Xircom Realport Ethernet inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Xircom Realport Ethernet removed
remove /etc/pccard_ether $device delete
# GATEWAY 2000 FAX/Data Modem (14.4K)
card "GATEWAY2000" "CC3144"
config 0x22 "sio3" ?
insert logger -t pccard:$device -s GATEWAY2000 FAX/Data Modem inserted
remove logger -t pccard:$device -s GATEWAY2000 FAX/Data Modem removed
# IBM Push/Pop Modem (14.4K)
card "IBM" "Push/Pop Modem(14.4K)"
config 0x22 "sio2" ?
insert logger -t pccard:$device -s IBM Push/Pop Modem inserted
remove logger -t pccard:$device -s IBM Push/Pop Modem removed
# Eiger PCCARD modem
# Apparently this modem does not work unless the recommended
# init string (AT&F&C1&D2) is supplied.
card "PCMCIA " "33.6K Fax/Modem "
config 23 "sio2" ?
insert logger -t pccard:$device -s Eiger 33.6K modem inserted
remove logger -t pccard:$device -s Eiger 33.6K modem removed
# NTT ThunderCard Modem
card "NTT-IT CO., LTD" "ThunderCard AVF288, V.34"
config 0x22 "sio2" ?
insert logger -t pccard:$device -s NTT ThunderCard inserted
remove logger -t pccard:$device -s NTT ThunderCard removed
# U.S. Robotics XJ1560J
card "U.S. Robotics" "XJ/CC1560J"
config 0x22 "sio2" ?
insert logger -t pccard:$device -s U.S. Robotics XJ1560J inserted
remove logger -t pccard:$device -s U.S. Robotics XJ1560J removed
# 3com/USR/Megahertz 3CCM556
card "3Com" "3CXM/3CCM556"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s 3Com PCMCIA 56K Modem inserted
remove logger -t pccard:$device -s 3Com PCMCIA 56K Modem removed
# 3Com/NoteWorthy 56K modem (bundled with Toshiba notebooks)
card "Toshiba America" "3CXM056-BNW"
config 0x20 "sio1" ?
insert logger -t pccard:$device -s NoteWorthy 56K PCMCIA Modem inserted
remove logger -t pccard:$device -s NoteWorthy 56K PCMCIA Modem removed
# BUG Linkboy D64K (ISDN)
card "BUG Inc." "Linkboy D64K"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s BUG Linkboy D64K inserted
remove logger -t pccard:$device -s BUG Linkboy D64K removed
# NTT DoCoMo DATA/FAX Adapter
card "NTT DoCoMo" "PCMCIA DATA/FAX ADAPTER 9600"
config 0x22 "sio3" ? 0x82
insert logger -t pccard:$device -s NTT DoCoMo DATA/FAX Adapter inserted
remove logger -t pccard:$device -s NTT DoCoMo DATA/FAX Adapter removed
# NTT DoCoMo DATA/FAX Adapter
card "NTT DoCoMo" "PCMCIA DATA/FAX ADAPTER 9600 Mark2"
config auto "sio3" ?
insert logger -t pccard:$device -s NTT DoCoMo DATA/FAX Adapter inserted
remove logger -t pccard:$device -s NTT DoCoMo DATA/FAX Adapter removed
# NTT DoCoMo Mobile D Card 96P1
card "NTT DoCoMo" "Mobile D Card 96P1"
# config 0x22 "sio2" ? 0x82
config 0x23 "sio3" ? 0x82
# config auto "sio3" ? 0x82
insert logger -t pccard:$device -s NTT DoCoMo Mobile D Card 96P1 inserted
remove logger -t pccard:$device -s NTT DoCoMo Mobile D Card 96P1 removed
# Random modem bundled with Dell systems
card "Psion Dacom" "Gold Card Global 56K+Fax"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s "Psion Dacom modem card inserted"
remove logger -t pccard:$device -s "Psion Dacom modem card removed"
# Actiontec Datalink with v.90 upgrade
card "PCMCIA " "56K V.90 Fax Modem (LK) "
config 0x1f "sio2" ?
insert logger -t pccard:$device -s "Actiontec Datalink modem card inserted"
remove logger -t pccard:$device -s "Actiontec Datalink modem card removed"
# Panasonic FM-RADIO card
#card "Panasonic" "CF-JVR101"
# config 0x22 "sio3" ?
# insert logger -t pccard:$device -s Panasonic FM radio card inserted
# remove logger -t pccard:$device -s Panasonic FM radio card removed
# IO Data CBIDE (bundled with CDP-FX24, etc.)
card "WIT" "IDE16"
config auto "ata0" ?
insert logger -t pccard:$device -s IO Data CBIDE inserted
remove logger -t pccard:$device -s IO Data CBIDE removed
# IBM Flash ATA (Ricoh Flash ATA 10MB)
card "IBM" "IBM17JSSFP10"
config auto "ata0" ? iosize 16
insert logger -t pccard:$device -s IBM Flash ATA inserted
remove logger -t pccard:$device -s IBM flash ATA removed
# Non-brand Compact Flash Card(32MB)
card " " "KCF 32M"
config 0x1 "ata2" ? iosize 16
insert logger -t pccard:$device -s Compact Flash Card 32MB inserted
remove logger -t pccard:$device -s Compact Flash Card 32MB removed
# SunDisk Flash ATA
# (OEM: Epson Flash Packer)
card "SunDisk" "SDP5"
config 0x1 "ata2" ?
insert logger -t pccard:$device -s Sundisk Flash ATA inserted
remove logger -t pccard:$device -s Sundisk Flash ATA removed
card "SunDisk" "SDP"
config 0x1 "ata2" ?
insert logger -t pccard:$device -s SunDisk Flash ATA Inserted
remove logger -t pccard:$device -s SunDisk Flash ATA removed
# Midori Elec Fast Flash
card "Midori Elec." "FAST FLASH"
config 0x3 "ata2" ?
insert logger -t pccard:$device -s Midori Elec Fast FLASH inserted
remove logger -t pccard:$device -s Midori Elec Fast FLASH removed
# Simple Technology ata flash
card "Simple Technology " "STI-ATA"
config 0x2 "ata2" ?
insert logger -t pccard:$device -s Simple Technology ata FLASH inserted
remove logger -t pccard:$device -s Simple Technology ata FLASH removed
# Viking ATA Flash card
card "VIKING ATA/CF FLASH CARD " "TOR/AM "
config 0x2 "ata2" ?
insert logger -t pccard:$device -s Simple Technology ata FLASH inserted
remove logger -t pccard:$device -s Simple Technology ata FLASH removed
# Maxtor 131MB Type III HDD
card "Maxtor" "MXL131"
config 0x03 "ata2" ?
insert logger -t pccard:$device -s Maxtor 131MB HDD inserted
remove logger -t pccard:$device -s Maxtor 131MB HDD removed
# SiliconTech, Inc flash card
card "SiliconTech,Inc" "16MB Compact PC Card"
config 0x1 "ata2" ?
insert logger -t pccard:$device -s SiliconTech Flash ATA inserted
remove logger -t pccard:$device -s SiliconTech Flash ATA removed
# Adaptec SlimSCSI (also included with Sony CD-ROM players)
card "Adaptec, Inc." "APA-1460 SCSI Host Adapter"
config 0x9 "aic0" ?
insert logger -t pccard:$device -s Adaptec Slim SCSI inserted
remove logger -t pccard:$device -s Adaptec Slim SCSI removed
# NewMedia Bustoaster SCSI
card "New Media" "SCSI"
config 0x22 "aic0" ?
insert logger -t pccard:$device -s New Media Bus Toaster inserted
remove logger -t pccard:$device -s New Media Bus Toaster removed
# REX5535AC, REX5535X SCSI
#card "PCMCIA SCSI MBH1040" "01"
# config 0x3a "spc0" ?
# insert logger -t pccard:$device -s REX-5535 SCSI card inserted
# remove logger -t pccard:$device -s REX-5535 SCSI card removed
# Libretto Floppy disk
card "Y-E DATA" "External FDD"
config 0x4 "fdc0" ?
insert logger -t pccard:$device -s Libretto Floopy Disk inserted
remove logger -t pccard:$device -s Libretto Floopy Disk removed
# Viking V.90/K56Flex modem
card "Viking" "V.90 K56flex"
config 0x23 "sio3" ?
insert logger -t pccard:$device -s Viking 56K Modem inserted
remove logger -t pccard:$device -s Viking 56K Modem removed
# Zoom 56K modem
# Freezes your system entirely if you don't have the reset..
card "Zoom Telephonics, Inc." "PCMCIA 56K LT DataFax"
config 0x1f "sio2" ?
reset 1000
insert logger -t pccard:$device -s Zoom modem inserted
remove logger -t pccard:$device -s Zoom modem removed
# 3Com Megahertz 3CCE589E* 10 Mbps LAN PC Card
card "3Com" "Megahertz 589E"
config 0x1 "ep0" ?
# config auto "ep0" ?
insert logger -t pccard:$device -s 3Com Megahertz Ethernet card inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s 3Com Megahertz Ethernet card removed
remove /sbin/ifconfig $device delete
#AR-P500 ethernet card
card "IC-CARD" "IC-CARD"
config 0x20 "ed0" ?
insert logger -t pccard:$device -s AR-P500 Ethernet card inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s AR-P500 Ethernet card removed
remove ifconfig $device delete
# 3Com/USR/MegaHertz 3CCM156
card "3COM" "3CCM156"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s 3Com PCMCIA 56K modem inserted
remove logger -t pccard:$device -s 3Com PCMCIA 56K modem removed
#Eiger 33.6 modem
card "AT&T" "V34+ Fax Modem"
config 0x23 "sio1" ?
insert logger -t pccard:$device -s Eiger 33.6K modem inserted
remove logger -t pccard:$device -s Eiger 33.6K modem removed
# Motorola Montana
card "Motorola" "MONTANA 33.6 FAX/MODEM"
config 0x21 "sio1" ?
insert echo Motorola Montana 33.6K FAX/modem inserted
remove echo Motorola Montana 33.6K FAX/modem removed
# AT&T Paradyne KeepInTouch 14.4 modem
card "AT&T Paradyne" "KeepInTouch Card"
config 0x23 "sio3" ?
reset 1000
insert logger -t pccard:$device -s ATT Paradyne 14.4 inserted
remove logger -t pccard:$device -s ATT Paradyne 14.4 removed
# AmbiCom 10BaseT card
card "AmbiCom Inc" "AMB8002T"
config 0x20 "ed0" ?
insert logger -t pccard:$device -s AmbiCom 8002T inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s AmbiCom 8002T removed
remove /sbin/ifconfig $device delete
# 3Com OfficeConnect 3CXSH572BT
#This had auto, so the config slot might be wrong. Replace it by the
#one that pccardc dumpcis tells you is default.
#
card "3Com" "OfficeConnect 572B"
config 0x1 "ep0" ? 0x1
insert logger -t pccard:$device -s 3Com 3CXSH572BT inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s 3Com 3CXSH572BT removed
remove /sbin/ifconfig $device delete
# Elecom Laneed LD-CDF
card "Laneed" "LD-CDF"
config 0x20 "ed1" ?
insert logger -t pccard:$device -s Elecom Laneed LD-CDF inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Elecom Laneed LD-CDF removed
remove /sbin/ifconfig $device delete
# NTT DoCoMo (formerly NTT Personal) FAX/Data 32K PHS Card Paldio 321S
card "NTT Personal" "32K Paldio 321S PC CARD"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s NTT Personal Paldio 321S PC Card inserted
remove logger -t pccard:$device -s NTT Personal Paldio 321S PC Card removed
# NTT DoCoMo (formerly NTT Personal) FAX/Data 32K PHS Card Paldio 341S
card "NTT Personal" "32K Paldio 341S PC CARD"
config 0x23 "sio2" ?
insert logger -t pccard:$device -s NTT Personal 32K Paldio 341S PC Card inserted
remove logger -t pccard:$device -s NTT Personal 32K Paldio 341S PC Card removed
# Allied Telesis Ethernet Card inserted
card "Allied Telesis,K.K" "Ethernet LAN Card"
config 0x1 "ed1" ? 0x10
ether 0xff0
insert logger -t pccard:$device -s Allied Telesis Ethernet Card inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Allied Telesis Ethernet Card removed
remove /sbin/ifconfig $device delete
# Panasonic KX-PH402D
card "Panasonic" "KX-PH402D"
config 0x23 "sio4" ?
insert logger -t pccard:$device -s Panasonic KX-PH402D inserted
remove logger -t pccard:$device -s Panasonic KX-PH402D removed
# Megahertz X-Jack Ethernet
card "Megahertz" "CC10BT/2"
config 0x1 "sn0" ?
ether attr2
insert logger -t pccard:$device -s Megahertz X-Jack Ethernet inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Megahertz X-Jack Ethernet removed
remove /etc/pccard_ether_remove $device
# Surecom EtherPerfect EP-427
card "TAMARACK" "Ethernet"
config 0x21 "ed0" ?
insert logger -t pccard:$device -s Surecom Ethernet card inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Surecom Ethernet card removed
remove ifconfig $device delete
# COREGA Ether PCC-T
card "corega K.K." "corega Ether PCC-T"
config 0x20 "ed0" ?
# config auto "ed0" ?
insert logger -t pccard:$device -s Ether PCC-T inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Ether PCC-T removed
remove /etc/pccard_ether_remove $device
# Planex FNW-3600-T 16bit FastEthernet
card "Fast Ethernet" "Adapter"
config 0x7 "ed0" ?
iosize 32
insert logger -t pccard:$device -s Planex FNW-3600-T inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Planex FNW-3600-T removed
remove /etc/pccard_ether_remove $device
# IC-CARD+ Ethernet card
card "IC-CARD+" "IC-CARD+"
config auto "ed0" ?
insert logger -t pccard:$device -s IC-CARD+ Ethernet card inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s IC-CARD+ Ethernet card removed
remove ifconfig $device delete
# Banksia CardModem 56
card "PCCardModem" "CardModem 56"
config 0x22 "sio3" ?
insert logger -t pccard:$device -s Banksia CardModem 56 inserted
remove logger -t pccard:$device -s Banksia CardModem 56 removed
# Apollo PCMCIA Ethernet Adapter
card "Ethernet" "Adapter"
config 0x0 "ed0" ?
insert logger -t pccard:$device -s Apollo PCMCIA Ethernet Adapter inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Apollo PCMCIA Ethernet Adapter removed
remove /sbin/ifconfig $device delete
# Olicom OC2220
card "Olicom" "Ethernet"
config 0x1 "ex0" ?
insert logger -t pccard:$device -s Olicom OC2220 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Olicom OC2220 removed
remove /sbin/ifconfig $device delete
# National Semiconductor InfoMover NE4100
card "National Semiconductor" "InfoMover NE4100"
config 0x1 "ed0" ?
ether 0xff0
insert logger -t pccard:$device -s National Semiconductor InfoMover NE4100 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s National Semiconductor InfoMover NE4100 removed
remove /sbin/ifconfig $device delete
# Melco Airconnect
card "MELCO" "WLI-PCM-L11"
config 0x1 "wi0" ?
# COM1 SA
card "COM1 SA" "MC220 CARD"
config 0x3 "sio2" ?
insert logger -t pccard:$device -s COM1 SA MC220 CARD Modem inserted
remove logger -t pccard:$device -s COM1 SA MC220 CARD Modem removed
insert logger -t pccard:$device -s Melco Airconnect inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Melco Airconnect removed
remove /sbin/ifconfig $device delete
To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Wed 17 Jan 2001 - 21:40:07 CET