Re: Netzkarte intel

From: Martin Welk <mw(at)>
Date: Mon, 8 Nov 1999 05:27:11 +0100

On Sun, Nov 07, 1999 at 11:21:55PM +0100, Micha Borrmann wrote:

> ich versuche eine intel EtherExpress PRO/10+ ISA unter FreeBSD
> anzusprechen (2.2.5). Im LINT file zur Kernelkonfiguration finde ich aber
> nur den Eintrag zur EtherExpress PRO/100B PCI. Welchen Eintrag benutze ich
> fuer diese Karte, oder unterstuetzt FreeBSD diese Karte gar nicht?

Mein LINT File (3.3-STABLE) meint:

# ex: Intel EtherExpress Pro/10 and other i82595-based adapters


device ex0 at isa? port? net irq?

ebenso steht sie im GENERIC kernel, und ex(4) meint:

     The ex driver provides support for the 16-bit PCI Intel EtherExpress
     Pro/10 and Pro/10+ Ethernet cards based on the Intel i82595 chip.

     If the port start address isn't found, the card will be searched for in
     the I/O address range 0x200 - 0x3a0. If the IRQ isn't specified, it will
     be read from the EEPROM on the card. For correct operation on newer
     cards the Plug-N-Play support should be disabled.


     The ex device driver first appeared in FreeBSD 2.2.

Auf einen "mir bekannten" 2.2.8-STABLE ist der Treiber vorhanden, auf
einem anderen 2.2.5-STABLE auch.

Viel Glück.


 /| /|        | /| /            ,,You know, there's a lot of opportunities,
/ |/ | artin  |/ |/ elk                     if you're knowing to take them,
                                  you know, there's a lot of opportunities,
Freiberg/Saxony, Germany                 if there aren't you can make them,
mw(at)              make or break them!'' (Tennant/Lowe)
To Unsubscribe: send mail to majordomo(at)
with "unsubscribe de-bsd-chat" in the body of the message
Received on Mon 08 Nov 1999 - 17:53:52 CET

search this site