ed0 disabled

                        Guten Morgen, Alle!
Bei einer meinen Freund ist folgende Situation:
Er entfernte aus dem Kernel (FreeBSD-3.4) alle unnotige Devices.
Doch waerend der Ladung sucht das System diese sowieso zu
disablen (automatische Config-Mode?). Dabei wird ed0 entfernt
(ed1 & ed2 geblieben). Um das zu korrigieren, soll er manual
in config-mode uebergehen und ed0 enablen. Ein Schnitt von dmesg:

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 3.4-RELEASE #1: Fri Mar 17 10:47:57 MSK 2000
    root(at)mow.sirena.ru:/usr/src/sys/compile/MOW
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 132955354 Hz
CPU: Pentium/P54C (132.96-MHz 586-class CPU)
  Origin = "GenuineIntel" Id = 0x52c Stepping = 12
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
config> di psm0
No such device: psm0
Invalid command or syntax. Type `?' for help.
config> di ppc0
No such device: ppc0
Invalid command or syntax. Type `?' for help.
config> di ze0
No such device: ze0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ex0
No such device: ex0
Invalid command or syntax. Type `?' for help.
config> di ed0
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di wt0
No such device: wt0
Invalid command or syntax. Type `?' for help.
config> di scd0
No such device: scd0
Invalid command or syntax. Type `?' for help.
config> di mcd0
No such device: mcd0
Invalid command or syntax. Type `?' for help.
config> di matcdc0
No such device: matcdc0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
FreeBSD Kernel Configuration Utility - Version 1.2
 Type "help" for help or "visual" to go to the visual
 configuration interface (requires MGA/VGA display or
 serial terminal capable of displaying ANSI graphics).
config> enam\^H \^Hble ed0
config> q
avail memory = 62799872 (61328K bytes)
Preloaded elf kernel "kernel" at 0xc024a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc024a09c.
Probing for devices on PCI bus 0:
chip0: <Intel 82437FX PCI cache memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371FB PCI to ISA bridge> rev 0x02 on pci0.7.0
vga0: <VGA-compatible display device> rev 0x01 int a irq 11 on pci0.14.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed1 at 0x320-0x33f irq 12 on isa
ed1: address 00:c0:6c:58:14:52, type NE2000 (16 bit)
ed2 at 0x340-0x35f irq 5 on isa
ed2: address 00:c0:6c:58:14:44, type NE2000 (16 bit)
ed0 at 0x300-0x31f irq 10 on isa
ed0: address 00:c0:6c:58:14:65, type NE2000 (16 bit)

Was zu machen?
TIA Sergej

To Unsubscribe: send mail to majordomo(at)de.FreeBSD.org
with "unsubscribe de-bsd-questions" in the body of the message
Received on Wed 22 Mar 2000 - 08:24:54 CET